On March 23, FORVIA HELLA announced that it has developed and produced the world’s first Front Phygital Shields for the new all-electric BMW iX3.  Front Phygital Shields are designed as a scalable platform that integrates lighting functionality, decorative elements for vehicle styling, and sensor technology. It reduc

On February 3, Gabriel India Limited, in an investor update, announced that Inalfa Gabriel Sunroof Systems Private Limited (IGSS) has won new business with Hyundai for 3 model variants. The total volume expected is 130,000, with an annual turnover of roughly around INR 1.2 billion. The start of production is expected

Autoneum Holding Ltd. (Autoneum) has introduced the Ultra-Silent Frunk, a fully polyester-based front trunk solution for battery electric vehicles (BEVs).
The Ultra-Silent Frunk achieves weight reduction exceeding 50% while offering enhanced acoustic and thermal insulation. Using up to 70% recycled material, it can r

Several South Korean media sources reported that South Korea’s TS Automotive Co., Ltd. will expand its plant in Gyeongju, Gyeongsangbuk-do. It plans to invest KRW 35.2 billion (JPY 3.87 billion) to build a production line for front-end panels, rear under bodies, and other parts by September 2028. These automotive bod

Autoneum Holding Ltd. (Autoneum) has supplied lightweight, fully recyclable polyester-based interior and exterior components for the Polestar 5 electric grand tourer, which was revealed at IAA Mobility 2025 and is available in 24 markets.
Developed over five years in close collaboration with Polestar, Autoneum’s mono

OPmobility SE (formerly Plastic Omnium) and Yanfeng Group, a subsidiary of Huayou, have strengthened their joint venture YFPO, China’s leading manufacturer of exterior body parts (bumpers and tailgates), by expanding into module assembly activities and signature and decorative lighting solutions.
The integration of t

On October 26, multiple sources reported that Delemar Industrial Group is investing EGP 5 billion to establish advanced industrial complexes. For the automotive sector, it will establish a production line for automotive glass for passenger cars, trucks, and minibuses. It is targeting a production volume of 750,000 ca

On October 21, Treves Group, in a social media post, announced that it is building a new production line for the wheel arch liners for two SEAT vehicles. This will be the first time this type of part has been produced at its Trety plant in Spain. It will also manufacture other components on this line for the new 100%

OPmobility SE (formerly Plastic Omnium) has signed a global cooperation letter of intent with Chery Automobiles Co. Ltd., a leading Chinese automaker, to support Chery’s international expansion by leveraging OPmobility’s global R&D and production footprint.
The long-term partnership aligns with OPmobility’s geographi

On September 18, Flex-N-Gate announced that it has designed and industrialized the main exterior components for Mitsubishi’s new generation SUV, the Eclipse Cross. It includes front and rear bumpers, rear panel, technical front end, and spoiler. 
These components will be produced at its French sites in Marles-les-Min

On September 1, HRC announced that it will make its debut at IAA Mobility 2025 and present a series of advanced composite solutions engineered for structural performance, lightweight efficiency, and sustainable innovation. The exhibition spotlights three major themes — SUSTAINABLE Ecosystem Solutions, SMART Innovatio

On August 26, Flex-N-Gate announced that Stellantis has introduced a completely redesigned front end in the recently launched Peugeot 308 sedan and SW feature. Flex-N-Gate supported Stellantis in the development and industrialisation of the new front bumper for the Peugeot 308. The parts will be produced at its Burnh

On August 21, the federal Industrial Development Fund (IDF) announced that Prizma has started deliveries of exterior and interior car mirrors for Lada Iskra. For this purpose, the enterprise in Dimitrovgrad, Ulyanovsk region, has modernized its production.
It has integrated a high-performance laser cutting section in

Several South Korean media sources reported that a South Korean automotive body parts manufacturer, DH, will build a new plant in Pyeongtaek-si, Gyeonggi-do, investing KRW 80 billion (JPY 8.8 billion). The company aims to start construction in the first half of 2026 and operation in the latter half of 2027. DH has he

Several South Korean media sources reported that a South Korean company, Taeyoung Tech Co., Ltd., will build a new plant in Gyeongju, Gyeongsangbuk-do, investing KRW 15.1 billion (JPY 1.66 billion). The construction work is scheduled to begin in August 2025 and continue until June 2026, with the new plant producing d

On July 1, Flex-N-Gate announced that it has developed and industrialized the main exterior components for the new Nissan Micra as part of its collaboration with Renault. These components include the front and rear bumpers, wheel arches, rocker panels, door protectors, headlamp and rear lamp embellishments, and the s

On June 18, KIRCHHOFF Automotive, in a newsletter, announced that it is supplying formed parts and welded assemblies, including front and rear side members, front panels, and body forming parts for the Ford Puma and Ford Transit Courier BEV programs. These components are produced across the Craiova (Piteşti) plant in

On May 21, Gabriel India, in an investor update, announced that its joint venture Inalfa Gabriel Sunroof Systems is planning to set up a second production line for sunroofs at its Chennai plant. It will have a capacity of 200,000 units. It will be operational by the second half of 2025. 
Based on Gabriel India invest

On April 25, Tata Technologies announced that it is working with a global automotive Tier 1 supplier to develop advanced software for optimizing energy use across multiple battery packs in commercial vehicles. It also leads the design and development of interior and exterior trims for an Asian automotive OEM for its