On September 24, Sollers Group announced the start of pilot production of the first batches of full-size frame-based Sollers S9 SUVs at the New Technologies Park within the UAZ industrial complex.
The first Sollers S9 SUVs were produced in Ulyanovsk using a full production process, including body parts made in-house.

On September 7, Sollers Transmission Production announced the start of production of electromechanical transfer cases for Sollers ST9 pickup trucks.
The new transfer case is an upgraded version of the existing units produced by SOLLERS Group. The design of the Sollers ST9 transfer case differs from the ST6 and ST8 v

On August 27, Sollers launched sales of the Sollers ST8 pickup truck with a new gasoline engine and automatic transmission.
The new Sollers ST8 features a 2.0-liter turbocharged gasoline engine producing 224 hp and 390 Nm of torque, as well as an 8-speed automatic transmission with a torque converter and manual shift

On August 18, the Zavolzhsky Motor Plant industrial site started serial production of small, stamped body parts for the entire UAZ vehicle lineup.
The project is implemented at the Zavolzhsky branch of UAZ. The company has commissioned universal presses with a capacity of up to 100 tons and automatic stamping equipme

On July 14, Sollers began production of a new version of the Sollers ST8 pickup truck, equipped with a new gasoline engine and an automatic transmission, at the Sollers Technology Park located at the UAZ industrial site.
The new Sollers ST8 is powered by a 2.0-liter gasoline engine producing 224 hp and 390 Nm of torq

On June 25, Sollers Group announced that it is transitioning its Sollers pickup truck lineup to galvanized body parts. 
The company also confirmed that Magnitogorsk Iron and Steel Works will supply rolled steel for its new press facility in Ulyanovsk, Russia. The steel is coated with a protective zinc layer through a

On June 19, Sollers Group inaugurated the Stamp Technologies plant and showcased its pre-production Sollers S9 (C9) SUV at the UAZ industrial complex. Stamp Technologies LLC is a joint venture between Sollers PJSC and Hefei Hualong Mould Co., Ltd. (JF Mould) for the production of body parts and frames for Sollers veh

On June 8, Sollers started serial production of passive safety system components, including steering wheels, airbags, and control units, at its industrial site in Ulyanovsk, Russia. The project is being implemented with support from the Industrial Development Fund (IDF).
The Security System Components (SSC) facility

On May 25, Sollers Group unveiled a pre-production version of the Sollers SA9 at the TransportFest International Transport Festival in St. Petersburg, Russia.
The Sollers SA9, the flagship model in Sollers Group’s bus lineup, is designed for intercity transportation and city tours. The bus is powered by a 370 hp dies

On April 23, Sollers Group announced that it has completed the development cycle and all engineering processes for the upcoming Sollers S9 SUV. During the final stages of the Sollers S9's development, engineering work on this model was carried out entirely in Russia. Sollers is now entering the final stages of establ

On March 31, SOLLERS Group started production of 6-speed manual transmissions for its Sollers SF5 and Sollers SF7 light commercial vehicles. The production is being carried out at the SOLLERS Transmission Production facility located at the ZMZ industrial site.
SOLLERS Transmission Production currently makes 6-speed

On March 23, Sollers Group announced that it will begin operations of a new coating booth at its Ulyanovsk site for applying protective polyurea coating to the cargo compartments of Sollers ST6, Sollers ST8 and UAZ Pickup. The booth is currently under commissioning and is scheduled to be fully launched in April 2026.

On March 18, Sollers Group launched a new production line for Sollers ST6 and ST8 pickup truck seats at the UAZ industrial site. The new production line has a design capacity of up to 40,000 seat sets annually. The project was implemented in partnership with AVTODOM.
The new line is flexible and can produce all types

On March 13, SOLLERS Group announced that it is preparing to launch a new production facility at the UAZ industrial site to produce steering wheels, airbags, seatbelts, and electronic control units, which will be manufactured by Components of Security Systems LLC, a subsidiary of SOLLERS PJSC.
The project will introd

On March 3, Sollers announced that a new high-tech pressing line at the UAZ site is being prepared for launch. Five presses are already operating in test mode, while robots are being programmed to enable fully automated stamping.
The line will soon start producing large body parts for Sollers vehicles and later for U

On February 19, Sollers Group started serial production of the seven-seat passenger version of the Sollers SF1 at its SOLLERS Alabuga plant. The passenger version of the Sollers SF1 is now available for order, with prices starting at RUB 2,250,000. The first production minivans are expected to go on sale in spring 20

On January 15, Sollers announced the launch of the Sollers SA6 bus. The new 9-meter model is now available, with prices starting at RUB 10,700,000.
The Sollers SA6 is equipped a 6.5-liter diesel engine paired with a six-speed manual transmission, producing 245 hp of power.
The SA6 features a comfortable 35-passenger

On December 12, the SOLLERS Group unveiled the new seven-seat Sollers SF1 passenger minibus in Moscow, Russia. The full-cycle production of the Sollers SF1 minibus is scheduled to begin at Sollers Yelabuga plant in the first quarter of 2026.
The Sollers SF1 is equipped with a 1.5-liter turbocharged gasoline engine th

On November 25, Sollers started sales for the full-size, seven-seat Sollers SP7 minivan, with prices starting at RUB 4,690,000. The Sollers SP7 minivan is manufactured at the Yelabuga plant.
The minivan is powered by a 2.0-liter turbocharged gasoline engine producing 237 hp of power. It is paired with an eight-speed

On November 7, Sollers announced that it has entered the final stage of developing its upcoming SUV. The pre-production prototypes are currently undergoing road testing.
The company shared the first footage from its partners’ testing grounds, where the camouflaged SUV is being put through extensive track trials. Sol