BYD Han L AWD 2025MY (China)

The new BYD Han L comes with 801 kW and shows latest BYD blade cell battery technology with 10C charging capability and high speed motor.

Key Features

Battery optimized for fast charging
- 1000 V voltage level with ~300 latest generation BYD short blade cells
- Peak 10C charging capability
- Dual cooling plates at bottom and top
Dual gun charging allows for up to 1,000 kW charging power
Highly integrated rear e-drive
- Besides motor, inverter and gearbox different power electronics and control functions are integrated in the 12-in-1 EDU
- High-speed power-dense electric motor
  - 580 kW peak power
  - 30,511 rpm achieved by combination of various new technologies
  - Power density of 16.4 kW/kg
- Power electronics
  - 1,500 V in-house developed and produced SiC MOSFET power module

Benchmarking Report Overview

The following reports are available:
Please note that this report is not offered as a PDF file, but rather through the purchase of access rights to FEV’s professional benchmarking database.

M3.11 – Design Benchmark HV Battery

Han L is equipped with around 300 of BYD’s latest-generation short blade cells, achieving a 1,000 volt electrical architecture, and uses cooling plates arranged above and below the cells for thermal management.
M3.121 – Design Benchmark Rear e-Axle (12-in-1)

Rear e-Axle is configured as a 12-in-1 EDU, integrating the motor, inverter, and gearbox along with various power electronics and control functions.
M3.122 – Design Benchmark Front e-Axle (including inverter)

This is an on-demand report, for which data is compiled after the order is received; therefore, the delivery time will be longer than usual.
Please contact us for delivery details.
M3.21 – Cost Benchmark HV Battery

(sold as a set with M3.11 – Design Benchmark HV Battery)
M3.221 – Cost Benchmark Rear e-Axle (12-in-1)

This is an on-demand report and sold as a set with M3.121 – Design Benchmark Rear e-Axle (12-in-1).
M3.222 – Cost Benchmark Front e-Axle (including inverter)

This is an on-demand report and sold as a set with M3.122 – Design Benchmark Front e-Axle (including inverter).

For further details including content and price, please contact:

MarkLines Co., Ltd., Consulting Services Department
Person in charge: Mr. Usuba
TEL：(03) 4241-3906
FAX：(03) 4241-3900
e-mail：benchmarkdata@marklines.com

CONTENTS

SERVICE

About the Information Platform

BYD Han L AWD 2025MY (China)

Key Features

Benchmarking Report Overview

For further details including content and price, please contact:

MarkLines Customer Support