NSK Ltd.
[日本精工]

公司概要

■URL

https://www.nsk.com.cn/

■总部所在地

Nissei Bldg., 1-6-3 Ohsaki, Shinagawa-Ku, Tokyo, 141-8560, Japan

业务内容

-日本精工由2个业务部门构成。汽车业务部门的销售额占比约为41% (2022年度(截至2023年3月))。

  • 工业机械业务:生产和销售一般工业轴承、滚珠丝杠和直线导轨等
  • 汽车业务:生产和销售面向汽车及汽车零部件制造商的轴承、转向系统及自动变速器(AT)零部件等

-轴承日本国内市场份额第一、全球市场份额第三(截至2022年3月31日,日本精工调查)。

资本构成

-4月起转移至东京证券交易所主要市场板块 (截至2023年3月31日)
名称或公司名 出资比例(%)
日本Master Trust信托银行株式会社 (信托账户) 14.98
Custody Bank of Japan, Ltd.(信托账户) 6.27
明治安田生命保险相互会社 5.29
富国生命保险相互会社 4.29
日本生命保险相互会社 4.22
株式会社瑞穗银行 3.49
日本Master Trust信托银行株式会社 (丰田汽车账户) 2.05
丰田汽车株式会社 1.91
日本精工客户持股会 1.90
日本精工员工持股会 1.66
合计 46.12



主要产品

电动化相关产品 (Electrification Products)
-无缝2速电动车桥概念 (Seamless 2-Speed e-Axle Concept)
-高效后轮转向执行器 (High Efficiency Rear Wheel Steering Actuator)
-电动液压制动系统用滚珠丝杠执行器 (Ball Screw Actuator for Electric-Hydraulic Brakes)
-线控转向系统用转向力反馈装置(FFA)/轮胎转向装置(RWA) (Steer-by-Wire Force Feedback Actuator (FFA) & Steer-by-Wire Road Wheel Actuator (RWA))
-抗电腐蚀推力滚针轴承 (Thrust Needle Bearing for Electrical Corrosion Resistan)
-电动汽车驱动电机用“高速旋转滚珠轴承Gen3”(Ultra High Speed Ball Bearings for EV Motors (Generation3))
-用于电动汽车的低摩擦HUB单元轴承 (Low Friction Hub Unit Bearings for EV)
-用于稀薄润滑环境的圆锥滚子轴承 (Tapered Roller Bearings for Lean Lubrication Conditions)
-电机用耐压高密封性轴承 (High Pressure Resistance Seal Performance Bearing for Motor)
-汽车用耐磨损轴承 (Anti fretting grease for Automotive bearings)
-下一代高耐热摩擦材料 (Next Generation High Energy Wet-Friction Material)

底盘相关产品 (Chassis products)
电动助力转向系统 (EPS: Electric power steerings)
-线控转向系统用转向力反馈装置(FFA)/轮胎转向装置(RWA)
-柱式电动助力转向系统 (Column type electric power steerings)
-小齿轮式电动助力转向系统 (Pinion type electric power steerings)

转向柱和中间轴 (Steering columns & Intermediate shafts)
-电动伸缩倾斜转向柱 (Electrical tilt and telescopic steerings columns)
-上枢轴倾斜和伸缩转向柱 (Upper pivot tilt and telescopic steering columns)
-上枢轴倾斜转向柱 (Upper pivot tilt steering columns)
-中枢轴倾斜伸缩转向柱 (Lower pivot tilt and telescopic steering columns)
-中枢轴倾斜式转向柱 (Lower pivot tilt steering columns)
-卡车倾斜伸缩式转向柱 (Tilt and Telescopic steering columns for trucks)
-滑动型中间轴 (Slidable intermediate shafts)
-可拆卸中间轴 (Collapsible intermediate shafts)
-缓冲节 (Noise isolating steering joints)
-双万向节 (Doubles cardan constant velocity joints)
-转向轴万向节 (Steering joints)

轮毂单元轴承 (Hub unit bearings)
-用于电动汽车的低摩擦HUB单元轴承 (Low friction hub unit bearings for EVs)
-内置环状被动传感器的轮毂轴承单元 (Hub unit bearings with annular passive sensors)
-内置列间传感器的轮毂单元 (Hub unit bearings with integral sensor located between the rows)
-内置多级磁场编码器的轮毂单元轴承 (Hub unit bearings with multipole magnetic encoders)
-内置端盖型主动传感器的轮毂单元轴承 (Hub unit bearings with end-cap type active sensors)
-双列角接触球轴承 (Double-row angular contact ball bearings)
-双列圆锥滚子轴承 (Double-row tapered roller bearings)
-带外轮法兰的双列角接触球轴承 (外轮旋转)
(Double-row angular contact ball bearings with outer mounting flange; HUBII for outer ring rotation type)
-带外轮法兰的双列角接触球轴承 (内轮旋转)
(Double-row angular contact ball bearings with outer mounting flange; HUBII for inner ring rotation type)
-带外轮法兰的圆锥滚子轴承 (内轮旋转)
(Double-row tapered roller bearings with outer mounting flange; HUBII for inner ring rotation type)
-带内外轮法兰的双列角接触球轴承 (驱动轮用)
(Double-row angular contact ball bearings with inner and outer mounting flange; HUBIII for driven wheels)
-带内外轮法兰的双列角接触球轴承 (从动轮用)
(Double-row angular contact ball bearings with inner and outer mounting flange; HUBIII for non-driven wheels)
-带内外轮法兰的双列角接触球轴承 (微型车用)
(Double-row angular contact ball bearings with inner and outer mounting flange; HUBIII for minivehicles)

制动系统 (Brake System)
-电动液压制动系统用滚珠丝杠执行器 (Ball Screw Actuator for Electric-Hydraulic Brakes)

发动机组件 (Engine parts)
-发动机挺杆滚柱从动件 (Roller followers for engine tappets)
-水泵轴承 (Water pump bearings)
-张紧器 / 托辊轴承 (Bearings for tensioners & idlers)
-压制摇臂组件 (Pressed rocker arm assemblies)
-凸轮轴轴颈用壳型滚针轴承 (Drawn-Cup needle roller bearings for camshaft journals)
-BWFH水泵轴承 (BWFH Type water pump bearings)
-涡轮增压器轴承 (Ball bearings for turbochargers)
-树脂滑轮 (Plastic pulleys for accessories & timing belts)
-同步带自动张紧器 (Auto-tensioners for timing belts)

电子元件 (Electrical Accessories)
交流发电机轴承 (Bearings for alternators)
‐交流发电机离合器皮带轮单元 (Clutch pulley units for alternators)
‐交流发电机轴承 (Bearings for alternators)

压缩机轴承 (Bearings for compressors)
‐电磁离合器用薄壁双列角接触球轴承 (Thin cross-section double row angular contact ball bearings for magnetic clutches)
‐用于压缩机的带集成座圈的推力滚针轴承 (Thrust needle roller bearings with integrated races for compressors)
‐压缩机用壳型滚针轴承 (Drawn-cup needle roller bearings for compressors)

电机轴承 (Bearings for motors)
‐ABS电机用滚针轴承 (Needle roller bearings for ABS motors)
-电动风扇电机用轴承 (Bearings for cooling fan motors)
-EPS电机用轴承 (Bearings for electric power steering motors)
-油门电机用轴承 (Bearings for throttle motors)
-EGR电机用轴承 (Bearings for EGR motors)

电动化相关
-电机用耐压高密封轴承/汽车用耐磨损轴承 (High pressure resistance seal performance bearing for motor)


传动系统相关产品 (Drivetrain products)
自动变速器 (Automatic transmissions)
-下一代高耐热摩擦材料 (Next generation high energy wet-friction material)
-用于稀薄润滑环境的圆锥滚子轴承 (Tapered roller bearings for lean lubrication conditions)
-摩擦板/隔离板 (Friction plates/separator plates)
-楔块式单向离合器 (One-way clutches; sprag type)
-弹性带/Maji band制动带 (Flex bands/Maji bands)
-离合器总成 (Friction clutch assemblies)
-液压锁离合器 (Hydraulic lockup clutches)
-滚子式单向离合器 (One-way clutches; roller type)
-动力总成用推力滚针轴承 (Thrust needle roller bearings for powertrains)
-变矩器用推力滚针轴承 (Thrust needle roller bearings for torque converters)
-行星齿轮用保持架&滚针总成及轴 (Cage & roller assemblies and shaft for planetary gears)
-动力总成用壳型滚针轴承 (Drawn-cup needle roller bearings for powertrains)
-换挡连杆机构滚针轴承 (Drawn-cup needle roller bearings for shift linkages)
-电磁阀用线性轴承 (Linear bearings for solenoid valves)
-高耐久双列角接触球轴承 (Long life double row angular contact ball bearings)
-高耐久双列圆锥滚子轴承 (Long life double row tapered roller bearings)
-带外轮固定法兰的高耐久圆锥滚子轴承 (Long life tapered roller bearings with outer mounting flange)
-带外轮环花键的高耐久双列轴承 (Long life double row bearing with outer ring splines)
-带PA46塑料保持器的圆锥滚子轴承 (Cylindrical roller bearings with PA46 plastic cages)
-薄型圆锥滚子轴承 (Thin-walled tapered roller bearings)

手动变速器 (Manual transmission)
-高耐久密封清洁球轴承 (Long life sealed-clean ball bearings)
-高推力负荷容量圆柱滚子轴承 (High thrust capacity cylindrical roller bearings)
-QAT圆锥滚子轴承 (Quick-assembly tapered (QAT) roller bearings)
-壳型线性滚针轴承 (Drawn-cup linear ball bearings)
-塑料保持架&滚针 (Needle roller & plastic cage radial assemblies)
-分离型保持架&滚针 (Split needle roller & plastic cage radial assemblies)
-轻量低成本TKZ型离合器分离轴承 (Light weight and low costs TKZ type clutch release bearings)
-同步环用钢锥 (Synchronizer steel cones)

环形CVT powertros单元 (Toroidal CVT powertros units)

差速器齿轮及传动轴 (Differential gears and propeller shafts)
-TF系列圆锥滚子轴承 (TF (Though) series tapered roller bearings)
-低扭矩圆锥滚子轴承 (Low torque tapered roller bearings)
-高耐久小齿轮轴用圆柱滚子轴承 (Long life cylindrical roller bearings for pinion shaft pilot support)
-传动轴万向节用耐久滚针轴承 (Long life needle roller bearings for universal joints)
-高耐久传动轴中心轴承 (Long life center support bearings)
-高耐久4WD联轴轴承 (Long life coupling support bearings for 4WD vehicles)

公司历程

1916年11月 继承日本精工合资公司(1914年成立)的所有业务,以注册资本35万日元在东京都品川区成立日本精工股份公司。
1934年03月 在东京都大田区新建钢球工厂,次年3月在钢球工厂内另建球轴承工厂,改名为多摩川工厂。
1937年11月 在神奈川县藤泽市新建藤泽工厂。
1953年11月 在滋贺县大津市成立西日本精工股份公司。
1960年06月 在群马县前桥市成立北日本精工股份公司,车载转向系统工厂开始运作。
1962年12月 在美国新泽西州成立JAMCO公司。
1963年01月 在群马县高崎市成立NSK Trinton Ltd.。
1963年10月 在西德成立德国NSK公司。
1964年08月 与美国博格华纳合资成立NSK BorgWarner Inc.。
1966年05月 吸收合并西日本精工股份公司,改为大津工厂。
1967年11月 吸收合并北日本精工股份公司,成为前桥工厂。
1969年03月 藤泽工厂的钢球工厂独立。与天辻钢球制作所合作成立新日本钢球股份公司。
1969年09月 大津工厂的分工厂独立,成为石头工厂。
1999年02月 与NSK轴承 (泰国) 在泰国曼谷郊外成立合资公司NSK安全技术 (泰国)。
1999年07月 关闭多摩川工厂。
1999年08月 物流部门独立,在东京都品川区设立NSK Logistics Co., Ltd.。
1999年12月 通过股份转让,在东京都品川区设立NSK销售股份公司。
2000年02月 为了加强转向业务,使Nastec Ltd. (美国) 成为NSK Americas Ltd.的全资子公司,使Nastec Europe Ltd. (英国) 成为NSK-RHP Europe Ltd.的全资子公司。
2001年04月 车载半环形无级变速器获得日本机械学会奖。
2001年07月 福岛工厂独立,在东京都品川区设立NSK福岛股份公司。
2002年03月 在泰国成立NSK Bearing Manufacturing (泰国)。
2002年10月 精密机器相关业务部独立,在东京都品川区成立NSK Precision Co., Ltd.。
2003年07月 NSK Torrington成为子公司,改名为NSK Needle Bearing。
2004年05月 在中国江苏省成立常熟恩斯克轴承有限公司 (Changshu NSK Needle Bearing Co. Ltd.)。
2006年03月 天辻钢球制作所成为全资子公司。
2007年07月 中国江苏省的圆锥滚子轴承生产公司、苏州恩斯克轴承有限公司成为全资子公司。
2008年01月 在中国成立独立研发法人。
2008年01月 在中国江苏省成立轮毂锻造公司、恩斯克八木精密锻造 (张家港) 有限公司。
2008年02月 与ABC公司合资,在印度成立汽车轴承生产公司NSK-ABC Bearings Ltd.,开始生产。
2008年03月 与浙江万达汽车零部件有限公司 (万达) 合资,在中国杭州市成立杭州恩斯克万达电动转向系统有限公司。
2008年05月 与Rane的合资公司(Rane NSK Steering Systems Ltd.)下的工厂 (印度Haryana州) 开始生产动力转向系统。
2009年10月 中国江苏省昆山市的恩斯克 (中国) 研究开发有限公司的新办公楼竣工。
恩斯克投资有限公司也从上海市搬迁至昆山。
2010年07月 吸收合并全资子公司NSK福岛股份公司。
2010年08月 在中国辽宁省沈阳市成立工业机械轴承生产公司、沈阳恩斯克有限公司[Shenyang NSK Co., Ltd.]。
2010年09月 在东京都品川区成立股份公司东芝、车载转向系统开发公司和股份公司ADTeck。
2010年11月 取得与印度莱恩的合资公司——Rane NSK Steering Systems Ltd.半数以上的股份。
2011年07月 在中国安徽省合肥市成立汽车轴承及工业轴承的生产公司-合肥恩斯克有限公司[NSK Hefei Co., Ltd.]。
2011年07月 系统产品业务部单独成立公司,在东京品川区成立NSK技术株式会社。
2012年07月 日本精工株式会社吸收合并NSK Precision。
2013年03月 取得中国浙江省宁波市的轴承配套厂摩士集团股份有限公司的股份,成为权益法适用公司。
2013年04月 在墨西哥瓜纳华托州Silao市成立生产汽车轴承的公司NSK Bearing Manufacturing Mexico S.A. de C.V.。
2015年06月 NSK Technology Co., Ltd.的股份让渡给神奈川县横滨市的株式会社V-Technology。
2016年07月 吸收合并NSK Needle Bearing Co., Ltd.。
2017年02月 在韩国天安市设立天安工厂。
2018年12月 群马县高崎市的榛名工厂3号楼竣工。
2021年03月 收购英国Spectris公司的状态监测系统业务。

补充 1