According to multiple press releases dated December 16, XPeng was granted a license for road testing of Level 3 autonomous driving in Guangzhou and launched such testing in a regular manner. The license is mainly for testing of conditional autonomous driving on local intelligent connected vehicle testing expressways

Reported on December 15, 2025, EP Manufacturing Bhd (EPMB) revealed the XPeng models to be assembled in Malaysia: the G6 SUV, X9 MPV, and the newly launched X9 PowerX REEV at Melaka plant. Its wholly owned subsidiary, PEPS-JV (Melaka) Sdn Bhd (PJVM), signed a Framework Assembly Agreement (FAA) and Vehicle Assembly Ag

Announced on December 15, 2025, XPeng Motors plans to launch its third overseas localized manufacturing initiative, selecting Malaysia as the next base to deepen its footprint in Southeast Asia.
The company recently formalized a partnership with Malaysia’s EPMB Group to move forward with the project, marking XPeng’s

According to multiple press releases dated December 10, the ID. UNYX 07 midsize battery electric sedan, the first cooperative vehicle model between VW Group and XPeng, will roll off the production line at VW Anhui on December 31.
Built on VW Group’s CEA (China Electronic Architecture) architecture for the Chinese mar

On November 20, XPeng launched the X9 REEV (range-extended electric vehicle) MPV, its first super REEV model. The model is available in two variants priced at CNY 309,800 and CNY 329,800, respectively.
The X9 REEV measures 5,316mm long, 1,988mm wide, and 1,785mm high, with a wheelbase of 3,160mm.
The X9 REEV features

On November 6, XPeng started accepting pre-orders for the X9 REEV (range-extended electric vehicle) MPV, its first super REEV model. The model is available in two variants, with respective pre-order prices of CNY 350,000 and CNY 370,000.
The X9 REEV adopts the ONEBOX luxury wide-bodied starship-styled exterior design

On November 5, XPeng released the VLA (Vision-Language-Action) 2.0 large model, its first mass-produced physical world large model, at the 2025 XPeng AI Day. It predicts future decision-making scenarios based on an understanding of the physical world and can be applied to automobiles, Robotaxis, robots, and flying ca

On November 5, XPeng announced the 2026 launch of three Robotaxi models and their trial operations, as well as the rollout of the new Robo intelligent driving solution.
The XPeng Robotaxi, China’s first full-stack, in-house developed production Robotaxi model, is designed for Level 4 intelligent driving. It is equipp

On November 5, XPeng secured a nomination from VW Group for its Turing AI chip. The two companies will launch their sixth cooperation following electronic and electrical architectures, ultra-fast charging networks, chips, and intelligent driving systems.
Furthermore, the XPeng VLA (Vision-Language-Action) 2.0 large m

On November 3, the trial production and roll-off of the first Land Aircraft Carrier modular flying car was completed at an XPeng AeroHT plant. This marks the completion of the world’s first mass production line for flying cars.
The very first Land Aircraft Carrier will be put into test flights for further verificatio

On October 30, multiple sources reported that Shiran Volt, an import division of Shiran Motor Company, will introduce Xpeng cars in Iran. It will launch the Xpeng G6 in Iran. XPeng G6 is a battery electric mid-size crossover SUV. It has a range of 625 km. The car has a wheelbase of 2,890 mm.
Based on multiple sources

On October 23, XPeng announced the upcoming launch of the X9 REEV (range-extended electric vehicle) MPV, its first super REEV model.
The X9 REEV adopts an elegant, luxury exterior design, with a coupe-styled intelligent active grille shutter for both lower drag co-efficient and better heat dissipation. In the rear ar

Announced on October 18, 2025, XPeng officially entered Cambodia, naming NSPENG AUTOMOBILE IMPORT AND EXPORT Co., Ltd. as its local partner responsible for managing sales, service, and brand operations.
Formed through a joint venture between Guangzhou Nanling Auto Group and SDB Auto Group of Cambodia, NSPENG combines

On October 13, multiple sources reported that XPeng has started exports of the Mona M03 electric sedan to the Middle East and North Africa (MENA) region. The vehicle contributed to over 40% of XPeng Motors’ total deliveries from January to August in 2025.
Based on multiple sources

Reported on October 1, 2025, Bermaz Auto Group CEO confirmed that the company has completed feasibility studies for a CKD project of XPeng vehicles and is now working with local partners to implement it. 
Local assembly is expected to begin in the second half of 2026, although the production site has yet to be finali

On September 25, XPeng announced the recent signing of an agreement on post-quantum security technology with Alibaba Cloud.
Under the agreement, Alibaba Cloud will serve as an XPeng partner for security algorithms. Based on post-quantum security algorithm projects, the two companies will conduct joint R&D of and expa

As traditional OEMs reduce their reliance on outsourcing, Chinese automakers are stepping in.
The IAA Mobility Show in Munich highlighted a clear shift in the European auto industry; contract manufacturing, used primarily for overflow from European OEMs, is now being redefined as Chinese brands seek to establish a lo

Announced on September 23, 2025, Charge+ has teamed up with XPENG Motors to roll out a network of high-powered supercharging stations across Southeast Asia.
The partnership plans at least 20 DC supercharging hubs in Singapore, Malaysia, Thailand, and Indonesia, offering up to 480kW DC power. XPENG EVs with 5C Superch

According to multiple press releases dated September 15, Xiaopeng HE, chairman and CEO of XPeng, recently talked about “AI investment and profit channels”.
Mr. HE emphasized that XPeng is not only an automaker, but also an AI company. He predicted that automakers’ future annual R&D investment will reach CNY 50 billio

On September 15, Magna announced that XPENG, a Chinese smart electric vehicle manufacturer, has selected Magna to assemble two new models for the European market.
The serial production is scheduled to start in Q3 2025, marking Magna’s first full vehicle assembly with a Chinese OEM at its Graz, Austria facility.
Base