Teardown Analysis of Tesla Cybertruck

Overview

Cybertruck is an electric pickup truck sold by Tesla, adopting distinctive systems such as steer-by-wire, brake-by-wire, rear-wheel steering system, 48V low-voltage network, and 800V charging system.
Additionally, it is a model that fully incorporates a zonal E/E (electrical/electronic) architecture.
Munro & Associates, Inc. was one of the first to purchase and conduct a teardown study, and create a benchmark report.

Teardown Vehicle

2024 Cybertruck Cyberbeast
0-60 mph acceleration time: 2.6 seconds
AWD, equipped with three drive motors.
Battery capacity: 123kWh
320 miles (Approx. 515 km) driving range in EPA mode

Data Summary, Prices

Teardown Analysis Report: $150,000 USD
This report contains the full content of Chapters 1 to 4.
Chapter 1 Battery Pack & Cooling: $75,000 USD
Chapter 2 Front & Rear Motor, Inverter and Gearbox: $70,000 USD
Chapter 3 Suspension & Mega Casting: $50,000 USD
Chapter 4 Electrical & Electronic (E/E) Report: $100,000 USD

Each chapter contains the following features.

Vehicle Overview
Eye-Catching Features
Cost analysis of key components in each chapter

The contents of each chapter are described below.

Corporate members can download the sample report after logging in.

Chapter 1 Battery Pack & Cooling

Chapter 1 is composed of the following content.

Battery pack components: Battery characteristics, Pack assembly, Thermal management, Battery management system
Technical descriptions: Battery heating and cooling system, Cabin temperature control, Electronics cooling loop
Battery cell details: Cell construction, Electrical performance analysis, Chemical analysis

Chapter 2 Front & Rear Motor, Inverter and Gearbox

Chapter 2 is composed of the following content.

Drive Motors, Inverters, Gear Boxes, Housings, and motor technical details.
Specification, Dimensions, and Construction
Motor technical information relating to dimensions, design and construction strategies, magnet orientation, laminates, and mounting.

Chapter 3 Suspension & Mega Casting

Chapter 3 is composed of the following content.

Front & Rear Suspensions and Body Castings including Front & Rear EDM (Electric Motors and Gear Boxes), Knuckles, Steering Rack and more.
Steer-by-Wire architecture, operation, safety and performance features.
Technical descriptions for rear wheel steer components, operation.

Chapter 4 Electrical & Electronic (E/E) Report

Chapter 4 consists of the vehicle’s entire electrical system including part materials, suppliers (as available), weights, and photographs.
Chapter 4 includes:

Communication networks: Ethernet, CAN, etc. and Antennas
ECU Summary: Autopilot + MCU/Gateway, Telematics, Body, Trailer and Door Controllers
Power Distribution: High/Mid/Low Voltage, Wire Harnesses & Connectors, 800V Charging System
Systems & Relevant Components: Diagnostics, Steer-by-Wire, Powertrain, Autopilot/Driver Assistance, Infotainment, Lighting, etc.

LEGAL DISCLAIMERS & SALES CONDITION (Disclaimer and FAQ regarding Terms & Conditions)

Q1: Can I see a sample report before purchasing?

A1: Please contact a MarkLines representative, so that MarkLines may provide you with sample information in digital PDF format, or to answer any other questions that you may have regarding the report.
(Note: critical data will be hidden in the sample.)

Q2: After purchasing this report, am I authorized to photograph, distribute, copy, or fax all or portions of the reports?

A2: It is permissible to distribute copies of this report only internally within your company.
If you intend to distribute the information outside of your company’s organization by hard copies or fax, please contact MarkLines before doing so. MarkLines will then negotiate with Munro & Associates, Inc. to receive their written permission on your behalf as these reports are protected by law.
Distribution without express written permission is legally prohibited.