Tata AutoComp Systems Ltd.

Company Profile




TACO House, Damle Path, Off Law College Road, Pune 411004, India

Business Overview

-A subsidiary of the Tata Group, in which Tata Motors holds a 26% stake as an affiliate.

-Providing solutions through the company and its subsidiaries across the following products and services.

Segment Product and Services Division and Subsidiaries
Safety and Comfort Interiors & Exterior Plastic Components & Aggregates Interiors & Plastics Division
High-Performance Composites Parts Composites Division
ADAS, Telematics, BMS, Mirrors, Gear Shift Lever, Parking Brake Lever, Washer System tata Ficosa Automotive System
Seating System For Commercial & Passenger Vehicle TM Seating Systems
Heatin Ventilations & Air conditioning Systems (HVAC) Air International TTR Thermal
Interior and Exterior Plastic Assemblies and Kinematic Interior Plastic Systems Nanjing Tata Autocomp Systems
Powertrain, Cooling &Emission Powertrain Cooling solutions TITANX
Radiator, Fan Motor, Intercooler, Condensor, Heater core, EGR & Oil Cooler Tata Toyo Radiator
Exhaust and Emission after treatment solutions  Tata Autocomp Systems Katcon Exhaust Systems
Axles & Suspension, BIW, Electrical Suspension Systems for Heavy Commercial Vehicles Hendrickson Suspensions
Sheet Metal Parts & Aggregates Automotive Stampings and Assemblies
Automotive and Inverter Batteries Tata Autocomp Systems GY Batteries
Aftermarket & Services Aftermarket Parts -
Supplu Chain Management Solutions -
Engineering Services -

-Tata AutoComp manufactures and markets automotive components and systems like engine cooling solutions, automotive batteries, rear view mirrors, command systems, HVAC, exhaust and emission control systems, seating systems, Batter Pack, Battery Cooling System, Battery Management System, Motors, Controllers, Integrated Drivetrain (Integrated Motor, Inverter and Reducer), EV Chargers and electronic solutions for passenger and commercial vehicles as well as suspensions for heavy commercial vehicles.

-51 manufacturing sites in India, North America, Latin America, Europe and China.


Interior and Plastics Division (IPD) of Tata AutoComp Systems

Exterior components

  • Roof rail
  • Door Trim
  • ORVM Skull Cap
  • Plenum
  • Washer Tank
  • Air Deflector
  • Wheel arch
  • Wheel cladding
  • Pillar Trim
  • Bumper
  • Spoilers
  • Front Grill
  • Body side molding

Interior components

  • Arm rest
  • Underhood parts
  • Defrost grill
  • Cockpit
  • Dashboard
  • Consoles
  • Cylinder Head Covers
  • Timing Covers
  • Air Vents
  • Floor Console


Composites Division of Tata AutoComp Systems

  • External body panels
  • Structural parts
  • NVH parts


Engine and Powertrain cooling TitanX

  • Engine Cooling modules
  • Oil coolers
  • Bus cooling
  • Retarder oil coolers
  • Engine and transmission oil coolers

Automotive Stampings and Assemblies Ltd. (ASAL)

  • Cabin floor
  • Roof
  • Mudguard
  • Side panel
  • Front door panel
  • Face side for truck/bus
  • Bonnet outer part
  • Tie member front
  • Rear quarter glass
  • Panel A pillar
  • Door inner
  • Body in white parts
  • Top shell for fuel tank (PV)
  • Shell for fuel tank (2 Wh)
  • Brace for fuel tank (2 Wh)
  • Internal supporting parts
  • Reinforcement parts
  • Clutch cover for HCVs
  • Rear floor
  • Cross member
  • Suspension tower rear
  • Oil sump
  • A-pillar


Nanjing Tata AutoComp Systems Ltd. (NTACS)

  • Air vent and decor trim
  • Device dock
  • Storage box
  • Cup holder
  • Grab handle
  • Air vent panel
  • Door module inner
  • Sill finisher
  • Door cladding
  • Wheel arch 

Tata Toyo Radiator Ltd. (TTRL)

  • Engine cooling system
  • Radiator
  • Intercooler
  • EGR cooler
  • Condenser
  • Oil cooler
  • Heater core
  • CRFMI (CRFMI: Assembly of condenser radiator fan motor intercooler)

Tata AutoComp GY Batteries Ltd. (TGYL)

  • Batteries for Cars, MUVs, SUVs, Two-wheelers, Commercial Vehicles

Tata Ficosa Automotive Ltd. (Tata Ficosa)

  • Rear View Mirror
  • Park brake lever
  • Gear shifters
  • Camera monitoring system
  • Surround view system
  • Rear view camera system
  • V2X Systems
  • In Vehicle Telematic Unit and HMI
  • Smart Connectivity Module
  • Antenna
  • On Board Charger
  • Electrical Box
  • Parking brake system
  • Battery management systems
  • Battery pack assembly
  • Driver drowsiness system
  • Gear shift actuators 

TATA AutoComp Hendrickson Suspensions Private Ltd.

  • Auxiliary suspensions (lift axle)
  • Advanced rubber –metal suspension systems
  • Bogie suspensions systems
  • Bus air suspension systems
  • Integrated Front Air Suspension and Steer Axle System for Bus
  • Air suspension systems
  • Parabolic springs
  • Lift axle suspension system

Tata AutoComp Katcon Exhaust Systems Limited

  • Catalytic converters
  • Tubes
  • Exhaust manifolds
  • DOC+DPF Euro5 underfloor shielded
  • DOC Euro4 and Euro5 Warm Up
  • Diesel particulate filters
  • Close coupled after-treatment
  • Manifold mounted converters
  • Agriculture SCR
  • Exhaust systems

TM Automotive Seating System Limited

  • Seating systems for passenger cars, SUV and commercial vehicles.

Air International TTR Thermal Systems

  • Battery Cooling HVAC
  • Complete Vehicle Thermal System
  • HVAC Unit
  • Control Panel
  • Compressor
  • Condenser
  • Evaporator
  • Heater Core


1995 Entered into a joint venture with Johnson Controls Holding Company Inc., USA for designing, developing, engineering, manufacturing in India and selling complete automotive seating for customers in India and abroad.
1997 Formed the following joint venture companies;
-Tata Toyo Radiator Pvt. Ltd. with Toyo Radiator Co., Ltd. (Currently T. RAD) and Mitsubishi Corp.
-Tata Yazaki AutoComp Pvt. Ltd. with Yazaki Corp. Japan.
-Tata Nifco Fasteners Pvt. Ltd. with Nifco Inc.
1997 Invested in JBM Tools Ltd. (jointly with Tata Industries Ltd.) with Mr. S.K. Arya, the promoter of JBM Tools Ltd.
The Company was renamed Automotive Stampings and Assemblies Ltd. on August 1, 2003.
2000 Automotive Composite Systems (International Pvt. Ltd.)* was incorporated as a joint venture with Owens Corning, USA.
This Company is currently a subsidiary of the Company and has been renamed TACOCL on March 5, 2010.
2000 Entered into a joint venture with Yutaka Giken, Japan and incorporated Tata Yutaka AutoComp Pvt. Ltd. for the business of complete solution in design development and manufacture of exhaust systems to the entire automotive industry.
2002 Entered into a joint venture with Knorr Bremse Far East Ltd., China for the manufacture of air braking systems in the company, Knorr Bremse Systems for Commercial Vehicles (India) Pvt. Ltd.
2004 Formed a joint venture with Faurecia Automotive Holdings, France and incorporated TACO Faurecia Design Center Pvt. Ltd. for providing design services for interior system components in automotive sector.
2004 Pursuant to a scheme of arrangement and amalgamation, Tata Auto Plastic Systems Ltd., a wholly subsidiary was amalgamated into the Company with effect from April 1, 2004.
2005 Acquired of Wundsch Weidinger GmbH, Germany.
2005 Entered into a joint venture with MobiApps Holdings Pvt. Ltd., Singapore and incorporated a company named TACO MobiApps Telematics Ltd. on February 25, 2005.
2005 Entered into a joint venture with Visteon International Holding Inc., USA and incorporated Tata Visteon Automotive Pvt. Ltd. and TACO Visteon Engineering Pvt. Ltd. both on June 21, 2005 for manufacturing and dealing in powertrain and lighting products and design and development of automotive components respectively.
2005 Entered into a joint venture with GS Yuasa International Ltd., Japan and incorporated Tata AutoComp GY Batteries Pvt. Ltd. on October 10, 2005.
2006 Entered a joint venture with Hendrickson International Corporation, USA and incorporated of TACO Hendrickson Suspensions Pvt. Ltd. on June 23, 2006.
2006 Gestamp Servicios, S.L. invested in Automotive Stampings and Assemblies Ltd.
2006 Sold the entire stake held by the Company in Tata Yutaka AutoComp Pvt. Ltd. to Yutaka Giken, Japan.
2006 Pursuant to the resolution dated October 26, 2006 passed by the member of Tata Nifco Fasteners Ltd. (TNFL), TNFL decided to voluntarily wind up under the provisions of the Companies Act on account of suspension of its business since 2006.
2008 One of the Company's joint ventures, TJCAL entered into a joint venture with ISRINGHAUSEN GmbH & Co. KG and incorporated ISRI TJC Pvt. Ltd. on October 16, 2008.
2009 Divested shareholding in Technical Stampings and Automotive Ltd.
2009 Divested stake in Taco Faurecia Design Center Pvt. Ltd.
2009 Acquired stake from IPM Inc. in Automotive Composite Systems (International) Ltd. currently known as TACOCL. TACOCL became a wholly owned subsidiary of the Company.
2010 Divested stake in Knorr Bremse Systems for Commercial Vehicles (India) Pvt. Ltd. to third party.
2010 Acquired entire stake of Automotive Stampings and Assemblies Ltd. from Gestamp Servicios, S.L.
2012 Divested entire stake in Tata Yazaki AutoComp Limited (TYA) to Yazaki Corporation.
2013 Divested entire stake in Tata Johnson Controls Automotive (TJCAL) to Johnson Controls.
Dec. 2013 Formed 50/50 joint venture with Air International Thermal Systems through its joint venture with T.RAD Co., Ltd., Tata Toyo Radiator.
Sep. 2014 Singed a agreement to form a 50/50 seating system manufacturing joint venture with Magna International Inc.
Oct. 2014 Agreed to establish a 50/50 joint venture with Mexico-based Katcon Global to produce exhaust systems.
Aug. 2016 Acquired TitanX, a leading engine and powertrain cooling solutions supplier
Jan. 2017 Completed acquisition of Titanx Engine Cooling
Mar. 2019 MoU with Tritium Pty Ltd.
Apr. 2019 Joint venture with Guoxuan Hi-Tech, China
Jun. 2019 Joint venture with SECO Seojin, Korea
Jan. 2020 Joint venture with Prestolite Electric Beijing, China for EV powertrains
Working with Tata Motors for battery pack assembly and motor assembly
Jun. 2020 MoU with Tellus Power Green to supply AC and DC Fast Chargers

Supplemental Information 1