armrests, and other components at Auto Shanghai 2023. Its highlights include new solutions for electrical air vents and sustainable headrests concepts. Grammer is showing 3 headrests in Shanghai with their individual CO2 footprints in figures – a standard solution, an evolution, using “green” steel and recyclable materials, and a “radical” solution, made of bio- or nature-derived foams, fabrics etc. This solution saves 80% of CO2 compar...

Major Suppliers  Updated at: 2025/07/19

Bosch of Germany as a pre-crash safety system, brake assist system (BAS), anti-lock brake system (ABS), traction control system (TCS), and hill hold start (HHS.) It employs six airbags as passive safety system, and 65 percent of the vehicle body consists of high tensile materials such as hot press steel. On January 15 Fiat, Chrysler and Guangzhou Automobile Group have signed a framework agreement on the expansion of business in China. The three ...

OEM Plants  Updated at: 2025/07/18

oka Plant in September 2016. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines will be stopped at four Toyota plants (Motomachi, Takaoka, Tsutsumi and Tahara) and 12 plants operating under ...

OEM Plants  Updated at: 2025/07/18

detecting even pedestrians. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines will be stopped at four Toyota plants (Motomachi, Takaoka, Tsutsumi and Tahara) and 12 plants operating under ...

OEM Plants  Updated at: 2025/07/18

SAIC Motor's Roewe RX5 debuts at Auto China 2016 IM Motors unveils all-new L7 intelligent battery electric sedan at 2021 WNEVC SAIC Motor brings ten brands including IM Motors and R Auto to Auto Guangzhou 2021 SAIC Motor’s passenger vehicle subsidiary teams up with Baosteel to build Co-Innovation Laboratory for advanced automotive materials The first Beta units of IM L7 smart electric sedans roll off production line...

OEM Plants  Updated at: 2025/07/18

oka Plant in September 2016. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines will be stopped at four Toyota plants (Motomachi, Takaoka, Tsutsumi and Tahara) and 12 plants operating under ...

OEM Plants  Updated at: 2025/07/18

3-), 508 SW PHV (2023-), 308 MHV (2024-), 408 MHV (2024-); Citroen C4 (2004-2018); DS4 (2011-2018), DS7 Crossback (2018- ), PHV DS7 Crossback E-Tense (2019-); Assembly of drive batteries; Components: Wheels, axles, hybrid rear axles (for PHV), suspension systems; Aluminium pressure castings, forged steel components, and tooling Stellantis (PSA)'s Passenger car assembly and component plant - Number of Employees: 4,250 (as of Jan. 2024) - Start of ...

OEM Plants  Updated at: 2025/07/18

sales double as company expands production Ford Mexico achieves carbon free manufacturing in all its plants in 2022 Ford to reveal refreshed 2025 Maverick on August 1 Ford’s refreshed 2025 Maverick gets all-wheel drive hybrid, more tech Ford upgrades 2025 Bronco Sport with Sasquatch capabilities, steel bumpers Ford begins production of 2025 Maverick and Bronco Sport at Hermosillo plant in Mexico Ford recalls 272,817 Bronco Sport, Maverick vehic...

OEM Plants  Updated at: 2025/07/18

On February 21 Changan Ford Automobile released the midsize Ford Focus Classic, with the price unchanged from the previous version. The 2013 Ford Focus Classic has new fog lamps and newly designed aluminum alloy wheels as standard. To improve the car's safety performance, its body is made of boron steel that is four or five times stronger than normal steel material. Luggage compartment of the sedan model is 526L, while that of hatchback ranging ...

OEM Plants  Updated at: 2025/07/18

and the maximum torque of 320 Nm. It gets a real-time all-wheel-drive. For the first time BYD installed new technology to measure the levels of PM2.5 (particle matter) in and outside the vehicle to purify air in the car on this model. BYD Auto Co., Ltd. signed a strategic alliance with Wuhan Iron & Steel (Group) Corporation in order to enhance corporation in the area of technology, R&D for new products, information sharing, and production and del...

OEM Plants  Updated at: 2025/07/18

000 buses and 10,000 units of chassis). On November 10 BYD's eBUS-12 rolled off the production line at the Changsha plant. The eBUS-12 uses the new aluminum body supplied by Alcoa, a major aluminum maker in the U.S., which reduces the body weight by 40 percent (1 ton) compared with the conventional steel body. The electric-powered bus also uses other Alcoa products such as cast wheel and fasteners, which contribute to a total weight reduction of ...

OEM Plants  Updated at: 2025/07/18

production. - 1975: Nissan Motor's Kyushu Plant started operation (engine production). - Land area: 2,362,000 square meters - Number of employees: Approximately 4,500 (as of April 2025) Nissan launches all-new Serena in Japan Nissan launches gasoline-fueled (2WD) all-new Serena Nissan to use Kobe Steel's low-CO₂ steel and green aluminum for Nissan models Nissan resumes orders for three models in Japan including X-Trail Nissan temporarily halt...

OEM Plants  Updated at: 2025/07/18

signs preliminary sales and purchase agreement for production facility in Hungary BYD holds supplier forum in Hungary Dürr, Germany to provide sustainable painting technology to BYD Szeged plant, Hungary BYD meets hundreds of potential suppliers in Turin, Italy voestalpine, Austria to supply flat steel for bodies and outer skin components to BYD Hungary plant On December 22, the Hungarian Investment Promotion Agency (HIPA) announced that BYD is...

OEM Plants  Updated at: 2025/07/18

w See-through View function. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines of Fujimatsu, Yoshiwara and Inabe Plants of Toyota Auto Body Co., Ltd., and the main plant of Gifu Auto Body C...

OEM Plants  Updated at: 2025/07/18

oka Plant in September 2016. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines of Fujimatsu, Yoshiwara and Inabe Plants of Toyota Auto Body Co., Ltd., and the main plant of Gifu Auto Body C...

OEM Plants  Updated at: 2025/07/18

tries and regions worldwide. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines will be stopped at Miyata Plant of Toyota Motor Kyushu, Inc. Operations are scheduled to recommence on Februar...

OEM Plants  Updated at: 2025/07/18

Progressive Steel Automotive Solution Pvt Ltd India Various machining Various stampings Motorcycle parts Heat treatment Sprocket ISO14001 ISO9001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/07/18

iter, in-line three-cylinder DOHC engine with multi point injection (MPI), mated to a 5-speed MT or a 5-speed AT with a manual mode. Other functions to improve the QQ's safety performance include antilock brake system (ABS) with electronic brake-force distribution (EBD) and cage-shaped high-tensile steel body. On April 16, Chery Automobile announced its strategic goals in three levels from 2013. According to the announcement, Chery Automobile wil...

OEM Plants  Updated at: 2025/07/18

a new pickup truck product. The launch of the Dadao brand will officially create a new category, “PUV”. The Xuntian architecture is an advanced technology architecture platform built by JMC in conjunction with Ford’s global R&D resources. It applies the longitudinal beam roll forming square steel technology for the first time, and applies for the first time the Watt’s linkage technology and a nitrogen shock absorber with variable dampin...

OEM Plants  Updated at: 2025/07/18

variant to its Vitz compact. Toyota Motor Corporation announced on February 1 that it will stop all of its production at 16 plants throughout Japan for six days from February 8 through 13, 2016. This is due to concerns about its parts procurement, which has been affected by an explosion at an Aichi Steel Corporation plant. Assembly lines of Nagakusa Plant of Toyota Industries Corporation will be stopped. Operations are scheduled to recommence on ...

OEM Plants  Updated at: 2025/07/18