Tata AutoComp Systems Limited

会社概要

■URL

https://tataautocomp.com

■本社所在地

F-Block, Plot no. A-79, Chakan MIDC Industrial Area Phase 2, Savardari, Tal. Khed, Pune 410501 India

業容

-Tata Groupの傘下企業。Tata Motorsが関連会社として26%の株式を保有。

-以下の製品・サービスにわたり、同社及び傘下企業を通じてソリューションを提供

セグメント 製品・サービス 部門・傘下企業
セーフティ&コンフォート (Safety and Comfort) 樹脂部品 Tata AutoComp Systems コンポジット部門
キネマティックプラスチック部品 Nanjing Tata AutoComp Systems Limited
高性能複合システム部品 Tata AutoComp Systems – コンポジット部門
ミラー、ウォッシャー、ADAS、テレマティクス Tata Ficosa Automotive Systems
HVAC TACO Air International Thermal Systems
シートシステム TM Automotive Seating system
パワートレイン、クーリング&エミッション
(Powertrain, Cooling & Emission)
M&HDトラック用パワートレイン冷却ソリューション TITANX
エンジン冷却ソリューション、EGR及びオイルクーラー Tata Toyo Radiator Ltd
排気・排ガス後処理ソリューション Tata AutoComp Katcon Exhaust Systems Pvt. Ltd.
ギアシフター Tata Ficosa Automotive Systems
パーキングブレーキレバー Tata Ficosa Automotive Systems
電動モーター冷却ソリューション Tata AutoComp Systems Limited
アクスル&サスペンション、BIW、エレクトリカル
(Axles & Suspension, BIW, Electrical)
オートモーティブ、インバーターバッテリー Tata AutoComp GY Batteries Pvt. Ltd.
バッテリー冷却システム TACO Air International Thermal Systems Pvt. Ltd.
バッテリーパック Tata AutoComp EV Business- Battery Pack and BMS
大型商用車用サスペンションシステム TATA AutoComp Hendrickson Suspensions Pvt. Ltd
板金部品 Automotive Stampings and Assemblies
電動モーター TACO Prestolite Electric
アフターマーケット&サービス (Aftermarket & Services) アフターマーケット Tata AutoComp System – アフターマーケット
サプライチェーンソリューション Tata Autocomp Systems – サプライチェーンソリューション
エンジニアリングサービス Tata Autocomp Systems – エンジニアリングサービス
充電器 Tata Autocomp Systems

-Tata AutoCompはインド国内に37の製造拠点、北米、中南米、欧州、中国などインド国外に9の製造拠点を保有している。

主要製品

内装および樹脂部門

外装部品

  • ルーフレール (Roof rail)
  • ドアトリム (Door Trim)
  • サイドミラースカルキャップ (ORVM Skull Cap)
  • プレナム (Plenum)
  • ウォッシャータンク (Washer Tank)
  • エアディフレクター (Air Deflector)
  • ホイールアーチ (Wheel Arch)
  • ホイールクラッド (Wheel cladding)
  • ピラートリム (Pillar Trim)
  • バンパー (Bumper)
  • スポイラー (Spoiler)
  • フロントグリル (Front Grill)
  • ボディサイドモールディング (Body side Molding)
  • テールゲートウェイストトリム (Tailgate Waist Trim)

内装部品

  • アームレスト (Arm rest)
  • エンジンルーム内部品 (Underhood parts)
  • デフロストグリル (Defrost grill)
  • コックピット (Cockpit)
  • ダッシュボード (Dashboard)
  • コンソール (Consoles)
  • シリンダーヘッドカバー (Cylinder Head Covers)
  • タイミングカバー (Timing Covers)
  • 送風口 (Air Vents)
  • フロアコンソール (Floor Console)

 

複合材部門

  • フロントパネル (Front Panel)
  • ロードボディコンポジット (Load Body Composites)
  • ワイパーカバー (Wiper Cover)
  • トリムピラー (Trim Pillars)
  • バンパー (Bumper)
  • フェンダー (Fender)
  • ドアアドオン (Door Add-on)
  • ボディサイドアドオン (Body Side Add-on)

  

Engine and Powertrain cooling TitanX

  • エンジン冷却モジュール (Engine Cooling modules)
  • オイルクーラー (Oil coolers)
  • バス冷却 (Bus cooling)
  • リターダーオイルクーラー (Retarder oil coolers)
  • エンジン及びトランスミッションオイルクーラー (Engine and transmission oil coolers)

Automotive Stampings and Assemblies Ltd. (ASAL)

  • パネルフロントドア (Panel front door)
  • サイドパネルアウター (Side panel outer)
  • サイドウォールアウターASSY (Assembly side wall outer)
  • フロントパネルアウターASSY (Assembly front panel outer)
  • フロントキャビンシールド (Front cabin shield)
  • フロントバンパーASSY (Assembly front bumper)
  • アウターテールゲートASSY (Assembly outer tailgate)
  • BIW部品 (BIW Components)
  • フロントサスペンションモジュール (Front suspension modules)
  • クロスメンバーASSY (Assembly cross member)
  • リアサスペンションモジュール (Assembly rear suspension module)
  • セミトレーリングアームASSY (Assembly semi trailing arm)
  • オイルサンプ (Oil sump)
  • 燃料タンク (Fuel tank)

Nanjing Tata AutoComp Systems Ltd. (NTACS)

  • 送風口および装飾トリム (Air vent and decor trim)
  • デバイスドック (Device dock)
  • ストレージボックス (Storage box)
  • カップホルダー (Cup holder)
  • アシストグリップ (Grab handle)
  • 送風口パネル (Air vent panel)
  • インナードアモジュール (Door module inner)
  • シルフィニッシャー (Sill finisher)
  • ドアクラッド (Door cladding)
  • ホイールアーチ (Wheel arch)
  • 中型射出成形部品 (Mid-size injection parts)

Tata Toyo Radiator Ltd. (TTRL)

  • エンジン冷却システム (Engine cooling system)
  • ラジエーター (Radiator)
  • インタークーラー (Intercooler)
  • EGRクーラー (EGR cooler)
  • コンデンサー (Condenser)
  • オイルクーラー (Oil cooler)
  • ヒーターコア (Heater core)
  • コンデンサー・ラジエーター・ファンモーター・インタークーラーASSY (CRFMI: Assembly of condenser radiator fan motor intercooler)

Tata AutoComp GY Batteries Ltd. (TGYL)

  • バッテリー (乗用車、MUV、SUV、2輪、商用車用)

Tata Ficosa Automotive Ltd. (Tata Ficosa)

  • リアビューミラー (Rear View Mirror)
  • パーキングブレーキレバー (Park brake lever)
  • ギアシフター (Gear shifters)
  • カメラモニタリングシステム (Camera monitoring system)
  • サラウンドビューシステム (Surround view system)
  • 後方カメラシステム (Rear view camera system)
  • V2Xシステム (V2X Systems)
  • 車載テレマティクスユニットおよびHMI (In Vehicle Telematic Unit and HMI)
  • スマートコネクティビティモジュール (Smart Connectivity Module)
  • アンテナ (Antenna)
  • 車載充電器 (On Board Charger)
  • EBox (Electrical Box)
  • パーキングブレーキシステム (Parking brake system)
  • バッテリーマネジメントシステム (Battery management systems)
  • バッテリーパックASSY (Battery pack assembly)
  • TCU 4G
  • TCU 3G low cost
  • ウォッシャーシステム (Washer Systems)

TATA AutoComp Hendrickson Suspensions Private Ltd.

  • 補助サスペンション (リフトアクスル) (Auxiliary suspensions (lift axle))
  • 先進ゴム・金属サスペンションシステム (Advanced rubber –metal suspension systems)
  • ボギー式サスペンションシステム (Bogie suspensions systems)
  • バス用エアサスペンション (Bus air suspension systems)
  • バス用フロントエアサスペンション及びステアアクスルシステム (Integrated Front Air Suspension and Steer Axle System for Bus)
  • エアサスペンションシステム (Air suspension systems)
  • パラボリックスプリング (Parabolic springs)
  • リフトアクスルサスペンションシステム (Lift axle suspension system)
  • 機械式サスペンション (Mechanical Suspensions)

Tata AutoComp Katcon Exhaust Systems Limited

  • 触媒コンバーター (Catalytic converters)
  • チューブ (Tubes)
  • エギゾーストマニホールド (Exhaust manifolds)
  • DOC+DPF EURO5床下シールド (DOC+DPF Euro5 underfloor shielded)
  • Euro4およびEuro5適合DOC(Diesel Oxidation Catalyst)加熱システム (DOC Euro4 and Euro5 Warm Up) 
  • ディーゼル微粒子除去装置 (DPF: Diesel particulate filters)
  • 近位連結排気ガス後処理システム (Close coupled after-treatment)
  • マニホールド内蔵型触媒コンバーター (Manifold mounted converters)
  • 農業機械用SCR (SCR: Selective Catalyst Reduction) (Agriculture SCR)
  • 排気システム (Exhaust systems)

TM Automotive Seating System Limited

  • シートシステム (乗用車、SUV、商用車) (Seating systems for passenger cars, SUV and commercial vehicles)

Air International TTR Thermal Systems

  • バッテリー冷却HVAC (Battery Cooling HVAC)
  • サーマルシステム (Complete Vehicle Thermal System)
  • HVACユニット (HVACユニット)
  • コントロールパネル (Control Panel)
  • コンプレッサー (Compressor)
  • コンデンサー (Condenser)
  • エバポレーター (Evaporator)
  • ヒーターコア (Heater Core)
  • バッテリーサーマルマネジメントシステム (Battery thermal management system)
  • ルーフHVAC (Roof HVAC)

Tata AutoComp EV Business

  • バッテリーパック及びBMS (Battery Pack and BMS)

Taco Prestolite Electric

  • 統合ドライブトレイン (Integrated DriveTrain)
  • モーター及びコントローラー (Motors and Controllers)
  • ベルトスタータージェネレーター (Belt Starter Generator)
  • スターター及びオルタネーター (Starter and Alternators)

沿革

1995年 Johnson Controls Holding Company Inc.と、インド国内におけるシートシステムの設計・開発・エンジニアリング・生産に関する合弁会社を設立。
1997年 下記の合弁会社を設立。
-東洋ラジエーター (現ティラド) および三菱商事と、Tata Toyo Radiator Pvt. Ltd.を設立
-矢崎総業とTata Yazaki AutoComp Pvt. Ltd.を設立
-ニフコとTata Nifco Fasteners Pvt. Ltd.を設立
1997年 JBM Tools Ltd.の創設者S.K. Arya氏と共にJBM Tools Ltd.へ出資。2003年8月1日付で、社名をAutomotive Stampings and Assemblies Ltd.へ変更。
2000年 米国のOwens Corningと合弁会社Automotive Composite Systems (International) Pvt. Ltd.を設立。
*この会社は、2010年3月5日付でTACOのが子会社し、TACOCLへ社名変更。
2000年 二輪を含め、排気システムの設計開発・生産でユタカ技研と合弁会社Tata Yutaka AutoComp Pvt. Ltd.を設立。
2002年 Knorr Bremse Far East Ltd.とエアブレーキシステム生産の合弁会社Knorr Bremse Systems for Commercial Vehicles (India) Pvt. Ltd.を設立。
2004年 フランスのFaurecia Automotive Holdingsと、自動車用内装システムの設計サービスの合弁会社TACO Faurecia Design Center Pvt. Ltd.を設立。
2004年 完全子会社Tata Auto Plastic Systems Ltd.を4月1日付で併合。
2005年 ドイツのWundsch Weidinger GmbHを買収。
2005年 2月、シンガポールのMobiApps Holdings Pvt. Ltd.と合弁会社TACO MobiApps Telematics Ltd.を設立。
2005年 6月、米国のVisteon International Holding Inc.と合弁会社Tata Visteon Automotive Pvt. Ltd.およびTACO Visteon Engineering Pvt. Ltd.を設立。Tata Visteonは、パワートレインおよびライティング製品分野、一方TACO Engineering は、自動車部品の設計開発分野。
2005年 10月、GS Yuasa International Ltd.とTataAutoComp GY Batteries Pvt. Ltd.を設立。
2006年 6月、米国のHendrickson International Corporationと合弁会社TACO Hendrickson Suspensions Pvt. Ltd.を設立。
2006年 Gestamp Servicios, S.L. がAutomotive Stampings and Assemblies Ltd.に出資。
2006年 Tata Yutaka AutoComp Pvt. Ltd.の株式をユタカ技研へ譲渡。
2006年 10月、Tata Nifco Fasteners Ltd. (TNFL) は事業停止を決定。
2008年 10月、合弁会社TJCALは、ドイツのISRINGHAUSEN GmbH & Co. KGと合弁会社ISRI TJC Pvt. Ltd.を設立。
2009年 Technical Stampings and Automotive Ltd.の株式を譲渡。
2009年 Taco Faurecia Design Center Pvt. Ltd.の株式を譲渡。
2009年 IPM Inc. が保有するAutomotive Composite Systems (International) Ltd. (現TACOCL) の株式を取得し、完全子会社化。
2010年 Knorr Bremse Systems for Commercial Vehicles (India) Pvt. Ltd.を譲渡。
2010年 Gestamp Servicios, S.L.が保有する Automotive Stampings and Assemblies Ltd.の株式を取得。
2012年 Tata Yazaki AutoComp Limited (TYA) の全株式を矢崎総業に売却。
2013年 Tata Johnson Controls Automotive (TJCAL) の全株式をJohnson Controlsに売却。
2013年12月 同社とティラドの合弁会社Tata Toyo Radiatorは、Air International Thermal Systemsと折半出資合弁会社を設立。
2014年09月 Magna Internationalと、シートシステムの合弁会社を設立することで合意。
2014年10月 メキシコのKatcon Globalと、排気システムの合弁会社を設立することで合意。
2016年8月 パワートレイン冷却システムのサプライヤーであるTitanX Engine Coolingを買収。
2017年1月 Titanx Engine Coolingの買収を完了。
2019年3月 Tritium Pty Ltd.と覚書を締結。
2019年4月 国軒高科との合弁会社を設立。
2019年6月 SECO Seojinとの合弁会社を設立。
2020年1月 EVパワートレイン事業で北京佩特来電器有限公司と合弁契約を締結。
バッテリーパックおよびモーターの生産でTata Motorsと協業。
2020年6月 米国のTellus Power GreenとACおよびDC急速充電器導入に関する覚書を締結。
2022年02月 Automotive Stampings and Assemblies Limited (ASAL) の工場で生産を開始。
2022年09月 Punch Powertrainとの合弁会社を設立

補足 1

>>>2015年3月期の動向
>>>2016/2017年3月期の動向

(注) 本文中のカッコ内の数字は、減少幅や損失を指すマイナスを示しています。