Röchling SE & Co. KG.

公司概要

■URL

https://www.roechling.com/

■总部所在地

Richard-Wagner-Strasse 9, 68165 Mannheim, Germany

业务内容

-这家家族企业专门为包括汽车行业在内的多个行业开发和制造工程塑料系统和组件。

-由以下三个业务部门构成:

  • 工业部门 : 开发和供应用于半成品和机械加工零部件的热塑性树脂和复合材料。
  • 汽车部门 : 在电池解决方案、空气动力学、推进和结构轻量化领域提供树脂解决方案。
  • 医疗部门: 为医疗保健行业开发产品、服务和平台解决方案。

-2022年度(截至2022年12月)汽车部门销售额同比增长12.7%达1,150百万欧元。

-2022年,汽车部门投资了3,730万欧元,主要用于有形固定资产、新客户项目和电池解决方案专业技术的战略开发。其中包括必要的测试和制造专业技术开发,以及准备有源充电门等新产品。

资本构成

-Roechling持股的家族企业。

主要产品

电池解决方案 (Battery solutions)
-电池盒盖 (Battery housings and covers)
-电池框架 (Cell frames)
-绝缘片 (Insulating sheets)
-电芯连接系统 (Cell contact systems)
-电池包热管理 (Battery pack thermal management)
-电池横向构件 (Battery cross members)
-电池保护(Battery protection)
-电池外壳(Battery enclosures)

结构轻量化零部件(Structural lightweight parts)
-电池盖(Battery covers)
-电池外壳(Battery enclosures)
-管道/后备厢/前备箱(Tubs/Trunks/Frunks)
-前端框架(Front end carrier)
-结构轻质、高强度材料(Structural lightweight, high-strength material)
-底部防护板(Intrusion protection plate)

非接触型充电系统(Inductive charging systems)

燃料电池部件(Fuel cell components)
-树脂制双极板(Bipolar plastic sheets)
-离子发生器(Ion-exchange cartridges)
-滤材(Filter elements)
-脱气瓶(Degas bottles)

空气动力学(Aerodynamics)
-主动式空气卷帘(Active Air Blinds)
-主动式空气坝(Active Air Dam)
-主动和被动式格栅模块(Active and passive grille shutter modules)
-主动前轮挡板(Active Speed Lips)
-风管和密封件(Air Ducts and Sealings)
-车身底板(Underbody panels)
-轮拱衬垫(Wheel Arch Liners)

 
有源充电门(Active charging gate)

先进的主动清洁系统(Advanced Active Cleaning System (AACS))

过滤系统(Filter systems)
-带无纺布过滤器的进气系统 (Air intake systems with nonwoven filters)
-纸过滤器 (Paper filters)
-气流优化进气模块 (Air intake modules with optimized air flow)
-高性能锐切进气模块 (Air intake module with sharp-cut raw air stroke for higher performance)

风管(Air tubes)
-带谐振器的洁净风管 (Clean air tubes with resonator)
-中冷器导管 - 前部 (Pre-inter cooler ducts)
-中冷器柔性导管 - 后部 (Post-intercooler flexible ducts)

进气歧管(Intake manifolds)
-水冷式中冷器集成进气歧管 (Intake manifolds with integrated water to air intercooler)
-进气歧管(长度可调) (Intake manifolds with variable length adjustment)
-高性能V10发动机进气歧管 (Intake manifolds for high performance V10 engine)
-双增压汽油机进气歧管(Intake manifolds for twin charged gasoline engine)

挡风玻璃罩盖和排水口(indshield cowl covers and water drains)
-带软密封的挡风玻璃罩 (Windshield cowls with soft seals)
-带模制格栅的挡风玻璃罩 (Windshield cowls with molded grills)
-带金属网格的挡风玻璃罩 (Windshield cowls with metal grids)

空调风管(Air ducts for climatization)
-吹塑风管 (Blow molded air ducts)
-空气分配系统 (Air distribution systems)
-吸音风道 (Noise absorbing air ducts)

脱气瓶(Degas bottles)
-带液位传感器的脱气瓶 (Degas bottles with level sensors)
-防腐蚀用多室瓶 (Multi-chamber bottles for anti-corrosion)

冷却水管(Cooling-water pipes)

挡风玻璃清洗瓶(Windshield washer bottles)
-泵/加热器一体式清洗瓶 (Washer bottles with pumps and integrated heating)
-带加注口塞的清洗瓶 (Washer bottles with filler plugs)

SCR储罐系统(SCR tank systems)
-带有集成填料和排气管的SCR储罐 (SCR tanks with filling and degas pipe)
-尿素水用二级储罐 (Secondary tanks for SCR fluid)
-SCR储罐系统 (Complete SCR tank systems)
 
发动机隔热件(Thermal engine encapsulation)
-发动机侧护罩、下护罩 (Engine sideshields and undershields)
-由轻质增强热塑性树脂制成的发动机隔热罩部件 (Engine encapsulation made from low-weight reinforced thermoplastic insulation materials)

设计盖板(Design covers)
-带泡沫吸音器的隔音罩 (Acoustic covers with foam absorber)

隔断墙(Partition walls)
-具有降噪功能的隔断墙 (Partition walls with noise dampening characteristics)
-具有降噪特性的扩展仪表板 (Extension dash panels with noise dampening characteristics)

车底防护板(Body undershields)
-车底防护板 (Complete body undershielding)
-后桥盖 (Rear axle covers)
-采用轻质高强度材料Stratura的车身底部 (Integrated underbody using lightweight, high-strength, Stratura material)

轮拱衬垫(Wheel arch liners)
-前轮挡板的轮拱衬垫 (Wheel arch liners with aerodynamic speed lips)
-复合纤维轮拱衬垫 (Wheel arch liners made from different textile materials)

车门和侧板(Door and side panels)

内饰(Interior trim)
-车门盖 (Door capping)
-踏板 (Tread plates)
-敞篷车后面板 (Back panels for convertible)
-下柱板 (Lower pillar panels)
-带把手的立柱装饰 (Pillar trim with grab handles)
-C柱饰板 (C-pillar trim)

托盘、集水槽和其他结构件(Trays, sumps, and other structural parts)
-备胎托盘 (Spare wheel trays)
-多功能托盘 (Multifunctional trays)
-电池托盘 (Battery trays)
-应急轮井 (Emergency wheel well)

后备厢饰件(Trunk trim)
-后备厢盖饰板 (Trunk lid trim)
-侧壁/立柱装饰 (Side walls/Pillar trim)
-手套箱 (Glove boxes)
-弹簧支柱盖 (Spring strut covers)
-尾门装饰 (Tailgate trim)

公司历程

1956年 Willi Seeber在Bozen地区的Rentsch成立Seeber S.r.L.。
1986年 Rochling收购Seeber S.r.L.。
1992/93年 Rochling收购BASF/Elastogran Kunststofftechnik的Worms工厂和Kast集团。
1997/98年 Seeber AG & Co. KG在德国Mannheim成立。
2000年 在巴西Diadema成立合资公司Seeber Fastplas。
在意大利Trento新建生产工厂。
在意大利Torino新成立工程办事处及生产基地。
2001年 成立发动机舱、车身底板、内饰方面的三个工程中心。
在中国长春市成立合资公司。
在西班牙Araia成立合资公司。
2003年 在德国Worms和Hattorf分别建造工厂。
2004年 在中国长春建造工厂。
2005年 再次在中国长春建造工厂。
Seeber Belgium成为公司的全资子公司。
2014年 在德国Wackersdorf设立新工厂。
2014年 中国昆山的新工厂投入使用。
2016年 德国Worms的新技术中心奠基。
2016年 在日本设立合资公司。
2017年9月 在西班牙开设第二家工厂。
投资300万欧元在中国沈阳新建工厂。
2019年5月 签署协议,将德国Wolfsburg-Hattorf工厂出售给河西工业
2019年7月 在斯洛伐克的Kocovce建设新工厂。
2020年5月 在Waldachtal成立Roechling Direct Manufacturing Center (RDMC)。

补充 1