Archives of Past Exhibits:Hitachi Metals
Tokyo Motor Show 2015
Ceatec Japan 2015
2015 JSAE Automotive Engineering Exposition
HERCUNITE heat-resistant cast components

SAE 2015 World Congress
Ceatec Japan 2015
2014 JSAE Automotive Engineering Exposition
High-Toughness Ductile Iron Castings"NMS600CM"

High-Toughness Ductile Iron Castings"NMS600CM"

SAE 2014 World Congress
Soft magnets and cut cores

TOKYO Motor Show 2013
Enameled Wires for EV/HEV Inverter-Fed Motors | Nd-Fe-B Sintered Magnets | ||
![]() |
The straight angle enameled wires inhibit the dielectric breakdown by partial discharge. | ![]() |
|
image | ![]() |
image | ![]() |
High-Performance Ferrite Magnets | Cladding Materials for Battery Electrode Connection | ||
![]() |
![]() |
||
image | ![]() |
image | ![]() |
FINEMET F3CC Series for High Frequency Transformers | Hybrid Core Type Reactor | ||
![]() |
![]() |
||
image | ![]() |
image | ![]() |
Fashionable Aluminum Road Wheels | Support Beam | ||
![]() |
![]() |
||
image | ![]() |
image |
Crankshaft | Die Steel for Die-Casting | ||
![]() |
![]() |
||
image | image | ![]() |
Aluminum Battery Cases | Heat-Resistant Cast Components | ||
![]() |
![]() |
||
image | ![]() |
image |
CEATEC 2013
Product lineup of Hitachi Metals | Nd-Fe-B Sintered Magnets for Hybrid System | ||
![]() |
![]() |
![]() |
|
image image image |
image |
High-Grade Speciality Steel Engine Materials and Parts | Magnets for use in electric motors | ||
![]() |
![]() ![]() |
![]() |
![]() ![]() |
image image image |
image image image |
Enameled wires for EV/HEV inverter-fed motors | Maniturbo | ||
![]() |
![]() |
![]() |
Integrated exhaust manifold and turbine housing |
image image | image image |
Battery case for EV | Ductile Iron Castings | ||
![]() |
![]() |
![]() |
![]() ![]() |
image | image |
"SCUBA" Fashionable Aluminium Road Wheel | Die Steel for Die-Casting | ||
![]() |
![]() |
![]() |
![]() |
Plastic Mold Steel | Cold Work Tool Steel | ||
![]() |
![]() |
![]() |
![]() |
Soft magnetic material products for EV/PHEV | Core for High Frequency Transformers | ||
![]() |
![]() |
![]() |
|
image image image |
Hybrid core type reactor | |||
![]() |
![]() |
JSAE 2013
Hitachi Metals
Hitachi Cable
Aluminium Battery Case | Heat-Resistant Cast Components | ||
![]() |
![]() |
![]() |
![]() ![]() |
image |
Lost-Wax Precision Castings | CVT Belt Materials | ||
![]() |
![]() |
![]() |
![]() |
image image |
NEOMAX Series Nd-Fe-B Sintered Magnets | Ferrite Magnets | ||
![]() |
![]() |
![]() |
![]() |
image image image |
image image |
Cladding Materials for Battery Electrode Connection | |||
![]() |
![]() |
Soft Magnetic Material Products for EV/PHEV (panel) | ![]() |
image |
"FINEMET" CMC Coil / Core | "HIDUST" Normal Mode Choke Coil | ||
![]() |
![]() |
DC-DC Transformer for Down Converter (panel) | ![]() |
Transformer for Distributed Power Supply in IGBT Drive Board "HFTR2DA" (panel) | ![]() |
"FINEMET" FT-N Series for Large Common Mode Current | "FINEMET" Core for ZCT | ||
![]() |
![]() |
"FINEMET" F3CC Series for High Frequency Transformers | Hybrid Core Type Reactor | ||
![]() |
![]() |
![]() |
![]() |
image |
Cold Work Tool Steel | Plastic Mold Steel | ||
![]() |
![]() |
![]() |
![]() |
image | image image |
Die Steel for Die-Casting | "SCUBA" Fashionable Aluminium Road Wheel | ||
![]() |
![]() |
![]() |
![]() |
image | image |
High-Toughness Ductile Iron Castings | |||
![]() |
![]() |
||
image image image |
Hitachi Cable
High Voltage Compact Connector | PTFE Hose Reinforced with Stainless Braiding | ||
![]() |
![]() ![]() |
![]() |
![]() ![]() |
Enameled Wires for EV/HEV Inverter-Fed Motors | |||
![]() |
![]() ![]() |
||
image image image |
JSAE 2012
Maniturbo | Turbine Wheels | ||
![]() |
![]() |
High-Toughness Ductile Iron Castings | Fashionable Aluminum Road Wheels | ||
![]() |
![]() |
Die Steel for Die-Casting | Plastic Mold Steel | ||
![]() |
![]() |
Cold Work Tool Steel | CVT Belt Materials | ||
![]() |
![]() |
![]() ![]() |
|
image |
Sintered Ferrite Magnets | Nd-Fe-B Sintered Magnets | ||
![]() |
![]() ![]() |
![]() |
![]() |
Cladding Materials for Battery Electrode Connection | Aluminum Battery Cases for EV | ||
![]() |
![]() |
![]() |
![]() |
Choke Coils & Cores | Hybrid core type reactor | ||
![]() |
![]() |
High Frequency Transformers | |||
![]() |
2011 TOKYO motor show
Die Cast Tool Steel | Plastic Mold Steel | ||
![]() |
Introduced Products: Cylinder Block (Provided by RYOBI) |
![]() |
Introduced Products: Motor Cover for Electric Vehicle (Provided by RYOBI) |
![]() |
Plastic Mold Steel | Cold Work Tool Steel | ||
![]() |
Introduced Products: Head Lamp |
![]() |
Introduced Products: Center Pillar (Provided by UNIPRES) |
![]() |
![]() ![]() |
High-Toughness Ductile Iron Castings | Fashionable Aluminum Road Wheels | ||
![]() |
![]() |
![]() |
![]() |
image |
Heat-resistant Cast Components | Aluminum Battery Cases for EV | ||
![]() |
![]() |
![]() |
|
image | image image |
Cladding Materials for Battery Electrode Connection | Sintered Ferrite Magnets | ||
![]() |
![]() |
![]() |
![]() |
image |
Nd-Fe-B Sintered Magnets | Core for High Frequency Transformers | ||
![]() |
![]() |
![]() |
![]() |
Common Mode Choke Coils | Amorphous Cut Cores for Power Chokes | ||
![]() |
![]() |
![]() |
![]() |
image |
CVT Belt Materials | |||
![]() |
![]() |
2011 JSAE Automotive Engineering Exposition
Automotive related products of Hitachi Metals Group |
Engine Parts of Hitachi Metals | ||
![]() |
|
![]() |
![]() |
Ni Amorphous Material | Diesel Particulate filter | ||
![]() |
![]() |
||
Image | Image |
CVT Belt Materials |
Shunt Resistor Material for Rechargeable Battery |
||
![]() |
![]() |
![]() |
|
Image |
Cladding alloys | Cut Cores | ||
![]() |
![]() |
Common Mode Chokes Coils | Ferrite Magnets | ||
![]() |
![]() |
||
Image | Image | ||
Image |
Nd-Fe-B Magnets | |||
![]() |
|||
Image | |||
Image | |||
Image | |||
2010 JSAE
NEOMAX(R) | |||
---|---|---|---|
![]() |
![]() |
||
Image Image Image(Generator) Image(Generator) Image(Motor) Image(Motor) |
Installed in the Toyota Estima Hybrid |
Image Image Image Image Image Image Image |
|
![]() |
|||
Image Image |
|||
NMF(R)-12 | Low frequency antennas using amorphous laminated core |
||
---|---|---|---|
![]() |
![]() |
![]() ![]() |
|
Image Image Image |
Image Image Image |
||
OBC series | |||
---|---|---|---|
![]() |
|||
Image Image Image |
Image Image Image |
2009 Tokyo Motor Show
2009 TOKYO Motor Show
NEOMAX(R) | |||
---|---|---|---|
![]() |
Image 1 Image 2(Motor) Image 3(Motor) |
Image 4(Generator) Image 5(Generator) |
|
Installed in the Estima Hybrid |
2005 Tokyo Motor Show
■Exhaust Line Components and Materials
-HERCUNITE® Series Heat-Resistant Cast Steel/Iron Components
These components are used in exhaust-related products such as exhaust manifolds
and turbine housings. They are able to withstand the high temperatures associated with engine combustion. In addition, they contribute to improving fuel consumption and cleaning emission gas. They are installed in the Volvo S60, S80 and XC90.
-CERACAT(R) filter for cleaning emission gas
This is a ceramic filter for removing soot discharged from diesel vehicles. This large-sized, single-unit filter is capably of trapping a high percentage of micro soot particles, in the order of 10 nm, and also reducing pressure loss through sophisticated control of the shape, size and distribution of pores. It is installed in the Hino Profia.
■Aluminum Wheels
-SCUBA™: Large-Caliber Aluminum Wheels Featuring Sophisticated Design
By making optimum use of CAE technology, the Company was able to create these wheels that not only feature a more sophisticated design but also are lighter in weight. The design enables a minimum draft of 3.5 degrees and a minimum wall thickness of 3.0 mm. They are being installed in the Mazda RX-8 and the Subaru Legacy.
-LUSTERIC® Series
The coating provides a chrome-plated finish without the use of harmful substances. This new coating offers a more sophisticated metallic feel and look with sharper and deeper shading compared to that given by conventional silver paint. It is being used on the MAZDA Roadster (limited edition).
-HERCUNITE® Series Heat-Resistant Cast Steel/Iron Components
These components are used in exhaust-related products such as exhaust manifolds
and turbine housings. They are able to withstand the high temperatures associated with engine combustion. In addition, they contribute to improving fuel consumption and cleaning emission gas. They are installed in the Volvo S60, S80 and XC90.
-CERACAT(R) filter for cleaning emission gas
This is a ceramic filter for removing soot discharged from diesel vehicles. This large-sized, single-unit filter is capably of trapping a high percentage of micro soot particles, in the order of 10 nm, and also reducing pressure loss through sophisticated control of the shape, size and distribution of pores. It is installed in the Hino Profia.
■Aluminum Wheels
-SCUBA™: Large-Caliber Aluminum Wheels Featuring Sophisticated Design
By making optimum use of CAE technology, the Company was able to create these wheels that not only feature a more sophisticated design but also are lighter in weight. The design enables a minimum draft of 3.5 degrees and a minimum wall thickness of 3.0 mm. They are being installed in the Mazda RX-8 and the Subaru Legacy.
-LUSTERIC® Series
The coating provides a chrome-plated finish without the use of harmful substances. This new coating offers a more sophisticated metallic feel and look with sharper and deeper shading compared to that given by conventional silver paint. It is being used on the MAZDA Roadster (limited edition).