BYD Han L 2025MY (China)

Overview

MarkLines offers for sale a benchmarking report on the BYD Han L prepared by AVL.
The BYD Han L is a flagship model representing BYD’s premium sedan segment and is a BEV built on an electric-dedicated e-Platform architecture.
With its large-capacity battery and high-output motor, it achieves both high-speed cruising performance and strong acceleration performance, while also emphasizing straight-line stability and ride comfort through its low-center-of-gravity package.
By enhancing body rigidity and integrating advanced driver assistance systems (ADAS), the model combines electrification with the refinement expected of a premium sedan.

Test Vehicle

BYD Han L 2025MY (China)

Dimensions	Length 5,050mm X Width 1,960mm X Height 1,505mm
Curb weight	2,466 kg
Drive System	AWD
Drive Motor Type	Front: AC induction motor / Rear: Permanent magnet synchronous motor
Motor Rated Output	Front: 230 kW (308 hp) / Rear: 580 kW (778 hp)
Motor Rated Torque	Front: 410 Nm (308 lb-ft) / Rear: 450 Nm (338 lb-ft)
Battery capacity	LFP Blade Battery: 83 kWh
Cruising range (CLTC cycle)	601 km (373 miles)

Report Overview

WP1.4 RDE Emission and Range: €4,500-
Actual measurement data is provided.
WP1.5 WLTP Emission and Range: €6,600-
Actual measurement data is provided.
WP1.7 Energy Management: €10,000-
Analysis of vehicle energy consumption in various driving cycles / Electrical energy management / Energy flow and efficiency analysis / Power consumption of auxiliary systems / Regenerative braking and regeneration capability / Operating strategy
WP1.10 Charging Experience: €12,500-
Charging efficiency and charging time / Energy consumption from the grid / Usage status of auxiliary systems / Battery conditioning (temperature management control)
A PDF-format report and actual measurement data are provided.
WP4 Battery Interface: €4,000-
Dimensions / Mechanical interfaces / Electrical interfaces / Thermal management interfaces / Service interfaces
WP6 Battery Tear Down Analysis: €55,700-
Battery overview / Housing structure / Thermal system / Module analysis / Teardown procedure
WP8 Cell Tests: €47,700-
Static capacity test / Rated capacity test / Pulse power test / High-rate charging test / Uocv = f (SOC)
A PDF-format report and actual measurement data are provided.
WP9 Battery Cost Analysis: €52,200-
Cost calculation methodology and assumptions / System cost overview / Assembly cost overview / Cost breakdown / Recycling concept
WP10 Cell abuse Tests: €55,100-
Crush test / Penetration test / Thermal stability test / External short-circuit test / Overcharge test
A PDF-format report and actual measurement data are provided.