On April 29, AvtoVAZ announced that it will conduct a large-scale program between May 1 and 13, 2026, to install new technological equipment for the production of the LADA Azimut crossover, modernize the LADA NIVA family assembly line, and perform routine repairs and maintenance of key facilities and production syste

On April 15, AvtoVAZ started pre-orders for the SKM M7 minivans and all-metal vans, with prices to be revealed soon.
The SKM M7 minivans and vans are powered by a 2.0-liter naturally aspirated gasoline engine producing 137 hp of power, paired with a 5-speed manual transmission and rear-wheel drive. They feature a fi

On April 9, AvtoVAZ announced that LADA Azimut recently went through another round of testing at the AVTOVAZ proving grounds to prepare for production and certification. The results showed that the vehicle is reliable and well suited to Russian roads and weather conditions.
Since 2023, AVTOVAZ has used a new climate

On April 2, AvtoVAZ announced that LADA Azimut crossovers has completed the latest stage of factory passive safety validation testing, which included over 100 passive safety evaluations covering the vehicle and its components, such as frontal and side crash tests, side pole impacts, and rear-end collisions. 
During t

On March 23, AvtoVAZ announced that it is upgrading its aluminum casting and forging facilities to improve productivity, ensure consistent quality, and support future projects.
The company added that the equipment replacement plan is now in an active phase, with ten new casting machines purchased, some of which are

On March 20, AVTOVAZ JSC announced start of assembly of commercial and utility vehicles under the SKM brand. The first model, M7, will be offered as an all-metal van and a utility minivan. The new brand's models will share a production facility with commercial versions of the LADA Granta and NIVA and will be manufact

On March 18, AvtoVAZ announced that LADA Azimut engines have been tested for compliance with the Euro-6 emission standard as part of the process for obtaining state vehicle type approval.
The tests were carried out under strict conditions, including both high and low temperatures in a climatic chamber. The testing an

On March 17, AvtoVAZ JSC announced that it will spin off its commercial vehicles division into a separate business unit named “LADA Business.” 
The new entity will focus on expanding its presence in the light commercial vehicle segment and will provide a comprehensive range of solutions for corporate clients, includi

On February 27, AVTOVAZ launched production of the new-generation LADA Vesta Sport. It features a modified sports chassis and the most powerful engine in the LADA production lineup.
The LADA Vesta Sport has a more powerful engine, a stiffer sports suspension, and better brakes. The production follows a special two-s

On February 25, Avtovaz commissioned an automated wheel assembly and balancing line. It is supplying wheels to the LADA Vesta and LADA Iskra vehicles. The line is capable of handling wheels up to 22 inches in size. A wheel is assembled every 12 seconds, which is one and a half times faster than the previous equipment

On February 18, AVTOVAZ announced a large-scale upgrade of its welding production facility in preparation for serial production of the LADA Azimut crossover. The introduction of the new laser welding technology is aimed at enhancing body quality while maintaining structural strength.
For the first time, the LADA Azim

On February 11, Avtovaz announced that it had installed a high-precision gauge on its model's assembly line in preparation for the launch of LADA Azimut production. It will help to check the geometry of the exterior and interior parts.
The gauge is a master body sample, created based on a 3D model with an accuracy of

On January 29, State Scientific Center of the Russian Federation FSUE "NAMI" announced that its delegation visited Avtovaz and discussed cooperation in the development and modernization of powertrains, collaboration in bench and road testing, and the development and localization of production facilities for critical

AvtoVAZ, Russia produced 324,558 vehicles in 2025, plans 400,000 vehicles in 2026
On January 14, AvtoVAZ JSC summarized its 2025 production and sales results. The company produced 324,558 Lada vehicles during the year and introduced several new models and updates. The vehicle sales in Russia reached 351,390 units, gi

On December 8, AvtoVAZ announced that it had completed the fourth stage of its “Implementation of a Domestic System for Design and Technological Preparation of Production” project. The project is being implemented jointly with Top Systems.
During this stage, AvtoVAZ tested several new subsystem features, including "V

On December 4, Tavria, a textile supplier to the Russian auto industry, has begun industrial production of seat upholstery for Lada Iskra vehicles. The company has automated its upholstery cutting facility in Syzran, Samara Oblast region.
The total investment in the production development amounted to approx. RUB 22

On December 3, multiple sources reported that AvtoVAZ’s production plans for 2026 could rise to 400,000 vehicles, though final sales figures and inventory balance remain uncertain. The company is expected to announce the official production plan later.
Based on multiple sources

On November 26, the Federal Industrial Development Fund (IDF) announced that Penny Bereg (part of the Polad Group) has begun production of seat cushion sets for Lada Vesta and Lada Aura vehicles in Tolyatti. Total production capacity will be up to 150,000 sets per year.  Investment in the production facility totaled

On November 21, multiple sources reported that AvtoVAZ plans to sell 370,000 Lada vehicles in 2025, including exports. The company expects to sell around 350,000 units in the domestic market.
The company sold 459,000 vehicles in Russia in 2024. The 2025 forecast reflects a decrease of about 23%.
Based on multiple sou

On November 11, AVTOVAZ JSC announced the start of an intensive road-testing program for its upcoming flagship crossover, the LADA Azimut. The full-scale testing marks a key step in preparing the model for serial production in 2026.
The initial tests are being carried out on the plant’s own track for rapid tuning an