High-density Junction Block with PCB
		Image 1 Image 2 Image 3
Instrument Panel Wiring Harness
		Image 1 Image 2 Image 3 Image 4
Small Connectors		Halogen-free Wires
Image		Image

Wide-angle Front Camera >>Technical Information
<Features>
-Using newly developed super-wide-angle lens, this instrument takes a 190-degree image at a single instance with only one camera.
-For the purpose of enhancing safety by displaying camera images on in-vehicle monitor, following improvements were made. (1) Improvement of visibility in the right and left direction at intersections where vision is limited. (2) Improvement of visibility of the blind spot immediately below the front of a car.
Camera System with Automotive IEEE1394 Network ( Image)>>Technical Information

-This system employs a band-width control function of the video streams of several cameras (Side-downward, Side (right/left)-view, Rear-view and Front-view Camera) for monitoring outside of a vehicle with Automotive Network based on IEEE1394, and the management function of the connection between cameras and display devices.

In-vehicle multi media LAN/picture transfer system using AMIC-1394
-To propose a system equipped with a copyright protection function to deliver DVD video and terrestrial digital broadcasting content via LAN.
-Using a technique that prevents illegal copying (DTPC/IDB1394):
Transfer of DVD video content to a vehicle terminal is not permitted without using this system with a function to protect copyright.
Halogen-free Wires for Automobiles(Image)>>Technical Information
-Installed on vehicles including Toyota "Harrier HEV," "Alphard," Honda and Daihatsu models.

Tokyo Motor Show 2005

Power Sliding Door Harness >>>Technical Information
- Mounted on the Elysion and Odyssey by Honda
- The Company developed this wire harness that is able to supply continuous power and signals between the ECU on the body and the electric component located on the door by using angle control cables and guides.

Halogen-free Wires for Automobiles >>>Technical Information
The Toyota Alphard, which was launched in May 2002, was the first vehicle to feature halogen-free wires. Since then, the Company has supplied them to the various auto makers such as Toyota, Honda and Daihatsu Motors.

Exhibited Products


Appliance Components for Automobiles

The development of component parts, as well as improving and unitizing connection parts are performed at the Company so that various wire harnesses may become easier to assemble. Furthermore, many parts responding to customer requirements were developed and put into practical use to cope with the increasing volume of in-vehicle electronics. These products include waterproof connectors and direct-connection connectors.

<Typical Products>

Sensor
-Connector for mm wave radar

Power train
-Coil assembly for the drive control
-Connector for automatic transmission

Brake
-Plastic ECU case with combined connector

Engine electricity
-Crank rotation angle sensor built-in connector

Vehicle electricity
-Connector for electric power steering
-Lamp socket unit connector

Fuel
-Fuel tank relay connector


High-voltage Wiring Harness Systems for Electric Vehicle

<Typical Products>

Waterproof & EMI shielded connectors (shielded cable)
-Waterproof & EMI shielded connector for high voltage applications (9.5 style)
  Rated voltage: AC380V
  Rated current: 80A
-Waterproof & EMI shielded connector for high voltage applications (4.8 style)
  Rated voltage: AC380V
  Rated current: 30A

Shielded & waterproof high voltage connectors
-Waterproof & EMI shielded connector for high voltage applications (Shielded & Bolt clamp type)
  Rated voltage: AC500V
  Rated current: 80A
-Waterproof & EMI shielded connector for high voltage applications (Mold Terminal & shielded type)
  Rated voltage: AC500V
  Rated current: 80A
-Waterproof & EMI shielded connector for high voltage applications (Shielded & Bolt clamp type)
  Rated voltage: AC500V
  Rated current: 80A

Products for high voltage
-Shield Bracket
  Rated voltage: DC216V
-Terminal Block
  Rated voltage: DC380V
  Rated current: 80A

<New Products>

Shielded High-voltage Harness for HEV

Content of development
-Changed from individually shield wires to a single, integrated cable.
-Changed from aluminum die-cast housing to resin housing.
-The number of corrugated tubes is changed from 3 to 1.