NTN Corporation

Company Profile

■URL

https://www.ntnglobal.com/en/index.html

■Address

1-3-17, Kyomachibori, Nishi-ku, Osaka-shi, Osaka-hu, 550-0003, Japan

Business Overview

-Manufactures and sells bearings, constant velocity joints, and precision equipment.

-Supplies its products and services to the automotive market, aftermarket, and industrial machinery market. Sales to the automotive industry accounted for 64.7% of the Company's overall revenue in FY ended March 2023.

-The Company has the largest share of the global hub bearing market and the second largest share of the global constant velocity joint market (according to the Company's own study). It places development focus also on products for electric vehicles.

Shareholders

-From April 2022, moved from the First Section of the Tokyo Stock Exchange to the Prime Market (As of Mar. 31, 2023)
Name or Company name Investment Ratio (%)
The Master Trust Bank of Japan, Ltd. (Trust account) 14.49
Custody Bank of Japan, Ltd. (Trust account) 4.86
Meiji Yasuda Life Insurance Company 4.01
NTN Kyoueikai 3.19
MUFG Bank, Ltd. 2.85
The Dai-ichi Life Insurance Company, Limited 2.62
NTN Employee Stock Ownership Plan 2.62
DFA INTL SMALL CAP VALUE PORTFOLIO 2.26
Nippon Life Insurance Company Ltd. 1.73
JPMorgan Securities Japan Co., Ltd. 1.56
Total 39.37

Products

Engine
Seals for variable valve timing control
Buttress thread type chain tensioners
Split-type Needle Roller Bearings for Engine support(Camshaft)
Built-in pulley auto tensioner units
Ball Screw Units for Continuously Variable Valve System


Drive Train
Driveshafts for front
Lightweight Driveshafts for rear
Constant velocity joints for steering systems
Monoblock tubular shafts
Electromagnetic mechanical clutch units
FA tapered roller bearings
Long life deep grooved ball bearings; TAB bearings
Auto air hubs
Spider for cross joints with shell type needle roller bearings
Constant velocity joints for propeller shafts
Constant velocity joints for half-shafts
Constant Velocity Joints for Driveshaft
Advanced Drive-Shaft Modules

Axle
BEAREE seal rings
Lead screws with plastic nuts
Long life deep grooved ball bearings; TAB bearings
FA tapered roller bearings
Tapered roller bearings
GEN 4 hub joints
GEN 3 hub bearings with integrated active ABS sensors
GEN 2 hub bearings
Super-lightweight GEN 3 hub bearings for mini-vehicles
GEN 1 Tapered roller unit bearings
GEN 3 orbital forming type hub bearings with magnetized encoders; for non-driven wheels
GEN 1 Angular unit bearings
GEN 3 hub bearings
GEN 3 orbital forming type hub bearings with magnetized encoder; for driven wheels
GEN 2 tapered roller hub bearing for heavy duty trucks
GEN 3 hub bearings with brake rotors
GEN2.5 Roller Bearings
Low friction hub bearing Ⅱ
Lightweight GEN3 hub bearings
Wide-range high-resolution small sensor integrated hub bearings
Advanced drive-shaft modules
Hub Bearings for Severe Environment

Transmission
MT
Compact clutch release bearings; CCR
Pull type clutch release bearings
Push type clutch release bearings
Filter sealed ball bearings
Cylindrical roller bearings with plastic retainer for high axial load use
Welded cage and roller type needle roller bearings
Needle roller bearings
Long life deep grooved ball bearings; TAB bearings
FA tapered roller bearings
4T, ET tapered roller bearings for differential gears
Needle Roller and Cage Assemblies for Idler Gear
Machined-ring Needle Roller Bearings for Shaft Support
Linear Ball Bearings for Shift Rod
Long Life Ball Screws
Ultra-low Friction Sealed Ball Bearings for automotive transmission
HK-F Type Drawn Cup Needle Roller Bearings


AT
Double-row thrust needle roller bearings for automatic transmissions
Flanged double row angular ball bearings
BEAREE seal rings
Thrust needle roller bearings
BEAREE seal rings, sleeves
Ball bearings
Needles for planetary gears
Unitized thrust needle roller bearings for irregular applications
4T, ET tapered roller bearings for differential gears
Machined-ring needle roller bearings
Thrust Roller Bearings for Eccentric Rotation (Low cross section type in radial direction)
Sprag Clutches for Stator of Torque Converter
ULTAGE Tapered Roller Bearings for Automotive Application
Minimized Cross Section Drawn Cup Needle Roller Bearings
Long-Life Series TAB Bearings
HK-F Type Drawn Cup Needle Roller Bearings
Low Friction Thrust Roller Bearings for Compressor

CVT
Needle roller bearings
Two-way clutch units
Ball bearings
FA tapered roller bearings
Machined-ring Needle Roller Bearings for Shaft Support
Needle Roller and Cage Assemblies for Planetary Gear
Long-Life Series TAB Bearings
ULTAGE Tapered Roller Bearings for Automotive Application
Thrust Roller Bearings for Eccentric Rotation (Low cross section type in radial direction)
Ultra-low Friction Sealed Ball Bearings for automotive transmission
BEAREE Seal Rings

Brake· Steering· Interior
BEARPHITE for wiper motors
Wipers; BEAREE coated
BEAREE for sunroofs
Miniature ball bearings for slide doors
Cageless needle roller bearings for seat slides
Deep Groove Ball Bearings for Seat Slide
Drawn-cup needle roller bearings for electrical seat reclining
Clutches for seat lifter
Mechanical Clutch Unit (MCU) for Next-generation Steering
Needle Roller Bearings for Antilock Brake System Pump
Ball Screw Drive Modules for Electric Hydraulic Brake
Thrust Roller Bearings for Electric Parking Brake

Accessory
BEAREE for distributors
Ball bearings for turbo chargers
Auto tensioner units for accessory drive belts
Pulleys for accessory drive belts
Long life ball bearings for alternators
Expansion compensating ball bearings for alternators
Ball bearings for electromagnetic clutches
BEAREE seal rings / Tip seals
Clutch integrated pulley units
Thrust needle roller bearings for compressors
Drawn cup needle roller bearings for compressors
Thrust needle roller bearings for compressors
Eccentric motion couplings for compressors; EM Couplings
Swash Plates for Compressor
Seals for Compressor
Drawn-cup needle roller bearings for throttle bodies
BEARPHITE for motors
Miniature ball bearings for motors
Ball bearings for fan clutches
Constant velocity joints for motor bus air conditioners
Traction drive type superchargers
High Density,High Strength Sintered Gears
Resin Sliding Bearings for Electromechanical Water Pump
Auto Tensioners with the Variable Damper Mechanism for ISG-Equipped Engine
Compact Clutch Integrated Pulleys
High-Temperature and Long-life Bearings for Alternator
Low Section High Strength Press Pulleys for Engine Accessory Belts
High Speed Rotation Ball Bearings for Pulley
Double Row Ball Bearings for Electromagnetic Clutch
BEARPHITE CL for Starter Motor

System for Electric vehicle (EV)
One motor type EV drive systems
In-wheel motor systems
Steering systems for Steer-by-wire
Electric motor and actuator
Electromechanical braking systems
Two Motor on-board Drive System
High Speed and Low Friction Deep Groove Ball Bearings for EV/HEV
Electric Variable Valve Timing Control
Electric Oil pump SP motor
Rear-wheel Independent Steering System
Electric Motor and Actuators Coaxial Hollow Shaft Type BⅢ
Electric Motor and Actuators Parallel Shaft Type BⅡ
Grease lubrication type high speed deep groove ball bearings for EV/HEV
Electromechanical brake system with parking brake
Brake /Clutch Control BⅢ
Electric Motor and Actuators Parallel Shaft Type BⅡ

History

Mar. 1918 Development and manufacturing of ball bearings started at the Nishizono Tekkojo Kuwana-gun Kuwana-cho in Mie Pref.
May 1923 Tomoe Syokai ties up with Nisizono Tekkojo, and both companies begin domestic manufacture and sales bearings, using NTN as a trademark.
Mar. 1976 The Enu Te Enu Hanbai Co. Ltd. is established (currently NTN Co. Ltd.).
Mar. 1927 The Company established the limited partnership NTN Seisakujo.
Mar. 1934 Company organization was changed from limited partnership NTN Seisakujo to limited company.
Jan. 1937 The Company name was changed to Toyo Bearing Mfg. Ltd..
Nov. 1971 The Company name was changed to NTN Toyo Bearing Co., Ltd..
Oct. 1989 Company name was changed to NTN Ltd. merged with Toyo Bearing Nagano Seisakujo.
Sep. 1996 The NTN-BCA Corp. is established in Lititz, USA.
May 1998 The NTN Manufacturing Co, Ltd. is established in Pluakdaeng, Thailand.
Dec. 1998 NTN Transmissions Europe was established in Allonnes, France.
Jun. 2000 The joint venture company established in France with Renault S.A. started production of constant velocity universal joints.
2000 Closed the Hirano factory (in Osaka) and subsequently acquired it. Also acquired NTN Sales and integrated it into the headquarters' sales division.
2000 Strengthened production bases in the United States, Europe, and Asia to meet the needs of globalization based on the four-pole system, that also includes Japan.
2001 Agreed to an all-inclusive tie-up with FAG (of Germany) in the bearings business.
Aug. 2002 Established Shanghai NTN Corporation in Shanghai, China.
Aug. 2002 Established NTN Nidec (Zhejiang) Corporation in Pinghu, China.
Sep. 2002 Established Guangzhou NTN-Yulon Drivetrain Co., Ltd. in Guangzhou, China.
Apr. 2004 Established NTN Mie Corporation in Kuwana-shi, Mie Pref. (It turned an affiliated company into a subsidiary, renaming it as NRT Mie.)
Aug. 2004 Established Changzhou NTN-Guangyang Corporation in Changzhou City, China.
Jul. 2005

Established NTN (China) Investment Corporation, in Shanghai, China.

Oct. 2005 Established NTN Manufacturing India Private Limited, in Rewari, India.
Nov. 2005 Established NTN-Nidec (Thailand) Co., Ltd., in Pluakdaeng, Thailand.
Dec. 2005 Established NTN Ina Corp. in Minowa, Nagano, Japan.
Apr. 2006 Invested in IFA-Antriebstechnik G.m.b.H. in Germany
Jul. 2006 Established NTN Fukuroi Corporation in Fukuroi City, Shizuoka Prefecture, Japan.
Feb. 2007 Established NTN-Rab changzhou Corporation in Changzhou City, China.
Mar. 2007 Invested in SNR Roulements in France.
Apr. 2008 Established NTN Houdatsushimizu Corp. in Hakui-gun, Ishikawa, Japan.
Made SNR Roulements its consolidated subsidiary.
Dec. 2010 Established NTN Noto Corporation in Shika-machi, Ishikawa Prefecture.
Jan. 2011 Established NTN-LYC (Luoyang) Bearing Corporation in Luoyang, China.
Oct. 2011 Established Nanjing NTN Corporation in Nanjing, China.
Apr. 2013 Established NTN Manufacturing de Mexico, S.A. DE C.V. in Aguascalientes, Mexico.
Jan. 2014 Established Xiangyang NTN-Yulon Drivetrain Co,. Ltd. in Xiangyang, China.
Jul. 2015 Established NTN Driveshaft Anderson, Inc. in Anderson, U.S.
Dec. 2015 Nippon Kagaku Yakin Co., Ltd. absorbed NTN Powder Metal Corporation, and changed the company name to NTN Advanced Materials Corporation.
Apr. 2018 Changed the name of NTN Bearing Service Co., Ltd. to NTN Sales Japan Co., Ltd
Oct. 2018 Absorbed the operations of three consolidated subsidiaries (NTN Kongo Corporation; NTN Mikumo Corporation, and NTN Precision Plastics Corporation), forming Industrial Equipment Business Kongo Corporation; Automotive Business: Mikumo Corporation; and Compound Materials/Products Business: Precision Plastics Corporation, respectively.
May 2019 Signed an agreement with PT. Inti Ganda Perdana (IGP) of the Astra Group, to establish a joint-venture production plant to manufacture constant-velocity joints, at the KIM Industrial Park in Karawang located in eastern Java Island.
Jun. 2021 Turned Taira Forging into a consolidated subsidiary.
Jul. 2021 Established NTN Europe Holdings SAS in Annecy, France.
Apr. 2022 Moved to the Prime Market of the Tokyo Stock Exchange.
Mar. 2023 Changed name of NTN-SNR Roulements S.A. in France, to NTN Europe S.A.

Supplemental Information 1