Archives of Past Exhibits:Sumitomo Electric Industries

2018 International Suppliers Fair

Wire Harness of Audi A6

-These Exhibits include other Sumitomo Groups' products

Flexible Flat Cable (FFC)

Flexible Printed Circuits (FPC)

48V DC/DC Converter

Coil-on-Plug parts for VW

12 mm Sak Terminal System

Tokyo Motor Show 2017

Products Lineup

2017 JSAE Automotive Engineering Exposition

Products Lineup 1

Products Lineup 2

Damper Brace

Sumitomo Riko

Low Gravity EPDM Water Hose for Automotive

Sumitomo Riko

SmartRubber for Drive Monitoring

Sumitomo Riko

Power supply module for high voltage

DC/DC converter in energy regeneration system

Automotive World 2017

Sintered ZnS Far-infrared Lenses for Night Vision

-Sumitomo Electric Industries, Ltd. / CBC Co., Ltd. -Sumitomo Electric Industries, Ltd. (Manufacturing, Development)

Sintered ZnS Far-infrared Lenses for Night Vision

-Night Vision ADAS Automotive Application

Sintered ZnS Far-infrared Lenses for Night Vision

2016 JSAE Automotive Engineering Exposition

Magnesium alloy (AZ91) pressed parts

-New product
-Magnesium is the metal which is about 30% lighter than aluminum, about 70% lighter than iron.
-AZ91 sheet has superior specific strength and specific flexural rigidity to any other metals. Sumitomo is the world first to have developed rolling plate of AZ91.

High performance powder metal parts

Demonstration car (1)

Demonstration car (2)

Tokyo Motor Show 2015

Product lineup

Battery wiring module

Wiring harnesses based on aluminium wires

Weight comparison with copper wires

DC/DC converter

Push and smart entry integrated BCM

Standard connectors

Connectors for electronic control unit

Advanced infrared beacon

Next generation central gateway

Automotive high speed LAN

2015 JSAE Automotive Engineering Exposition

Product Lineup of Sumitomo Electric Group

-Power Control Unit

-Instrument Panel Wiring Harness -Magnesium Alloy Steering Wheel Switch Bezel

-Battery Wiring Module for HEV -Bi-directional On-board Charger -PLC Unit for Charging System

-High-speed Optical LAN

High Voltage Cable for HEV

Installed vehicle: Honda "Insight", Nissan "Pathfinder" for North America Product of Sumitomo Wiring Systems

Battery Wiring Module for HEV

Installed vehicle: Honda "Accord Hybrid" Product of Sumitomo Wiring Systems

DC/DC Converter in Energy Regeneration System

Product of Sumitomo Wiring Systems

"Cell Gasket" New Rubber Seal Component

Installed vehicle: Toyota "MIRAI" Product of Sumitomo Riko

Wiring Harnesses Based on Aluminium Wires

Installed vehicle: Toyota "Ractis", "Alphard" Product of Sumitomo Wiring Systems

Small Waterproof Connectors and High-Frequency Connectors

-Produces high frequency connector HFC III for Toyota. Product of Sumitomo Wiring Systems

Heat Dissipation Sound-absorbing Material

Product of Sumitomo Riko

Weight Reduction of AVS Products

Installed vehicle: (Upper right) Honda "Brio" in India (Left) Honda Fit Product of Sumitomo Riko

Development of Module Hose

Product of Sumitomo Riko

High Performance Powder Metal Parts

Product of Sumitomo Electric Industries

BCM Integrated Smart Entry Function

Installed vehicle: Suzuki "Spacia", Daihatsu "Move", Honda "N-Box", "Accord" Product of Sumitomo Wiring Systems

Automotive Wiring Harness for high-speed data transmission

-Developing for Ethernet Product of Sumitomo Wiring Systems

Central Gateway Concept to Next Generation

Product of Sumitomo Wiring Systems

-for CAN/CAN-FD

Smart Rubber for Occupants Monitoring

Product of Sumitomo Riko

2014 JSAE Automotive Engineering Exposition in NAGOYA

Battery wiring module for HEV

Installed Vehicle： Honda "Accord Hybrid"

DC/DC converter in energy regeneration system

Connectors

High performance powder metal

Weight reduction of AVS products

Development of module hose

Smart Rubber Technology for steering

Central gateway concept

BCM equipped with smart entry function

Development of automotive high-speed optical LAN

Wiring harnesses based on Aluminium wires

Needs for Vehicles and Sumitomo Electric Group's Activity

2014 ITS WORLD CONGRESS

ITS infrastructure devices

High-Speed Optical LAN for vehicles

-Development of a LAN to quickly transmit high quality images from cameras.

Millimeter radar

-Radar which distinguishes between pedestrians and vehicles through difference in Doppler spectrum (pedestrians tend to exhibit a variety of movements in their arms and legs when walking, while vehicles tend to move as a singular body.)

PLC-ECU for charging systems

-Controls battery charging and discharging for electric vehicles such that vehicles are charging during non-peak hours, thus preventing the electrical grid from being overloaded.

2014 JSAE Automotive Engineering Exposition

PHEV/EV Charging Connector

EVSE Side Connector (Combined Charging System) DC quick charger model

PHEV/EV Charging Connector

EVSE Side Connector (CHAdeMO) DC quick charger model

ITS Antenna

The product is produced by Sumitomo Electric System Solutions.

High Performance Powder Metal

Ni-free Clutch Hub

High Performance Powder Metal

Choke Coil with Lower Loss

High Performance Powder Metal

High Efficient Oil Pump Rotors

Tokyo Motor Show 2013

HEMS (Home Energy Management System) Gateway

AC Charging Connector (Inlet & Gun)

Wireless Charging System

Bi-directional On-board Charger and PLC Unit for Charging system (Inband)

Battery Wiring Module

Installed vehicle: Honda "Accord Hybrid"

High Voltage Junction Block

High Voltage Cable for Hybrid car

High Voltage Cables with Aluminum Pipe

Automotive High-speed Optical LAN & High Frequency Connector HFCIII

Parts using Mg alloy

-Magnesium Alloy Steering Wheel Switch Bezel -Magnesium Alloy Shift Knob

Camera ECU, Central Gateway

-Camera ECU -Drive Link -Central Gateway -Optical Harness

Next Generation Central Gateway

-Mass-production in 2017

Reactor (Under development)

-Light weight, High functionality

Cassette Block Structure Relay Box

Motor Side Connector

Engine Room Wire Harness

Wiring Harnesses based on Aluminium Wires

-Global share of Wire Harnesses (General) 25% -Customers：Japanese OEMs, Volkswagen -Competitor： Delphi

PHEV/EV Charging Connector

12V Cooperative System utilizing 700MHz ITS band

2013 ITS WORLD CONGRESS

Product lineup of Sumitomo Electric Group

Battery Wiring Module for HEV

Installed Vehicle： Honda "Accord Hybrid"

Automotive High-speed Optical LAN

Wiring Harnesses Based on Aluminium Wires

Coil Unit for Wireless Charging System (Receiving Coil)

Bi-directional On-board Charger for PHEV/EV

PLC-ECU for PHEV/EV Charging System

Next Generation Central Gateway

2013 JSAE Automotive Engineering Exposition

Product lineup of Sumitomo Electric Group

Rectangular wire (utilized in reactor)

EV charger connector (CHAdeMO conformity)

High performance powder metal parts

Aluminum cylinder liner

High efficient oil pump rotor "Parachoid"

High efficient oil pump rotor "Megafloid"

High efficient oil pump rotor "Geocloid"

Core for reactor

Choke coil with lower loss

Home Energy Management System

Telematics service at Cloud

V2I cooperative system utilizing 700MHz ITS band

JSAE 2012

Product lineup of Sumitomo Electric Group		Reactor

image image image image image image

PLC unit for PHEV/EV charging system

image image

<Aluminum products>
High-strength aluminum alloy material A6056 for fastener		Brake piston

		image

AT spool valve for automobile		Master cylinder piston

image		image

Bearing for seat belt		Brake hose clip

European standard 6056 aluminum alloy bolt		Micro gas generator parts

Aluminum parts for anti-vibration rubber

Aluminum parts for anti-vibration rubber		High strength complicated shape clutch hub

Turbine hub AT		High efficient oil pump rotor

Planetary carrier for CVT		Thin walled planetary carrier for 4WD transfer system

Variable valve timing control component		High efficient oil pump rotor

Visualization of electricity consumption		SEI's telematics for environmentally friendly future

-Micro smart-grid demonstration system / Demonstrating megawatt-class -Power generation/Storage system

Tokyo Motor Show 2011

PHEV/EV Charging stand		Product lineup of Sumitomo Electric Group

Power distributor		Starter sub cord

Engine harness		Center cluster module

9.5 Type connector for inverter (Lever type)		Small size joint connector

Sub junction block		Grommet

		image

JSAE 2011

PLC unit for PHEV/EV charging system		Reactor using powder core for automobiles

Image		Image

Choke coil cores for power supply devices

Image

Ingenious power system

Gallium Nitride (GaN) semiconductor substrate

Superconductor

Highly scratch resistant magnet wire

Powder metal parts

-Cylinder liner, Bearing cap		-Variable valve timing control components

Image		Image

Aluminium products

JSAE 2010

Porous metal celmet (R)		Aluminium products

Image Image Image	Used for the Toyota Prius, SAI, Lexus	Image (Tie rod end) Image (Brake piston) Image (Anti-vibration rubber) Image	Image (Master cylinder piston) Image (Bolt used for car (6056)) Image (Micro gas generator parts) Image (A/T spool valve)

Powder metal parts

Image (Oil pumps rotors for hybrid vehicle) Image (Sprocket) Image (Sprocket) Image (Sprocket)	Image (Cycloid decelerator for electric motor-driven VCT systems) Image (Multi stepped and fan shaped gear with male screw) Image (Variable valve timing control components)	Image (Stainless vacuum pump components for electric vehicle) Image (Soft-magnetic material components) Image (Cylinder liner) Image (Turbine hub AT)	Image (Thin walled planetary carrier for 4WD transfer system) Image (Sintered high speed steel vane by sinter hardening technique) Image (Part with complicated shape for seat belt buckles)

Sintered-ZnS lenses for far-infrared cameras	Heat resistant tubing IRRAX(R) tube, heat shrinkable tubing SUMITUBE(R), low-friction parts TERALINK(R)

Image	Image (TERALINK) Image (TERALINK)	Image (SUMITUBE I) Image (SUMITUBE SA2) Image (IRRAXTUBE ER2)

Highly scratch resistant magnet wire		Reactor using powder core for automobiles

Image (Highly scratch resistant magnet wire ) Image (Drive motor for hybrid vehicles) Image (Compressor motor for air conditioners) Image (Radiator fan motor) Image (Radiator fan motor)		Image Image Image

2009 Tokyo motor show


	Image

Starter sub cord		Sintered ZnS IR lens
	Image		Image

Engine harness		Crank rotation angle sensor built-in connector
	Image 1 Image 2		Image 1 Image 2 Image 3

Engine cover		Heat spreader for power module
	Image		Image

Shielded high-voltage harness for HEV		Variable valve timing control components
	Image		Image 1 Image 2

Front camera		Connector for mm wave radar
	Image		Image 1 Image 2

Module connector/ Multi-pole & light insertion connector		Connector for automatic transmission
	Image		Image

Grommet		Connector for electric power steering
	Image		Image 1 Image 2

Sub junction block		High voltage shielded wire
	Image		Image

Flexible flat cable connector for automobile		FFC for steering switch
	Image		Image

Wiring harness unit for sliding door applications		Porous metal for HEV batteries
	Image 1 Image 2		Image 1 Image 2

Fuel tank relay connector		Super-low penetration multilayer plastic tube
	Image		Image 1 Image 2

Low permeation hoses for fuel tank assembly		Small size joint connector
	Image		Image 1 Image 2

Aluminum suspension arm		Strut mount
	Image		Image

Lamp socket unit connector		Shielded flat cable for RSE
	Image 1 Image 2		Image

Magnet wire for HEV
	Image 1 Image 2

Porous metal CELMET

JSAE 2009

Sintered-ZnS Lenses for Far-infrared Cameras	Superconducting Motor for Automobiles

Image	Image

Highly Scratch Resistant Magnet Wire
-Scrape-resistance Winding Wire Class 1 UTZ 1.0mm	-Drive Motor for Hybrid Vehicles : Rectangular Wire

Image	Image	Image
		Used for the Honda Insight

-Alternator : Rectangular Wire	-Compressor Motor for Air Conditioners : Scrape-resistance Winding Wire

Image	Image

Reactor Using Powder Core for Automobiles	Powder Metal Parts

Image	Image

JSAE 2008

A wide range of automobile related technologies are exhibited by category based on wirings and onboard devices and parts.


Zinc Sulfide Lenses for Far-infrared Cameras
		Image


Powder Metal Parts		Teralink
	(New technology)
Image		Image
Image (Highly efficient P/M internal gear pump rotors)

Heat resistance tubing/Heat shrinkable tubing

Image

Low Voltage Automobile Cable
		Image (Sensor Cable For Antilock Brake System) Image (Wiring Harness for Car Cell Phone) Image (SUMI-CARD Flat Cable)

JSAE 2007

Zinc Sulfide Lens Module for Far Infrared Camera
		Image 1 Image 2

Tokyo Motor Show 2005

Camera System Based on IEEE 1394
- This system, based on the IEEE 1394 Standard, consists of a network for automotive applications. It uses multiple cameras that monitor the exterior areas of vehicles. It controls the bandwidth of the video streams transmitted from these cameras, regulating the connection between the camera and the displays. This systems is the first of its kind in the world.

Automotive Flat Harness
SUMI-CARD
This harness is used in Air Conditioner Switches, Steering Cables for Airbags, Steering Switches, and Car Navigation Systems. The Company is supplying them primarily to Toyota Motor.
It weighs less than round harnesses.

Frame-Lead
繝ｻThis frame-lead, which can be mounted at the same time along with IC chip components, is mainly used to connect circuit boards. It is currently being used in key-sensors installed on Mercedes Benz vehicles.

Wheel Speed Sensor
The semiconductor-type SAS-3 has been made not only more compact but also lighter in weight (10g). Its exterior construction is molded entirely of plastic.

Tokyo Motor Show 2004

Exhibited Products

Camera System with Automotive IEEE1394 Network

This system employs a band-width control function of the video streams of several cameras for monitoring outside of vehicle with Automotive Network based on IEEE1394, and the management function of the connection between cameras and display devices.

Flat Cable

Cockpit Module
-SUMI-CARD for Car Navigation System
-SUMI-CARD for Air-Conditioner Switch
-Extruded LEAD for Meter
-Steering Cable for Air Bag

Roof Module

Steering Module
-SUMI-CARD for Steering Switch

Door Module

<Features>
-Connects easily with many conductors
-Good flexing property
-Weight saving
-Space saving

TAB-LEAD for Secondary Cell

<Features>
-Prevention of short between lead conductor and film metal (Bilayer insulation composed by cross-linked layer and adhesive layer)
-Seal performance (Sealing reliability of Film resin / Insulator / Conductor)
-Resistance to corrosion
-Small conductor resistance

Heat Adhesion Type ABS Sensor Cable

The main particularity of this cable is that it has an outer sheath that thermally adheres to polyamide and polyester resin. When heat adhesion type ABS sensor cable is used, the conventionally required waterproof sealing member becomes redundant. This simplifies and shortens the process of connecting with a sensor, and at the same time improves the waterproof property.