Analysis Report: Instrument Panel (Japanese Market)

2019/07/02

List of Suppliers

Toyoda Gosei Co., Ltd. Marelli (Formerly Calsonic Kansei) INOAC Corporation Hitachi Chemical Yachiyo Kogyo
Kojima Industries Corporation DaikyoNishikawa Nihon Plast Co., Ltd. Moriroku Technology Company, Ltd. Sanko Gosei Ltd.
Suiryo Plastics Shigeru Co., Ltd. Japan Plastics Technologies Co., Ltd. (former Japan IAC) Sankei Sekisui Techno Molding Co., Ltd.

Refer to the European & U.S. markets report



Ⅰ. Introduction

The instrument panel is one of the major interior parts of an automobile, along with the seats and headliner. Instrument panels are important not only in terms of functionality, operability, and safety, but also serves as a key component that influences the design of the vehicle interior. Because of this, it is often manufactured in-house by automakers and vehicle body suppliers, with approximately 40% made in-house by Japanese OEMs for the domestic market. (Based on the FY 2018 MarkLines survey) When the instrument panel is outsourced, there needs to be a strong working relationship between the supplier and the automaker from the early stages of development. As a result, this is one of the products lines that may be excluded with regards to the globalization of supply bases, as the instrument panel is often internally sourced to Japanese OEM group-affiliated companies.

The front cockpit section of the instrument panel is a component typically made of plastic materials. However, the area surrounding the IP is made up of various plastic components such as the console, glove box, meters and meter hood covers, ventilators (louvers), car navigation and audio systems, switches, and the passenger-side airbag. A recent trend, particularly in the U.S., is for the cockpit module to be assembled by a supplier located near the OEM plant and then shipped to the OEM at a later phase in the vehicle production process. In the Japanese market, Calsonic Kansei, a supplier of instrument panels, is often used as representative example of a supplier of  cockpit modules.

The cluster meter is considered a functional component that is incorporated into the instrument panel. As the name "cluster" implies, it has conventionally been a collection of independently integrated mechanical instruments such as the speedometer, tachometer, fuel gauge, and thermometer. However, in recent years, there has been an increase in instrument panels that include, for example, LED and organic EL (Organic Light-Emitting Diode) displays that enable the display of "meters". In addition, there are also vehicle models being released today in which the cluster meter has been eliminated entirely, such as the Tesla Model 3 mentioned below, and where the meter functions have been integrated into the center display. The cluster meter is one automotive component that is increasingly being incorporated into the instrument panel.

The instrument panel installed in most models in the Japanese market separately incorporates parts such as the cluster meter, air conditioning ventilators (louvers) and switches as described above. However, in recent years the trend seems to be, especially with Western OEMs, to incorporate as many functions as possible with the touchscreen display monitors of in-vehicle information devices. This design trend is quite noticeable at Telsa in the U.S. In particular, the aforementioned Model 3 is a Telsa entry level model, where not only the switches but also the cluster meter have been eliminated from the instrument panel, and where the associated functions have been integrated with the 15-inch HMI (Human Machine Interface) display monitor mounted at the center area of the instrument panel. Furthermore, the design of the interior of the Model 3 involves a couple of long, horizontal slits (plenums) provided on the instrument panel substrate to distribute the horizontal air flow, eliminating the need for air conditioning louvers (outlets) on the surface of the instrument panel. In other words, the upper part of the Model 3 cockpit has a very simple design consisting of only a steering column, steering wheel, and a touchscreen display mounted at the center of the instrument panel. As a result, it is believed that the Model 3 will have a ripple effect on the design philosophy used for instrument panels going forward.

Supplier shares of instrument panel for the Japanese market are shown below. (Based on 2018 MarkLines data on the production volumes of finished vehicles)

The top supplier, Toyoda Gosei, supplies product mainly to Toyota and Daihatsu. In second and third place, respectively, are DaikyoNishikawa and Shigeru Co., Ltd. who have a significant share of the Japanese market, supplying product to Mazda and Subaru, respectively. Conversely, the supply chain in Japan below 4th place is fragmented, with no single supplier having any significant share of any OEM’s business. In addition, the instrument panel market share percentages cited below do not include products such as consoles, glove boxes, and meters.

2018 MarkLines survey: Market share of instrument panel suppliers in Japan

  1. Toyoda Gosei: 12%
  2. DaiklyoNishikawa: 11%
  3. Shigeru Co., Ltd.: 9%
  4. Japan Plastics Technologies (JP Tech): 6%
  5. Marelli (Formerly Calsonic Kansei): 5%
  6. Suiryo Plastics: 4%
  7. INOAC Corporation: 4%
  8. Hitachi Chemical: 3%

Other: 4%
Total OEM In-house: 42%

Next, the market share of suppliers in Japan for meters, which are the main functional components integrated with the instrument panel, is shown below. (Calculated by MarkLines using 2018 data on the production volumes of finished vehicles)

There are five Japanese-affiliated suppliers of meters as listed below (NS West is a 100% subsidiary of Nippon Seiki, so there are actually four companies), but one supplier, Continental of Germany, is delivering product for several models in production in the Japanese market. The top supplier of meters is Denso of the Toyota Group (Toyota is Denso’s largest shareholder at 24.23%) and supplies product mainly to Toyota and Suzuki. The next point to be made regarding meter suppliers, is that if the market share of Nippon Seiki of the Honda Group (Honda is Nippon Seiki’s larget shareholder at 6.55%) and that of its subsidiary, NS West, were combined, then the combined market share would rival that of Denso’s. The reason for Nippon Seiki’s high market share is because, together with NS West, it supplies product to all eight Japanese OEMs (excluding the 4 heavy-duty commercial vehicle manufacturers). Among the suppliers of instrument panel and cockpit modules to customers primarily for the Japanese market, Calsonic Kansei is the only supplier that also manufactures meters.

2018 MarkLines survey: Market share of meter suppliers in Japan

  1. Denso 33%
  2. Nippon Seiki 25%
  3. Yazaki 22%
  4. Marelli (Formerly Calsonic Kansei) 11%
  5. NS West 9%

This report covers the instrument panel itself as well as its key components such as the center console, console box, glove box, and meters. As far as the installation status is concerned, this report summarizes the status on a model-by-model basis, and includes as much information as possible on cockpit modules and instrument panels, including assemblies, as well as the associated meters.

For reference, the installation status of OEM in-house manufactured parts are described in the table in Section V, but as this report is intended to focus on suppliers, little additional explanation is offered with regards to in-house production.



Ⅱ. Overview of major instrument panel suppliers (excluding meter suppliers)

Toyoda Gosei

  • It is one of the major parts suppliers of the Toyota Group and headquartered in Kiyosu City, Aichi Prefecture.
  • The business composition of the company is roughly divided into auto parts, LED products, and special-purpose products, but the sales composition of the company shows that auto parts are prominent at 98% (the fiscal year ending March 2018), making it essentially an auto parts company.
  • Among the automotive parts the company manufactures are interior and exterior parts such as the instrument panel, airbag related parts, and functional parts as such as fuel tanks, and weather stripping, with two-thirds of the total company revenue coming from the sales of airbags and interior and exterior related parts. For example, the sales of interior and exterior parts accounted for 38% of total company revenue, up 13% from the previous year. (for the fiscal period ending March 2018)
  • The company is the largest supplier of instrument panel in the Japanese market, if one excludes those instrument panels manufactured in-house by several OEM.
  • The company manufactures instrument panel related parts such as instrument panels, console boxes, center clusters, cup holders, and glove boxes.
  • The company functions as Toyota’s global systems supplier, with about a 40% share of its instrument panels supplied to Daihatsu, and 15% to Toyota, which makes it the market leader because of the high production volumes of Toyota.
  • In recent years, Toyoda Gosei has been focusing on strengthening its power semiconductor and airbag business by using the GaN-based crystallization technology adopted for LED products, and doesn’t appear to be active in any other area involving interior parts, including the instrument panel, other than the development of modularized sensors as described later in this report.
  • The company is targeting to introduce next generation cockpit modules to market by around 2020 by working with suppliers that provide the various sensors required for advanced driver-assistance systems (ADAS), autonomous driving, and electrification.

 

DaikyoNishikawa

  • The company is a manufacturer of plastic products and headquartered in Aki-gun, Hiroshima Prefecture, with its business comprised of its automotive-related division and its residential housing-related division. The automotive side of the company handles interior parts such as instrument panels and console boxes, exterior parts such as bumpers, radiator grills and door modules, and engine room parts such as cylinder head covers and intake manifolds.
  • Although the amount of product supplied to Mazda is high, since 1967 Mazda has been a major participating shareholder (with a 5.0% share for the fiscal ending March 2018), while the company’s largest shareholder is Nishikawa Rubber Industries (at 16.71%), followed by Inoac Corporation at 5.54%.
  • The company is the 2nd largest supplier of instrument panels in the Japanese market. It supplies 100% of the instrument panels to Mazda.
  • The company was formed in 2007 as a result of a merger between Mazda’s three main suppliers (GP Daikyo, Nishikawa Chemical, and Daikyo Nishikawa). The company is actively working on the development of modularization for components such as doors and instrument panels.
  • The company has an overseas footprint in Thailand and China to supply localized products to Mazda and other OEM.

 

Shigeru

  • Shigeru is the 3rd largest supplier of instrument panel in the Japanese market. 100% of the instrument panels supplied to Subaru are manufactured by Shigeru. Headquartered in Ota City, Gunma Prefecture, where Subaru's main plant is located, approximately 1,000 employees (the entire group: 1,925 people)
  • The company is the interior parts supplier for the instrument panel peripheral parts for all Subaru vehicles. The company also handles seats and exterior parts. In addition to Subaru, a Shigeru subsidiary in Kyushu also supplies instrument panels Daihatsu’s Kyushu Plant.
  • Owns a local manufacturing subsidiary in the U.S. supplying instrument panels and door panels to Subaru and Toyota.

 

Japan Plastics Technologies (JPTech for short; formerly Japan IAC)

  • JPTech is the 4th largest supplier of instrument panel in the Japanese market. It supplies instrument panel primarily to Nissan and Honda.
  • JPTech is a specialty supplier of interior parts with about 450 employees headquartered in Komaki City, Aichi Prefecture, and wholly-owned subsidiary of Michigan-based Akeel Holdings LLC.
  • Formerly the chemical division of Mitsuboshi Belting Ltd., the company began to produce instrument panels in 1965.
    • 100% of shares were transferred to the major American interior and exterior component supplier IAC in 2006, when the company was established as Mitsuboshi Chemical.
    • The company name was changed to Japan IAC in 2011.
    • In December 2016, IAC of the U.S. transferred all shares of Japan IAC to Akeel Holdings LLC, and the company name was again changed to Japan Plastics Technologies Co., Ltd. (JPTech).
  • Headquartered in Nagoya, the company has a total of three domestic plants located in Nagoya, Kyushu, and Kanagawa.
  • JPTech has a joint venture with a Taiwanese company in Wuhan, China, which supplies components such as instrument panels for Honda and Nissan assembly plants in China.

 

Marelli Corporation (Formerly Calsonic Kansei Corporation)

  • Headquartered in Saitama City, Saitama Prefecture, CK is the fifth largest supplier of instrument panels in the Japanese market. Although CK has approximately a 50% of the share of the instrument panels supplied to Nissan, and doesn’t supply product to OEMs other than Daihatsu for a few models, there is a considerable market share gap between them and the four largest suppliers based on production volumes.
  • CK is a general supplier of automotive components that develops and manufactures products such as heat exchange systems, exhaust products, air conditioners, electric/electronic parts, interior parts, and integrated modular systems.
  • CK is ranked as the 5th largest supplier of instrument panels in Japan, and 25th in the world rankings of automobile suppliers for total sales (2016), and 9th among Japanese suppliers on a global basis.
  • Calsonic has long been a major supplier of the Nissan group, but in November 2016 Nissan sold its entire 41% stake in CK to the private equity firm of Kohlberg Kravis Roberts (KKR). Afterwards, KKR transferred its shares to its special purpose subsidiary, CK Holdings, on March 22, 2017. With this stock transaction, CK was officially transferred from CK’s parent company Nissan to the KKR Group investment fund, then spun off, before being delisted from the Tokyo Stock Exchange in May 2017.
  • In May 2019, CK Holdings, which is owned by KKR (Coleberg Kravis Roberts), completed the acquisition of Maganti Marelli, an auto parts division under FCA, for approximately EUR 5.8 billion. The acquisition has resulted in the creation of the world's seventh largest and independent parts manufacturing group with an annual turnover of EUR 15.2 billion, and the group has announced that it will adopt the name "MARELLI" as a the group’s universal brand name. In addition, the holding company "CK Holdings" was renamed to "Manietti Marelli CK Holdings".
  • Calsonic Kansei and Magneti Marelli have overlapping businesses in electronic products and exhaust related parts including instrument panel parts and cluster meters, and these businesses will likely be integrated and standardized in the future. Also, since there is no overlap between Calsonic Kansei's product areas of air conditioners and heat exchangers with Magneti Marelli's powertrain control devices, lighting related devices, and suspension related products, this makes the combined organization a comprehensive supplier of powertrain, body, and chassis products.
  • CK is the only Japanese supplier that produces both the peripheral parts of instrument panels as well as HVAC units, so it can easily assemble CK parts into cockpit modules, which it primarily supplies to Nissan. CK is also supplying cockpit modules to Nissan overseas for local assembly in China, the U.S., and the U.K. Calsonic uses its competitive advantage of being able make cockpit modules in-house as a weapon to fight against its Tier-1 rivals, such as Denso, who manufacture meters and air conditioners but not instrument panels. This allows CK to differentiate itself in the market now that they are out from under the Nissan Group’s umbrella.
  • CK started to supply instrument panels for Daihatsu’s new Cast mini-vehicle in autumn 2015. This was the first time that CK had been sourced by an OEM other than Nissan. Also, there is the possibility of expanding business opportunities with high-value added cockpit modules by incorporating Magneti Marelli's HMI (Human Machine Interface) and connected technology.

 

Suiryo Plastics

  • Headquartered in Kurashiki City, Okayama Prefecture, the company is a wholly-owned subsidiary of Mitsubishi Motors. Suiryo Plastics produces interior and exterior plastic parts such as instrument panels and bumpers for Mitsubishi Motors and Mitsubishi Fuso Trucks & Buses. The company also supplies mechanical components such as HVAC modules and battery covers for the Mitsubishi i-MiEV.
  • The company is currently providing technical support for the development and manufacturing of plastic parts to overseas companies, primarily in Southeast Asia.

 

INOAC Corporation

  • Headquartered in Nagoya, Aichi Prefecture, INOAC an unlisted, independent supplier. The company is a leader in the field of urethane foam parts, mainly interior and exterior parts made of urethane, plastic, rubber, and composite materials. INOAC supplies product primarily to Toyota, Nissan, and Mitsubishi.
  • INOAC manufactures mainly interior parts such as instrument panels and molded ceilings, seat parts such as seat cushions, exterior parts such as aero parts, functional parts such as air intake resonators, and resin molded parts such as moldings.
  • The company is actively expanding its global footprint, partnering with Woodbridge (Canada) in 2007 on urethane foam products and establishing joint ventures in Japan and the U.S. In the U.S., the company formed a joint venture with JCI called Intertec, which is supplying instrument panel trim and consoles to Toyota.
  • Daikyo Nishikawa is the company's principal shareholder (at 5.54% for the fiscal year ending March 2018).

 

Hitachi Chemical Automotive Products

  • Headquartered in Tagawa City, Fukuoka Prefecture, the company is a subsidiary of Hitachi Chemical that manufactures molded plastic parts for automobile interiors. The company supplies all types of instrument panels to Nissan as well as exterior parts to Toyota.
  • Established in 1974 as Kyushu Hitachi Chemical Co., Ltd., it changed its name to the current company name in 2001. In January 2016, it absorbed Shin-Kobe Platex.
  • The company has a joint venture with Isuzu in Thailand to locally supply parts to Nissan and Isuzu plants in Thailand.

 

Moriroku Technology Company

  • Moriroku is a long-established manufacturer of plastic parts for Honda's four-wheeled vehicles and motorcycles, headquartered in Minato-ku, Tokyo, with its main plants in Suzuka City, Mie Prefecture and Ota City, Gunma Prefecture. It is a wholly-owned subsidiary of Moriroku Holdings Co., Ltd., whose roots are in Moriroku Trading Co., which was engaged in distribution of fertilizer since the 17th century.
  • With regards to its overseas manufacturing footprint, the company started supplying localized product to Honda in the U.S., but has since established manufacturing sites in China and the Philippines. Recently the company has started manufacturing product at its joint venture in India.
  • The company produces mainly interior and exterior parts. For instrument panel related products, Moriroku supplies instrument panels, console boxes and glove boxes to Honda.

 

Yachiyo Kogyo

  • Headquartered in Sayama City, Saitama Prefecture, Yachiyo Kogyo is a 50% Honda-owned subsidiary, which assembles some of Honda’s mini vehicles (<660 cc) on a consignment basis.
  • The company also produces fuel tanks, sun roofs, and various plastic components. Some of the plastic parts the company manufactures are used in the instrument panels of a several Honda models.
  • The manufacture of plastic components, including instrument panel parts, is the responsibility of the Kashiwabara Plant (Saitama Prefecture, Japan), Suzuka Plant (Mie Prefecture, Japan), and the Siam Yachiyo Co., Ltd. (Thailand) plant.

 

Kojima Industries Corporation

  • Headquartered in Toyota City, Aichi Prefecture, a Toyota group unlisted supplier of interior and exterior parts. The company does not manufacture the instrument panel itself, but focuses mainly on cockpit peripheral parts such as consoles and cup holders.
  • Product supplied to Toyota accounts for over 50% of the company’s sales revenue. In addition to plastic, the company is manufacturing composite interior and exterior automotive parts, as well as components for electrical and communications applications.

 

Nihon Plast

  • Nihon Plast is a supplier based in Fujinomiya City, Shizuoka Prefecture that manufactures mainly airbags and interior and exterior parts. Honda previously held a 20% interest in Nihon Plast, but in August 2013 Nihon Plast bought back all of the outstanding shares held by Honda.
  • In December, 2017 the company was listed on the First Section of the Tokyo Stock Exchange.
  • The company’s main products are plastic products such as instrument panel-related trim parts and airbags, each accounting for about 50% and 27% of sales, respectively.
  • Regarding instrument panels, the company also manufactures instrument panel ASSY, uppers and lowers, but is focused mainly on instrument consoles and glove boxes, and is supplying product to Honda and Nissan.
  • Locally manufacturers parts in China, Thailand, Indonesia, and North America to supply the overseas local manufacturing sites of Honda and Nissan.

 

Sanko Gosei

  • Headquartered in Nanto City, Toyama Prefecture, the company's main products are automotive components, which account for approximately 64% of the company's total revenuesales (FY 2018). The company is also in the business of precision plastic molding such as for air conditioner parts and mobile phones.
  • Honda is the company’s main customer for automotive parts, for whom it manufactures interior and exterior plastic parts.
  • With regards to instrument panel related components, the company is supplying parts such as center consoles to Honda and Toyota.
  • The company has been aggressively expanding overseas, establishing manufacturing sites in China, South-East Asia, and the U.K. Also, recently, it established a new design and R&D site in India.

 

Sankei

  • Sankei supplies plastic interior and exterior parts such as instrument panels and glove boxes to Suzuki
  • The company’s overseas manufacturing footprint consist of a plant in Indonesia that launched in 2006.

 

Sekisui Techno Molding

  • Headquartered in the Minato Ward of Tokyo, the company is a 100% wholly-owned subsidiary of Sekisui Chemical Co., Ltd.
  • The company manufactures plastic parts for two- and four-wheeled vehicles as well as plastic products for industrial applications.
  • The company’s manufacturing footprint consists of 3 sites in Japan (Mie Prefecture, Aichi Prefecture, and Tochigi Prefecture) and 5 sites oversees, four in India and one in Indonesia.
  • For 4-wheelers, the company manufactures interior plastic parts such as glove boxes, meter hood covers, door trim, package trays and exterior plastic parts such as grill bumpers. Among these, the company supplies glove boxes to Daihatsu

 



Ⅲ. Global development status of major suppliers

1) Global production/R&D facilities

Production Plant/R&D Facility
Toyoda Gosei Marelli (Formerly Calsonic Kansei) INOAC Corporation Hitachi Chemical Yachiyo Kogyo Kojima Industries DaikyoNishikawa
Asia/Pacific
Japan Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
China Production Plant Production Plant
R&D Facility
Production Plant Production Plant
R&D Facility
Production Plant Production Plant
India Production Plant Production Plant Production Plant
Indonesia Production Plant Production Plant R&D Facility
Korea Production Plant R&D Facility
Taiwan Production Plant Production Plant Production Plant Production Plant
Thailand Production Plant Production Plant Production Plant Production Plant Production Plant Production Plant
Australia Production Plant
Americas
Canada Production Plant Production Plant
Mexico Production Plant Production Plant Production Plant Production Plant Production Plant
Brazil Production Plant
U.S. Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
Europe
U.K. Production Plant Production Plant
R&D Facility
Production Plant
Nihon Plast Moriroku Technology Sanko Gosei Suiryo Plastic Shigeru Japan Plastic Technologies Sankei
Asia
Japan Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
Production Plant
R&D Facility
China Production Plant Production Plant
India Production Plant Production Plant
Indonesia Production Plant Production Plant Production Plant
Malaysia Production Plant
The Philippines Production Plant Production Plant
Thailand Production Plant Production Plant Production Plant
Americas
Canada Production Plant
Mexico Production Plant Production Plant
U.S. Production Plant Production Plant Production Plant Production Plant
Europe
German Production Plant
U.K. Production Plant

Note: only shows facilities related to instrument panels.

2) Investment/Ownership Chart








Ⅳ. Major instrument panel suppliers and their customers

I: Instrument Panel / C: Center Console / B: Console Box / O: Overhead Console  / G: Glove Box / M: Meter Panel
() indicates there is a delivery in the past.
※ Excludes vehicle plants (in-house manufacturing and body assembly companies)
  Toyota Nissan Honda Mazda SUBARU Mitsubishi Suzuki Daihatsu
Instrument Panel Toyoda Gosei I C B G         I G    
DaikyoNishikawa   (I) (C) (B) (G)   I C B G       (I)
Shigeru I G       I C G     I G
Japan Plastics Technologies I I C G I G     I C B G   G
(JP Tech)
Marelli (Formerly Calsonic Kansei)   I C B G           I G
Suiryo Plastics   I C G       I C G    
INOAC Corporation I C B G (I) C       I C G    
Hitachi Chemical   C B            
Moriroku Technologies     I B G          
Yachiyo Kogyo     I          
Kojima Industries C G O             G
KyushuKojima Industries
Nihon Plast   G C G          
Sankei   (G)   (G)     I G  
Sekisui Techno               (G)
Sanko Gosei I C G   C          
Kyoshin Plastic C G              
Maruwa Electronic and Chemical O              
Sansyo O              
Kyowa Electric and Chemical B              
Marubishi Industries B         B    
Meter Denso M       M   M M
Calsonic Kansei M M   M        
Nippon Seiki M M M M M M M M
Continental M M         M  
Yazaki / Yazaki Meter     M     M    


Ⅴ. Equipment stats of instrument panels from major suppliers by model

1) Toyota

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Toyota 86 ZN6 2016 - Shigeru - Shigeru Denso
Nippon Seiki
Toyota Allion / Premio T26# 2014 - Toyoda Gosei Toyoda Gosei [C, B] Toyoda Gosei Yazaki
Toyota Alphard / Vellfire #GH3#W 2015 - Toyoda Gosei - Kojima Industries -
(Hybrid) (AYH30W)
Toyota Aqua NHP10 2017 Toyota Motor (In-house) INOAC Sanko Gosei [C] Sanko Gosei Denso
Sanko Gosei
Toyota C-HR NGX50 2017 - Toyoda Gosei - Kojima Industries Continental
(Hybrid) (ZYX10)
Toyota Camry XV70 2018 - Toyoda Gosei Toyoda Gosei [C, B] - -
Daihatsu Altis XV70N
Toyota Corolla Axio/Fielder E16#/G 2016 - INOAC Kyoshin Plastics [C] Kyoshin Plastics Denso
(Hybrid) (NKE165/G) INOAC [B] INOAC
Toyota Dyna (1t) Y22#/23# 2012 Hino Motors (In-house) Hino Motors (In-house) - Kojima Industries Yazaki
/ Toyoace (1t)
Toyota Dyna U6## 2012 Hino Motors (In-house) Hino Motors (In-house) - Kojima Industries Yazaki
/Toyoace
(Hino "Dutro")
Toyota Estima R5#W 2012 Toyota Auto Body (In-house) Toyoda Gosei Kojima Industries [C] Kojima Industries -
(Hybrid) (AHR20W)
Toyota Harrier Z/ASU6#W 2016 - - Toyoda Gosei [B] Kojima Industries Denso
(Hybrid) (AVU65W) Maruwa Electronic and Chemical [O]
Toyota Hiace / Ragius Ace H200 2012 Toyota Auto Body (In-house) Toyota Auto Body (In-house) Kojima Industries [C] Kojima Industries Yazaki
Toyota Land Cruiser UZJ20#W 2016 Toyota Auto Body (In-house) - INOAC [B] - Yazaki
Toyota Land Cruiser Prado J15# 2016 Hino Motors (In-house) Toyoda Gosei Kojima Industries [C] Kojima Industries Yazaki
Toyota Motor (In-house) Toyota Auto Body (In-house) Kyowa Electronic and Chemical [B]
Toyota Mark X GRX13# 2014 Toyota Motor (In-house) Toyoda Gosei Toyoda Gosei [C, B] Toyoda Gosei -
Marubishi Industries [B]
Toyota Porte / Spade NP14# 2013 - - - Kojima Industries Denso
Toyota Prius ZVW5# 2016 - - - - Yazaki
Toyota Prius PHV ZVW52 2017 - Toyoda Gosei - Kojima Industries -
Toyota Prius α ZVW4#W 2012 Toyota Motor (In-house) - - INOAC -
Daihatsu Mebius ZVW41N
Toyota Probox Van XP16# 2014 - Toyoda Gosei Toyoda Gosei [C] Toyoda Gosei -
/ Succeed Van
Toyota Sienta P17#G 2016 - Toyoda Gosei - Kojima Industries Denso
(Hybrid) (NHP170G)
Toyota Vitz XP13# 2014 Toyota Industries (In-house) Toyoda Gosei Toyoda Gosei [C] Kojima Industries -
(Hybrid) (NHP130)
Toyota Voxy / Noah / Esquire (Hybrid) ZRR8#G/W 2014 - Toyoda Gosei Sansyo [O] Toyoda Gosei Yazaki
(ZWR80G/W) Kojima Industries
Toyota/Lexus CT200h ZWA10 2014 Toyota Motor Kyushu (In-house) Toyoda Gosei Toyoda Gosei [C, B] INOAC -
Maruwa Electronic and Chemical [O]
Toyota/Lexus GS200t/350/GSF GRL1#/ARL10 2014 - INOAC Toyoda Gosei [C, B] INOAC -
(GS300h/450h) (AWL10/GWL10)
Toyota/Lexus GX460 URJ150 2014 Toyota Auto Body (In-house) - INOAC [C, B] Kojima Industries Yazaki
Toyota/Lexus IS350 GSE31 2017 - Toyoda Gosei Toyoda Gosei [B] Toyoda Gosei -
(IS300h) (AVE3#)
Toyota/Lexus LC500 URZ100 2017 - Toyoda Gosei Toyoda Gosei [C, B] - Yazaki
(LC500h) (GWZ100)
Toyota/Lexus LS500 VXFA50/55 2018 - Toyoda Gosei Toyoda Gosei [C, B] - Yazaki
(LS500h) (GVF50/55)
Toyota/Lexus LX570 URJ201W 2016 - Toyoda Gosei - Kojima Industries Yazaki
Toyota/Lexus NX300 AGZ1# 2016 - - Kyushu kojima [B, O] Kyushu kojima -
(NX300h) (AYZ1#)
Toyota/Lexus RC300/350/RCF ASC/AVC10 2017 - - Toyoda Gosei [B] - Yazaki
(RC350h) (GSC10)
Toyota/Lexus RX200t/350 AGL/GGL2#W 2016 - Toyoda Gosei Toyoda Gosei [C, B] Kojima Industries Denso
(RX450h) (GYL2#W)

 

2) Nissan

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Nissan Atlas / Cabstar F24 2008 Faurecia - Faurecia [C] - -
Nissan Cima (Hybrid) HGY51 2016 - - - - Marelli (Formerly Calsonic Kansei)
Nissan Cube Z12 2016 - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) [C] Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
/ JPTech
Nissan Dayz Roox B21A 2016 - Suiryo Plastics - - -
Nissan Elgrand E52 2016 - Marelli (Formerly Calsonic Kansei) - JPTech Marelli (Formerly Calsonic Kansei)
/ JPTech
Nissan Fairlady Z Z34 2016 - Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
/ JPTech
Nissan Fuga Y51 2016 - Marelli (Formerly Calsonic Kansei) Hitachi Chemical [B] Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
Nissan Fuga Hybrid HY51 2012 - Marelli (Formerly Calsonic Kansei) Hitachi Chemical [B] - -
Nissan GT-R R35 2016 - Marelli (Formerly Calsonic Kansei) INOAC [C] - Marelli (Formerly Calsonic Kansei)
INOAC Hitachi Chemical [B]
Nissan Juke XF15 2016 - Marelli (Formerly Calsonic Kansei) JPTech [C] Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
Marelli (Formerly Calsonic Kansei)[B]
Nissan Leaf ZE1 2018 - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) [C] - Nippon Seiki
/ JPTech
Nissan Note E12 2018 Calsonic Kansei Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
(Note e-Power) (HE12) / JPTech Nihon Plast
Nissan NV150AD Y12 2014 - Marelli (Formerly Calsonic Kansei) - - -
/ JPTech
Nissan NV200 Vanette / Vanette Wagon M20 2014 - Marelli (Formerly Calsonic Kansei) - JPTech Marelli (Formerly Calsonic Kansei)
Mitubishi DELICA D:3 / JPTech
Nissan NV350 Caravan / Caravan Wagon E26 2014 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
Nissan Patrol Y62 2013 - Marelli (Formerly Calsonic Kansei) JPTech [C] - Marelli (Formerly Calsonic Kansei)
/Armada / JPTech
Nissan Rogue T32 2016 - Marelli (Formerly Calsonic Kansei) - - -
Nissan Serena C27 2018 - Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Nippon Seiki
(Serena e-Power) (HC27) / JPTech Nihon Plast
Suzuki Landy SC27    
Nissan Skyline V37 2016 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) - - Marelli (Formerly Calsonic Kansei)
200GT-t (ICE-T/C) H(N)V37 INOAC
350GT (HV)    
Nissan Sylphy B17 2014 - Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
JPTech
Nissan Teana L33 2016 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
Continental
Nissan X-Trail T32 2018 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) Hitachi Chemical [C] [B] Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei)
/ JPTech
Infiniti Q50 YV37 2016 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) - - Marelli (Formerly Calsonic Kansei)
INOAC
Infiniti Q60 CV37 2016 Marelli (Formerly Calsonic Kansei) - - - -
Infiniti Q70 Y51 2014 - Marelli (Formerly Calsonic Kansei) INOAC [C] - Marelli (Formerly Calsonic Kansei)
Hitachi Chemical [B]
Infiniti QX60 L50 2016 - - - - Continental
Infiniti QX80 Z62 2016 Marelli (Formerly Calsonic Kansei) Marelli (Formerly Calsonic Kansei) JPTech [C] - Marelli (Formerly Calsonic Kansei)
Marelli (Formerly Calsonic Kansei) [B]

 

3) Honda

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Honda Accord (Hybrid) CR7 2017 - JPTech - Nihon Plast Nippon Seiki
Honda Acty Truck HA8/9 2014 Yachiyo Kogyo (In-house) Yachiyo Kogyo - Moriroku Technologies Yazaki
Honda Civic FC/FK 2018 - - - - Nippon Seiki
(Sedan models)
Honda Clarity Fuel Cell ZC4 2016 - - - Nihon Plast -
Honda Fit GK3/4/5/6 2016 - - Sanko Gosei [C] Moriroku Technologies Nippon Seiki
(Hybrid) (GP5/6) Moriroku Technologies [B]
Honda Freed / Freed+ GB5/6 2017 - - - Nihon Plast Nippon Seiki
(Freed / Freed+ Hybrid) (GB7/8)
Honda Jade FR5 2016 - - - - Yazaki
(Hybrid) (FR4)
Honda Legend KC2/KC1 2016 - - - Nihon Plast -
Accura RLX JPTech
Honda N BOX JF3/4 2018 - Moriroku Technologies - - Nippon Seiki
Honda N-ONE JG1/2 2014 - - - Moriroku Technologies Nippon Seiki
Honda N-WGN JH1/2 2014 - - - Moriroku Technologies -
Honda Odyssey RC1/2 2016 - - Nihon Plast [C] Moriroku Technologies Nippon Seiki
(Hybrid) (RC4)
Honda S660 JW5 2015 - - - - Nippon Seiki
Honda SHUTTLE GK8/9 2016 - - - Moriroku Technologies -
(Hybrid) (GP7/8)
Honda Step Wgn RP1/2/3/4 2016 - - - Moriroku Technologies -
(Hybrid) (RP5)
Honda Vezel (HR-V) RU1/2 2016 - - Moriroku Technologies [B] Nihon Plast -
(Hybrid) (RU3/4)

 

4) Mazda

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Mazda Atenza (Mazda 6) GJ 2016 - DaikyoNishikawa DaikyoNishikawa [C] DaikyoNishikawa NS West(Nippon Seiki)
Mazda Atenza Wagon GJ 2016 - DaikyoNishikawa DaikyoNishikawa [C] DaikyoNishikawa -
Mazda Axela (Mazda 3) BM 2016 - DaikyoNishikawa DaikyoNishikawa [C] DaikyoNishikawa NS West(Nippon Seiki)
(Hybrid) (BY)
- May 2019  
Mazda Axela Sport BM/BY 2016 - DaikyoNishikawa DaikyoNishikawa [C] DaikyoNishikawa -
Mazda Bongo Truck SLP2L/T 2014 - DaikyoNishikawa DaikyoNishikawa [C] [B] DaikyoNishikawa -
Mazda Bongo Van SLP2V/M 2014 - DaikyoNishikawa DaikyoNishikawa [C] DaikyoNishikawa NS West(Nippon Seiki)
Mazda CX-3 DK 2016 - DaikyoNishikawa - DaikyoNishikawa Calsonic Kansei
Mazda CX-5 KF 2018 - DaikyoNishikawa - DaikyoNishikawa NS West(Nippon Seiki)
Mazda CX-8 3DA-KG2P 2018 - DaikyoNishikawa - - -
Mazda CX-9 Gen-2 2017 - DaikyoNishikawa - - -
Mazda Demio (Mazda 2) DJ 2016 - DaikyoNishikawa - DaikyoNishikawa NS West(Nippon Seiki)
Mazda Roadster ND 2018 - DaikyoNishikawa - DaikyoNishikawa NS West(Nippon Seiki)
Roadster RF

 

5) SUBARU

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Subaru BRZ ZC6 2016 - Shigeru - Shigeru Nippon Seiki
Denso
Subaru Impreza GT/GK 2018 - Shigeru Shigeru Shigeru Nippon Seiki
SUBARU Legacy BN/BS 2017 - Shigeru Shigeru Shigeru Denso
Legacy Outback
Subaru Levorg VM4/VMG 2018 - Shigeru Shigeru Shigeru Nippon Seiki
Subaru WRX S4 VAG 2018 - Shigeru Shigeru Shigeru Nippon Seiki
WRX STI VAB
SUBARU XV GT 2018 - Shigeru Shigeru Shigeru Nippon Seiki
(XV Hybrid)

 

6) Mitsubishi

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Mitsubishi Delica D:5 CV#W 2016 - JPTech INOAC [C] JPTech Nippon Seiki
Mitsubishi eK Space B11A 2016 - Suiryo Plastics Suiryo Plastics [C] Suiryo Plastics -
Mitsubishi i-MiEV HA3W/4W 2016 - Suiryo Plastics Suiryo Plastics [C] Suiryo Plastics Nippon Seiki
Mitsubishi Minicab MiEV U68V 2012 - Suiryo Plastics Suiryo Plastics [C] Suiryo Plastics -
Mitsubishi Outlander GF7W/8W 2016 - Toyoda Gosei JPTech [B] Toyoda Gosei Nippon Seiki
Mitsubishi Outlander PHEV GG2W 2018 - Toyoda Gosei - Toyoda Gosei Nippon Seiki
Mitsubishi Pajero V83/7/8 2016 - INOAC JPTech [B] [C] INOAC Yazaki
V93/7/8W Marubishi Industries [B] Nippon Seiki
Mitsubishi RVR (ASX) GA3W/GA4W 2016 - Toyoda Gosei JPTech [B] [C] Toyoda Gosei Nippon Seiki

 

7) Suzuki

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Suzuki Alto A36S/36V 2016 Suzuki (In-house) Suzuki (In-house) - Sankei Nippon Seiki
Mazda Carol HB36S Sankei (Some parts)
Suzuki Alto Lapin HE33S 2016 Suzuki (In-house) Suzuki (In-house)   Sankei  
Sankei (Some parts)
Suzuki Escudo / Grand Vitara YD/YE21S/YEA1S 2016 Suzuki (In-house) Suzuki (In-house) - Sankei Nippon Seiki
Sankei (Some parts) Continental
Suzuki Every Wagon DA17W 2016 Suzuki (In-house) Suzuki (In-house) - Sankei -
Mazda Scrum Wagon DG17W
Mitsubishi Town Box DS17W
Nissan NV100 Clipper Rio DR17W
Suzuki Hustler MR31S/MR41S 2016 Suzuki (In-house) Suzuki (In-house) - Sankei -
Mazda Flair Crossover MS31S/MS41S Sankei (Some parts)
Suzuki Ignis (Hybrid) FF21S 2016 Suzuki (In-house) Suzuki (In-house) - Sankei -
Sankei (Some parts)
Suzuki Solio Mild Hybrid MA26S/36S 2017 Suzuki (In-house) Suzuki (In-house) - Sankei Denso
(Full Hybrid) (MA46S) Sankei (Some parts)
Mitsubishi Delica D:2 Mild Hybrid MB36S  
(Hybrid) (MB46S)  
Suzuki Spacia MK53S 2018 Suzuki (In-house) Suzuki (In-house) - Sankei Denso
Mazda Flair Wagon MM53S Sankei (Some parts)
Suzuki Spacia Gear MK53S 2019 Suzuki (In-house) Suzuki (In-house) - Sankei Denso
Sankei (Some parts)
Suzuki Swift ZC13S/33S 2017 Suzuki (In-house) Suzuki (In-house) - Sankei Continental
[Mild Hybrid] ZC/ZD83S Sankei (Some parts)
[Full Hybrid] [ZC/ZD53S]  
  (ZC43S)  
Suzuki Wagon R MH35S/55S 2017 Suzuki (In-house) Suzuki (In-house) - Sankei Denso
Mazda Flair MJ55S Sankei (Some parts)
Suzuki XBEE MN71S 2018 Suzuki (In-house) Suzuki (In-house) - Sankei -
Sankei (Some parts)

 

8) Daihatsu

OEM Model Name Model MY Instrument Panel Assembly
Cockpit
Module
Instrument
Panel
Console
[C] Center
[B] Box
[O] Overhead
Glove Compartment Meter
Daihatsu Atrai Wagon S320G/331G 2016 - Shigeru - Shigeru NS West(Nippon Seiki)
Subaru Dias Wagon S321/331 Denso
Daihatsu Boon M7#0A 2015 - - - Kojima Industries -
Toyota Passo M700A
Daihatsu Cast LA250S/260S 2016 - Marelli (Formerly Calsonic Kansei) - Marelli (Formerly Calsonic Kansei) -
Toyota Pixis Joy LA250A/260A
Daihatsu Hijet Cargo S321/331V 2014 - Shigeru - -  
Toyota Pixis Van S321M/331M
Subaru Samber Van S321B/331B
Daihatsu Hijet Truck S500/510P 2014 - Shigeru - - -
Toyota Pixis Truck S500U/510U
Subaru Samber Truck S500J/510J
Daihatsu Mira e:S LA350S/360S 2018 - - - - Nippon Seiki
Toyota Pixis Epoch LA350A/360A
Subaru Pleo+ LA350F/360F
Daihatsu TanTo / Custom LA600S/610S 2018 Daihatsu (In-house) - - - Nippon Seiki
Subaru Chiffon LA600F/610F
Daihatsu Thor M9#0S 2017 - - - Kojima Industries -
Toyota Roomy / Tank M900A/910A
Subaru Justy M900F/M910F



Ⅵ. Sales of major instrument panel suppliers

Sales Figures (Consolidated Basis)

(JPY millions) March 2015 March 2016 March 2017 March 2018
Toyoda Gosei 727,846 781,886 755,601 806,938
Calsonic Kansei 965,564 1,053,318 1,012,600 998,600
INOAC Corporation December 2014 December 2015 December 2016 December 2017
163,000 161,600 N.A. 170,000
Hitachi Chemical 525,061 546,468 554,144 669,234
Yachiyo Kogyo 150,225 149,816 138,979 165,562
Kojima Industries Corporation December 2014 December 2015 December 2016 December 2017
137,600 154,100 163,200 174,200
DaikyoNishikawa 134,343 160,779 155,643 171,967
Nihon Plast 123,325 139,183 128,652 114,689
Moriroku Technologies 161,170 172,224 170,005 182,177
Sanko Gosei May 2015 May 2016 May 2017 May 2018
50,174 55,641 56,159 58,339


Detailed list of global facilities

Note: Only facilities related to the development and production of instrument panels and their parts are shown.

Type: ○Regional Controller ●Production Plant ★R&D Facility
Country Facility Name Location Type Investment Ratio Joint Venture Partner Major Customers Parts Produced
Toyoda Gosei Toyota Motors 42.84%
Asia/Pacific
Japan Toyoda Gosei Kitajima Technology Center Inazawa (Aichi) - Toyota、
Daihatsu、
Suzuki
Japan Toyoda Gosei Miwa Technology Center Miwa, Ama District -
Japan Toyoda Gosei Inazawa Plant Inazawa (Aichi) - Interior/Exterior Parts、Functional Parts
Japan Toyoda Gosei Bisai Plant Ichinomiya (Aichi) - Interior/Exterior Parts、Safety System Components
Japan Toyoda Gosei Kitakyushu Plant Kitakyushu (Fukuoka) - Interior/Exterior Parts、Safety System Components、Automotive Sealant、Functional Parts
Japan Toyoda Gosei Kanagawa Plant Isehara (Kanagawa) - Interior/Exterior Parts、Functional Parts
Japan Toyoda Gosei Seto Plant Seto (Aichi) - Interior/Exterior Parts
Japan Toyoda Gosei Fukuoka Plant Miyawaka (Fukuoka) - Interior/Exterior Parts、Safety System Components、Functional Parts
Japan Toyoda Gosei Kamiina District (Nagano) 100 Interior/Exterior Parts、Safety System Components
Japan Toyoda Gosei Interior Manufacturing Togo (Aichi) 100 Interior/Exterior Parts
Japan TGAP Ichinomiya (Aichi) 100 Interior/Exterior Parts
China Tianjin Toyoda Gosei Co,. Ltd. Tianjin 90.1 Tianjin市刹車管廠 4.9
Toyota Tsusho 5
Interior/Exterior Parts、Safety System Components、Functional Parts
China Toyoda Gosei (Zhangjiagang) Plastic Parts Co., Ltd. Jiansgu 96.1 Kanto Kasei Kogyo 3.9 Interior/Exterior Parts
China Toyoda Gosei (Foshan) Plastic Parts Co., Ltd. Foshan 95
(30)
(豊裕股份有限公司 )30
Toyota Tsusho 5
Interior/Exterior Parts
India TG Kirloskar Automotive Pvt. Ltd. Ramanagara Taluk
(Bangalore)
69 Kirloskar Systems 26
Toyota Tsusho 5
Interior/Exterior Parts、Safety System Components
Taiwan Fong Yue Co., Ltd. Hwukoou, Hsinchu 75 張盈泉他 (台裕) 12
Tong Yang Industry Co., Ltd. 10
建台豊股份 3
Interior/Exterior Parts、Safety System Components
Thailand Toyoda Gosei Asia Co.,Ltd. Pantong (Chonburi) 100 Thailand Regional Controller (Sales、Technical Services、Administration)
Thailand Toyoda Gosei (Thailand) Co., Ltd Pantong (Chonburi) 78.5
(78.5)
(Toyoda Gosei Asia) 78.5
Toyota Tsusho (Thailand) 9
ポンパラポリマー 10
SP International 2.5
Interior/Exterior Parts、Safety System Components、
Functional Parts
Australia Toyoda Gosei Australia (Pty) Ltd. South Road
Edwardstown
(South Australia)
50.5 Automotive Sealant、
Interior/Exterior Parts、Safety System Components
Americas
Canada TG Minto Corporation Palmerston (ON) 100
(100)
(Toyoda Gosei Holdings Inc.) 100 Interior/Exterior Parts
U.S. Toyoda Gosei North America Corporation Troy (MI) ○★ 100 U.S. Regional Controller (Sales, design, development, evaluation etc.)
U.S. TG Missouri Corporation Perryville (MO) 80 (Toyoda Gosei North America) 80
Mitsui & Co. 20
Interior/Exterior Parts、Safety System Components
U.S. Toyoda Gosei Texas, LLC San Antonio (TX) 100
(100)
(Toyoda Gosei North America) 100 Interior/Exterior Parts
U.S. TG Kentucky, LLC Lebanon (KY) 100
(100)
(Toyoda Gosei North America) 100 Interior/Exterior Parts、Functional Parts
Brazil GDBR Industria e Comercio de Componentes Quimicos e de Borracha Ltda. Sao Paulo 94.8 Automotive Sealant、Interior/Exterior Parts、Safety System Components
Europe
U.K. Toyoda Gosei UK Ltd. South Yorkshire 91.1 Automotive Sealant、Interior/Exterior Parts
Marelli Corporation (Formerly Calsonic Kansei Corporation)
Asia/Pacific
Japan Calsonic Kansei R&D Center Saitama (Saitama) -
Japan Calsonic Kansei Yoshimi Plant Yoshimi, Hiki District
(Saitama)
- Instrument Panel、Center Console
Japan CKF Nihonmatsu (Fukushima) 100 Meters、Sensors、Precision Miniature Plastics
Japan CKK Usa Plant Usa (Oita) 100 Instrument Panel、Radiator Grille
Japan CKP Tochigi Plant Shimotsuke (Tochigi) 100 Instrument Panel、Cluster Assembly、Console Lid
Japan KS Engineering Yoshimi, Hiki District
(Saitama)
100 Injection Molded Die、Foam Molded Die、Press Die
China Calsonic Kansei (China) Holding Company Shanghai 100 China Administration
China Calsonic Kansei (Shanghai) Automotive Technology R&D Co. Limited Shanghai 100 R&D
China Calsonic Kansei (Shanghai) Automotive Technology R&D Co.Limited.
Guangzhou Branch
Guangzhou R&D
China Calsonic Kansei (Guangzhou) Components Corp. Guangzhou 100 Instrument Panel、Meter、Exhaust System
China Calsonic Kansei (Guangzhou) Corp. Guangzhou 100 Cockpit Module、Front-end Module
China CK KS Engineering (Guangzhou) Tooling Center Corp. Guangzhou 100
(100)
(Calsonic Kansei China Investments) 100 Die
Korea Calsonic Kansei Korea Corp. Kimhae 84.9 Local 15.1 Cockpit Module、Front-end Module、Exhaust System
Taiwan Yueki Industrial Co., Ltd. Hukou, Hsinchu 49 Yulon Motor 51 Instrument Panel、
Interior/Exterior Plastics
Americas
Mexico Calsonic Kansei Mexicana, SA de C.V. Aguas Calientes 100 Instrument Panel、Air Conditioner System、Meter、Exhaust System
U.S. Calsonic Kansei North America, Inc. Shelbyville (TN) 100 Cockpit Module、FR End Module、Air Conditioner System、Exhaust System
U.S. Calsonic Kansei North America
Technical Center
Farmington Hills (MI) 100
Europe
U.K. Calsonic Kansei Europe PLC Llanelli 100 Europe Regional Controller
U.K. Calsonic Kansei Europe
Technology Center
Llanelli R&D
U.K. Calsonic Kansei Sunderland Ltd. Sunderland
(Tyne & Wear)
100
(100)
(Calsonic Kansei Europe PLC) 100 Cockpit Module、Instrument Panel
INOAC Corporation
Asia
Japan INOAC Corporation Anjo Facility Anjo (Aichi) - Instrument Panel、Headliner、Seat Cushion
Japan INOAC Corporation Sakurai Facility Anjo (Aichi) - Large Injection Plastics (Instrument Panel、Bumper)、
Extrusion Mold、Spoiler
Japan INOAC Corporation Nanno Facility Kaizu (Gifu) - Seat Cushion、Headrest
Japan INOAC Corporation Seino Facility Ibi District (Gifu) -
Japan INOAC Corporation Shinshiro Facility Shinshiro (Aichi) - Headliner、Seat Cushion、Headrest
Japan INOAC Corporation Yana Facility Shinshiro (Aichi) - -
Japan INOAC Corporation Toyohashi Plant Toyohashi (Aichi) - Headrest
Japan INOAC Corporation Takeyutaka Plant Chita District (Aichi) - -
Japan INOAC Corporation Kira Plant Nishio (Aichi) -
Japan INOAC R&D Hadano (Kanagawa) -
Japan Tohoku INOAC Kitakami Plant Kitakami (Iwate) 100 Automobile Products
Japan Tohoku INOAC Kodata Plant Toda District (Miyagi) Automobile Products、Communication Device Components、Rubber Products、Polyurethane Foam Board、Urethane System Materials
Japan Tohoku INOAC Wakayanagi Plant Kurihara (Miyagi) Automobile Products、Communication Device Components、Automobile Tires
Japan East Japan INOAC Ichikawamisato, Nishiyatsushiro District
(Yamanashi)
100 Automobile Products、Household Products、
Urethane Foam Products
Japan West Japan INOAC Kita-Hiroshima, Yamagata District
(Hiroshima)
100 Automobile Device、Urethane Foam Products
Japan Kyushu INOAC Ukiha Plant Ukiha (Fukuoka) 100 Headrest、Center Armrest、Urethane Foam Products
Japan Kyushu INOAC Kikuchi Plant Kikuchi (Kumamoto) Interior Plastics、Exterior Extrusion Mold、Communication Device Components
Japan Kyushu INOAC Kitakyushu Plant Okagaki, Onga District
(Fukuoka)
Automobile Products Production
Japan I.W. Foam Corporation Anjo Facility Anjo (Aichi) N/A Woodbridge Foam (Canada) Urethane Foam Products、
Automobile Products Production
Japan I.W. Foam Corporation Nanno Facility Kaizu (Gifu) Urethane Foam Products、
Automobile Products Production
Japan Takahama Chemical Takahama (Aichi) N/A Automobile Products Production
Japan Daito Kasei Isshiki, Hazu District (Aichi) N/A Automobile Products Production
China INOAC CORPORATION
Shanghai Office
Shanghai China Country Controller
China Tianjin Inoac Polymer Co., Ltd. Tianjin 100 Automobile Interior Parts
Production and Sales
China Dongguan Inoac Kenjou Automotive Co., Ltd. Dongguan N/A (Kenjou Co., Ltd.) Automobile Interior/Exterior Parts
Production and Sales
China Ningbo Inoac Huaxiang Automobile Products Co., Ltd. Ningbo N/A Automobile Interior/Exterior Plastics
China Tianjin Inoac Huaxiang Automotive Products Co., Ltd. Tianjin Automobile Interior/Exterior Plasticsの
Production and Sales
Taiwan Kenjou Industrial Co., Ltd. Taichung 40 Howa Sangyo 10
Kenda Kogyo 50
Automobile Interior/Exterior Parts
(Instrument Panel、Wheel Cap、Duct)
Thailand Inoac (Thailand) Co., Ltd. Bangna (Bangkok) ○★ 100 Thailand Regional Controller、R&D
Thailand Inoac Automotive (Thailand) Co., Ltd. Amphur Muang
(Chonburi)
90.6
(90.6)
(Inoac (Thailand) Co., Ltd.) 90.6
Local 9.4
Automobile Interior/Exterior Partsの
Production and Sales
Indonesia P.T. IRC Inoac Indonesia Jakarta N/A Automobile Interior/Exterior Parts、Industrial Rubber Products、Urethane Foam、Furniture Production and Sales
Indonesia P.T. Inoac Polytechno Indonesia Jakarta N/A Automobile Interior/Exterior Parts Production and Sales、Urethane Foam Production and Sales、Furniture Production and Sales
Americas
Canada INTERTEC SYSTEMS Partnership (ITS-CAN) St. Mary's (ON) 50
(50)
(Inoac USA Inc.) 50
Hoover Universal Inc. (JCI) 50
Automobile Interior Parts
(Instrument Panel、Airbag Door)
Canada Blenheim Interior Trim LLP. Blenheim (ON) N/A Automobile Interior Parts Production and Sales
Mexico Saltillo Interior Trim S.A. de C.V. Ramos Arizpe
(Coahuila)
50 Woodbridge Foam (Canada) 50 Automobile Interior Parts Production and Sales
U.S. Inoac USA Inc. Troy (MI) 100 U.S. Regional Controller
U.S. Inoac Group North America, LLC. Troy (MI) 100
(100)
(Inoac USA Inc.) 100 Automobile Interior Parts Production and Sales、
Foam Products Production and Sales
U.S. Intertec Systems, L.L.C. Plymouth (MI) 50
(50)
(Inoac USA Inc.) 50
Hoover Universal Inc.(JCI) 50
Automobile Interior Parts
(Instrument Panel、Door Trim)
U.S. Springfield Interior Trim LLC. Drive Springfield
(KY)
N/A Automobile Interior Parts
(Armrest、Console、Glove Compartment Door)
U.S. Inos Technologies, LLC Ann Arbor (MI) R&D
U.S. SW Foam LLC EL Paso (TX) Automobile Interior Parts Production and Sales
Hitachi Chemical Automotive Products Co., Ltd
Asia
Japan Hitachi Chemical Automotive Products Co., Ltd Tagawa (Fukuoka) 100 Nissan Kyushu Automobile Interior/Exterior Plastics Molding (Instrument Panel、Console Box、Door Trim)、
Back Door Module
Thailand Hitachi Chemical Automotive Products (Thailand) Co., Ltd. Amphur Pluakdaeng
(Rayong)
51 Isuzu Motors (Thailand) Co.,Ltd. 49 Automobile Interior/Exterior Products
Production and Sales
China Hitachi Chemical (China) Co., Ltd. Shanghai China Investments and China Group Companies Administration and Support
China Hitachi Chemical Automotive Products (Zhengzhou) Co., Ltd. Zhengzhou Automobile Interior/Exterior Products Production and Sales
Yachiyo Kogyo Honda 50.34%
Asia
Japan Yachiyo Kogyo Suzuka PLant Suzuka (Mie) - Instrument Panel、Bumper、Lower Skirt
Japan Yachiyo Kogyo Kashiwabara Plant Sayama (Saitama) -
Thailand Siam Yachiyo Co., Ltd. Amphur Srimahaphot
(Prachinburi)
100
Kojima Industries Corporation
Asia
Japan Kojima Industries Corporation HQ Shimoichiba Plant Toyota (Aichi) ★● - Metals、Plastics、Electronic Component Design and Planning、Metal Parts Production
Japan Kojima Industries Corporation Takaoka Plant Toyota (Aichi) - Plastics (Interior/Exterior)
Japan Kojima Industries Corporation Kojima General Research Facility Miyoshi (Aichi) - Automobile Parts R&D
Japan Daiwa Kasei Kogyo Okazaki (Aichi) Automobile Interior/Exterior Parts Production and Sales
Japan Meiwa Kogyo Tajimi (Gifu) Automobile Interior Parts Production
Japan Maruwa Electronic and Chemical Toyota (Aichi) Automobile Interior Parts Production
Japan Howa Kasei Toyota (Aichi) Automobile Interior Plastic Parts Production
Japan Kotake Kasei Kurate District (Fukuoka) Automobile Interior/Exterior Parts Production (Console、Ornamental Parts、Cup Holder)
China Dongguan Daiwa Kasei Auto Parts Co., Ltd. (DAC) Guangdong N/A
Thailand Daiwa Kasei (Thailand) Co., Ltd. (DAT) Ayutthaya N/A
Indonesia PT. Kojima Auto Technology Indonesia Bekasi N/A Plastic Automobile Parts Production
Americas
U.S. DA Inc. (IN) N/A Center Panel
U.S. Kyowa America (CA) N/A Kyowa Electronic and Chemical
DaikyoNishikawa
Asia
Japan DaikyoNishikawa Yano Office Hiroshima (Hiroshima) -
Japan DaikyoNishikawa Hachihonmatsu Higashi-hiroshima (Hiroshima) - Instrument Panel、Floor Mat、Bumper、Roof Rack、Intake Manifold、Cover、Gear
Japan DaikyoNishikawa Kabe Plant Hiroshima (Hiroshima) -
Japan DaikyoNishikawa Tsuruhama Plant Hofu (Yamaguchi) -
Japan DaikyoNishikawa Nishiura Plant Hofu (Yamaguchi) -
Japan DaikyoNishikawa Mie Plant Matsusaka (Mie) -
Japan Technical Test Center Hiroshima (Hiroshima) R&D Center
Japan Sanshin Kako Hiroshima (Hiroshima) Automobile Plastics Production and Sales
Japan AFT Gamo District (Saga) Automobile Plastics Production、Development of Production Equipment/Jig
Korea GP Daikyo Korea Corporation Gunpo 90.9 Local 9 Automobile Plastics Design and Development
Thailand DMS Tech Co., Ltd Amphur Muang
(Samutprakarn)
70 Miyakawa Kasei 20
Srithai Miyagawa Co., Ltd. 10
Automobile Plastics Production and Sales
Thailand Daikyo Nishikawa (Thailand) Co., Ltd. Amphur Pluakdaeng
(Rayong)
N/A Automobile Plastics Production and Sales
Taiwan Ru Yang Industry Co., Ltd. Tainan 39 Sumitomo Corporation 10
Tong Yang Group 51
Automobile Plastics Production and Sales
China DaikyoNishikawa KaiYang Auto Parts (Nanjing) Co., Ltd. Nanjing Automobile Plastics Production and Sales
China DaikyoNishikawa Auto Parts (Changshu)Co.,Ltd. Changshu Automobile Plastics Production and Sales
China Changchun Wanlong DaikyoNishikawa Auto Parts Co., Ltd. Changchun Automobile Plastics Production and Sales
Indonesia PT.DaikyoNishikawa Tenma Indonesia Bekasi Automobile Plastics Sales and Development
Americas
Mexico DaikyoNishikawa Mexicana,S.A.de C.V. Guanajuato Automobile Plastics Production and Sales
Nihon Plast
Asia
Japan Nihon Plast Technical Center Fujinomiya (Shizuoka) -
Japan Nihon Plast Isesaki Plant Isesaki (Gunma) - Instrument Panel、Console Box、Air Spoiler、
Protector Fender、Cover Cowl Top、Ventilator
Japan Tosen Plast Chikujo District (Fukuoka) 29 Automobile Compound Plastics Production and Sales
Thailand Nihon Plast (Thailand) Co.,Ltd. Amphur Pluakdaeng
(Rayong)
100 Airbag、Handle、Interior/Exterior Plastics
Americas
Mexico Nihon Plast Mexicana S.A.de C.V. El Marques
(Queretaro)
100 Steering Wheel、Leather Steering Wheel、
Leather Gear Stick、Automobile Interior Plastics
U.S. Neaton Rome Inc. Rome (GA) 100
(100)
(Neaton Auto Products Mfg.) 100 Interior/Exterior Plastics、Handle
U.S. Neaton Auto Products Manufacturing Inc. Eaton (OH) 100 Steering Wheel、Airbag、Automobile Interior/Exterior Plastics、Ventilator
Moriroku Technologies
Asia
Japan Moriroku Technologies Development Center Mooka (Tochigi) -
Japan Moriroku Technologies Suzuka Plant Suzuka (Mie) - Interior Parts (Instrument Panel、Center Console、Glove Compartment)、Exterior Parts (Front Grille、Engine Cover、Cowl Top)
Japan Moriroku Technologies Kanto Plant Oizumi, Ora District (Gunma) -
Japan Moriroku Technologies Meiwa Plant Meiwa, Ora District (Gunma) -
Japan Yuko Yamakita, Ashigarakami District
(Kanagawa)
100 Automobile Two and Four Wheel Vehicle
Plastic Products
Japan Kumamoto Moriroku Chemical Ozu, Kikuchi District (Kumamoto) 100 Automobile Two and Four Wheel Vehicle Plastic Products
China
Guanzhou Moriroku Technology Co., Ltd.
Guangzhou 100 Automobile Parts Production and Sales
China
Wuhan Moriroku Technology Co., Ltd.
Wuhan 100 Automobile Parts Production and Sales
India Moriroku Technology India Pvt. Ltd. Noida Uttar Pradesh 93 UT Automobile Parts Production and Sales
The Philippines Moriroku Philippines, Inc. Binan (Laguna) 100 Automobile Parts Production and Sales
Thailand Moriroku Technology (Thailand) Co., Ltd. Amphur Sriracha
(Chonbur)
Automobile Parts Production and Sales
Indonesia PT. Moriroku Technology Indonesia Karawang
(Jawa Barat)
Automobile Parts Production and Sales
Americas
Canada Listowel Technology, Inc. Listowel (ON) N/A (Greenville Technology, Inc.) Automobile Plastic Parts
U.S. Greenville Technology, Inc. Greenville (OH) 100 Automobile Plastic Parts
U.S. Rainsville Technology, Inc. Rainsville (AL) N/A (Greenville Technology, Inc.) Automobile Plastic Parts
*All companies owned by parent Moriroku Technologies
Sanko Gosei
Asia/Pacific
Japan Sanko Gosei HQ Toyama Plant Tonami (Toyama) -
Japan Sanko Gosei Technical Center Tonami (Toyama) -
Japan Sanko Gosei Kumagaya Plant Kumagaya (Saitama) -
Japan Sanko Gosei Gunma Plant Takasaki (Gunma) -
Japan Sanko Gosei Shizuoka Plant Kakegawa (Shizuoka) -
Japan Sanko Gosei Shiga Plant Higashiomi (Shiga) -
Indonesia PT. Sanko Gosei Technology Indonesia Jakarta 88
(19)
(Sanko Gosei Technology (Singapore) Pte.Ltd.) 19
Mitsui & Co. 12
Molded Plastics Production and Sales and
Plastic Molding Die Sales
Malaysia Permintex Sanko Technologies Sdn. Berhad Rawang, Selangor 20 Mitsui & Co. 10
Permintex 70
Molded Plastics Production and Sales and
Plastic Molding Die Sales
Thailand Sanko Gosei Thailand Ltd Phranakorn Sri
(Ayutthaya)
100 Molded Plastics Production and Sales and
Plastic Molding Die Sales
Thailand Sanko Gosei Technology (Thailand) Ltd. Amphur Plunakdaeng
(Rayong)
60 Nagase Sangyo 40 Molded Plastics Production and Sales and
Plastic Molding Die Sales
Singapore Sanko Gosei Technology (Singapore) Pte. Ltd. Singapore 90 Molded Plastics Production and Sales and
Plastic Molding Die Sales
China Tianjin Sanko Gosei Ltd. Tianjin 100 Molded Plastics Production and Sales and
Plastic Molding Die Sales
China Shanghai Sanko Gosei Technology Ltd. Shanghai 90 Molded Plastics Production and Sales and
Plastic Molding Die Sales
China Sanko Gosei Engineering (Guangzhou) Co., Ltd. Guangzhou 100 Molded Plastics Production and Sales and
Plastic Molding Die Sales
The Philippines Sanko Gosei Philippines, Inc. Batangas
(Philippines)
Molded Plastics Production and Sales and
Molding Die Sales
Europe
U.K. Sanko Gosei UK Ltd Skelmersdale
(Lancashire)
100 Molded Plastics Production and Sales and
Plastic Molding Die Sales
Americas
Mexico Sanko Gosei Mexico S.A. de C.V. Guanajuato (Mexico) 100 Molded Plastics Production and Sales and Plastic Molding Die Sales
 Suiryo Plastics Co., Ltd. Mitsubishi Motors 100%
Asia
Japan Suiryo Plastics HQ Kurashiki (Okayama) - Mitsubishi Motors 、
Mitsubishi Fuso Truck and Bus
Instrument Panel、
Bumper Face、
Door Trim、Headliner、Engine Cover
Japan Suiryo Plastics Kibi Plant Soja (Okayama) -
Shigeru
Asia
Japan Shigeru HQ Ota (Gunma) - Instrument Panel
Japan Shigeru Ichinokura Plant Ota (Gunma) - Door Trim、Sunvisor、Seat、Front Grille
Japan Sieger Nakatsu (Oita) N/A Daihatsu Kyushu Instrument Panel、Door Trim
Japan Atos Ota (Gunma) N/A Plastic Part Production and Sales
Americas
U.S. Heartland Automotive LLC Greencastle (IN) N/A Instrument Panel、
Door Panel
Lafayette (IN)
Japan Plastic Technologies (JPTech)Akeel Holdings LLC 100%
Asia
Japan Japan Plastic Technologies HQ Nagoya Plant Komaki (Aichi) - Interior Parts (Instrument Panel、Console Box、Glove Compartment、Door Trim、Armrest)、Exterior Parts
(Radiator Grille)
Japan Japan Plastic Technologies Kanagawa Plant Yokosuka (Kanagawa) -
Japan Japan Plastic Technologies Yokouchi Plant Komaki (Aichi) -
Japan Japan Plastic Technologies Kyushu Plant Yukuhashi (Fukuoka) -
China Wuhan Xiangxing Automobile Parts Co., Ltd. Wuhan 75 Taiwan Tong Yang Group 25 Interior Parts (Instrument Panel、Console Box、Glove Compartment)
Sankei
Asia/Pacific
Japan Sankei HQ Ryuyo Plant Iwata (Shizuoka) - Interior/Exterior Plastics (Instrument Panel Parts、Glove Compartment、Radiator Grille、Splash Guard)
Indonesia PT. Sankeikid Manutec Indonesia Karawang N/A

Note: Joint venture partners in () are investment subsidiaries
       Investment Ratio () indicate indirect ownership percentage.



<Automobile industry portal MarkLines>