tal TFT display panel Full-color 7-inch TFT cluster Full-color 7-inch TFT cluster Instrument panels 12.3-inch fully HD virtual cluster Micro Controller Unit (MCU) for instrument cluster (via Denso) Flash memory for instrument cluster (via Denso) Instrument & Head-up Display Bio-enginering plastic DURABIO for meter cover Instrument cluster MLBEvo 7-inch TFT 1.5T 1.6L 1.0T 2.0T 1.8T 2.0L 2.5L 1.5L 1.3T 1.8L 7DCT 6AT 6MT 6AMT 5MT 6DCT E-CVT 9AT ...

Who Supplies Whom  Updated at: 2025/06/06

mystic illumination Instrument Panel topper pad Steering wheel control panel Instrument panel member Complete center stack Cockpit and console Instrument panel trim parts (Aluminium) Center stack control panel [Electronic] Instrument panel member assembly Cluster panel Bio-based engineering plastic Durabio for instrument panel Sub-instrument panel Instrument panel cover Instrument panel (surface material) Instrument panel foam Instrument panel fa...

Who Supplies Whom  Updated at: 2025/06/04

cle stability control ECU Transmission ECU Air conditioner ECU Brake cable Air duct Hood liner Manual transmission bearing A/C compressor bearing Air charged air cooler Grivory HT2V-3H glass fiber reinforced engineering thermoplastic material for air duct with resonato Bumper Bio-enginering plastic DURABIO for meter cover Engine ECU Ignition ECU Gateway ECU Body ECU Brake booster Brake master cylinder Front radar sensor High-mounted stop lamp Air...

Who Supplies Whom  Updated at: 2025/05/19

cupholder Dual cup holder Center console rear cupholder Front center console cupholder Cup holder cover Cup holder rotary damper Cupholder Rear armrest cupholder Cupholder rotary damper Cup holder (via Calsonic Kansei) Rear armrest cupholder damper Rear seat cup holder Bio-based engineering plastic Durabio for cup holder bezel Cup holder damper (Tier 2) 1.2L 1.0T 5MT Matikon GmbH & Co. KG (Formerly fischer automotive systems GmbH & Co. KG) Cult...

Who Supplies Whom  Updated at: 2025/03/10

by Ultra-fine acrylic fiber "XAI" New unpainted interior and exterior parts Material for 3D Decolation Firm Grass Fiber Reinforced Polypropylene for Automotive Parts Lupion (K series) Reinforeced Polycarbonated/Polyester alloy New Material for Foam Injection Molding Bio-based Engineering Plastics "DURABIO" for exterior decorative parts and radar cover Micro-diffusion PMMA ACRYPET™ Slush PVC for IP skin Lightweight underbody shield LWRT GMT/GMT...

Search Suppliers  Updated at: 2025/02/13

10% CNF reinforced resin   Motorcycle windscreen made from bio-based plastic (Honda)   The exhibition booth of Honda Motor Co., Ltd. (Honda) featured a motorcycle windscreen made of bio-based plastic.   The motorcycle windscreen made from bio-based plastic is made from an engineering plastic (DURABIO™) derived from bio sources (inedible corn), and is highly weather-resistant and scratch-resistant. The forming method is injection molding, ...

Market & Tech Reports  Updated at: 2024/06/26

which can be implemented in the short term.   (Exhibitor profile) Company Exhibited products Material Construction method (Process) Mitsubishi Chemical Corporation(Chiyoda Ward, Tokyo) In production: Front grilleMazda CX-60In production: Meter garnishSuzuki Jimny Bio-based engineering plastic"DURABIO™"Plant-derived PC resin Injection molding Paint-less resin outer panel(reference product) Recycled PMMA "Acrypet" tail lamp recycling mate...

Market & Tech Reports  Updated at: 2024/06/18

ept vehicle Weather Strip Airbag Bracket/Cover Airbag Cover Concept Vehicle Proposal to eliminate paiting for interior decorative parts Proposal for exterior decorative parts and radar cover Lightweight for automobile applications using Prepreg Compression Molding technology Intake grille made with DURABIO™ material Intertior applications of DURABIO™ High abrasion resistance polycarbonate material lupilon®K Interior parts made with TPE Black...

Search Suppliers  Updated at: 2024/02/09

: Biomass PPProcess: Injection molding Hood inner made of environmental materials Material: Thermosetting biomass SMCProcess: Hot press Mitsubishi Chemical Corporation(Chiyoda Ward, Tokyo, Japan) Mass production: Front grille(Mazda CX-60) Material: Plant-derived PCBio-based engineering plastic "DURABIO"Process: Injection molding Mass production: Tail lamp cover made of recycled materials(Honda Motor Co., Ltd., Stanley Electric Co., Ltd.) Ma...

Market & Tech Reports  Updated at: 2023/06/14

Company name Displayed items Remarks Mitsubishi Chemical Corporation(Chiyoda Ward, Tokyo) Mass production: Front grille(Suzuki SX-4 S-CROSS)Mass production: Center garnish(Suzuki HUSTLER)Mass production: Meter garnish(Suzuki Jimny) Material: Plant-derived PC materialBio-based engineering plastic "DURABIO"Process: Injection molding Zeon Corporation(Chiyoda Ward, Tokyo) PCV hoseVentilator hose Material: Biohydrin rubberProcess: Extrusion Unit...

Market & Tech Reports  Updated at: 2022/06/06

Mitsubishi Chemical’s DURABIO bio-based engineering plastic adopted for Suzuki S-CROSS Mitsubishi Chemical Holdings Group (Mitsubishi Chemical) announced that its DURABIO bio-based engineering plastic has been adopted for the front grill of the S-Cross manufactured by Suzuki Motor Corporation. This is the first time that DURABIO has been adopted for the exterior parts of Suzuki’s automobiles. DURABIO is a bio-based engineering plastic made fr...

News  Updated at: 2022/05/27

Mitsubishi Chemical to supply bio-engineering plastics for Toyota Mirai Mitsubishi Chemical Corporation (Mitsubishi Chemical) announced that its DURABIO bio-engineering plastics have been adopted for the rear heater control panel of Toyota Motor Corporation’s Mirai fuel cell vehicle. This is the first time for Mitsubishi Chemical to supply the DURABIO for the Mirai. The DURABIO, which is bio-engineering plastics using plant-based isosorbide, ...

News  Updated at: 2021/09/30

Mitsubishi Chemical to supply DURABIO bio-engineering plastics for Isuzu commercial vehicles Mitsubishi Chemical Corporation (Mitsubishi Chemical) announced that its DURABIO bio-engineering plastics have been adopted by Isuzu Motors Limited’s trucks for the covers of cross traffic alerts and blind spot monitoring radars. This is the first time for Mitsubishi Chemical to supply the DURABIO for truck parts. The DURABIO was adopted for the Elf lig...

News  Updated at: 2021/03/16

Mitsubishi Chemical adds new metallic colors to bio-plastics Mitsubishi Chemical Corporation announced that it has added a metallic color version to its plant-based DURABIO bio-plastics. The new metallic color version can create shiny surfaces without the need for painting. It demonstrates a high level of brightness and quality simply through the addition of pigments. The DURABIO also helps reduce volatility organic compound (VOC) emissions from ...

News  Updated at: 2021/02/09

sheet molding compounds (C-SMC). *PC: polycarbonate, PCM: prepreg compression molding, CFRP: carbon fiber reinforced plastics, PP:polypropylene, C-SMC: carbon fiber sheet molding compounds Mazda’s bio-based polycarbonate external decorative componentsDisplay panel: Bio-based polycarbonate DURABIO Weight reduction of automotive components using prepreg compression molding technologyDisplay panel: Weight reduction of automotive components...

Market & Tech Reports  Updated at: 2019/07/05

switching of Fresh Air Mode/Recirculation Mode, A/C temperature and air flow regulation. It makes use of the balanced properties of ABS resin (such as mechanical strength, electrical properties, thermal resistance, dimensional stability, decorative, and appearance). Speaker grill (Celanese) DURABIO made display panel (Mitsubishi Chemical) Because the part is commonly touched by passengers that may result in poor appearance due to scratc...

Market & Tech Reports  Updated at: 2018/11/14

reduces Volatile Organic Compounds (VOC) emissions compared to painting, contributing to a reduction in the environmental impact. Suzuki has been developing this technology for over 10 years.  Suzuki tied up with Mitsubishi Chemical which started producing the bio-based polycarbonate (PC) resin “DURABIO” around 2010. It was first applied on motorcycles, but later expanded to automobiles that require high quality. For those plastic components...

Market & Tech Reports  Updated at: 2018/06/28

Mitsubishi Chemical develops new Durabio bio-engineering plastic grade Mitsubishi Chemical Corporation (Mitsubishi Chemical) announced that it has developed a new grade for its Durabio bio-engineering plastic. Mitsubishi Chemical utilized a resin modification technology for morphology control with a phase-separated structure. It dramatically improved environmental reliability like chemical resistance and long-term durability while maintaining bio...

News  Updated at: 2018/06/13

Mitsubishi Chemical and Mazda develop new Durabio bio-engineering plastic grade Mitsubishi Chemical Corporation (Mitsubishi Chemical) announced that it has jointly developed a new grade of Durabio bio-engineering plastic that is applicable to large automotive exterior components with Mazda Motor Corporation (Mazda). Mazda has adopted the new grade for its CX-5's front grill, and will gradually expand its use to other new models. The new grade off...

News  Updated at: 2017/12/26

Features of this grade: (1) It features properties of high surface hardness (pencil hardness HB - 2H) and impact resistance. (2) Excellent color development compared with conventional PC/ABS resin. Although this product is made by Mitsubishi Engineering Plastics, Mitsubishi Chemical also launched "DURABIO," a bio-polycarbonate with similar applications. PC: Polycarbonate ABS resin: Acrylonitrile, Butadiene, Styrene copolymer resin PAMXD6 ...

Market & Tech Reports  Updated at: 2017/08/17