in the stator yoke and offering more space for the magnets. Torsionally stiff, self-supporting wave winding   At the heart of the dual-rotor technology is the new winding, which supports the transmission of the generated torque through the stator. The stator consists of a segmented grain-oriented steel lamination stack.   The winding is constructed as a wave winding with conductor bars running in a helical pattern around the machine axis, whic...

Market & Tech Reports  Updated at: 2025/07/17

astic pipingDisplay panel for hydrogen piping, cooling piping and valves   VOSS Automotive, Inc. (VOSS), which handles various fluid piping and connection products for vehicles, exhibited hydrogen piping and valves for FCVs.   For 70MPa (700 bar) high-pressure hydrogen, VOSS proposes stainless steel piping using stainless steel high-pressure hydrogen pipes and fittings (VOSSLok40) that are compatible with existing 40° couplings, and for low...

Market & Tech Reports  Updated at: 2025/07/11

JSAE 2025 in Yokohama: Battery Technologies Battery life extension, safety components, etc. Summary Battery storage systems for electrified vehicles (Nissan, Mitsubishi, Honda, Suzuki, Hino, Isuzu) Battery cells and modules (ElringKlinger, Yazaki, Toshiba, JTEKT, Kobelco Research) Battery packs (Mitsubishi Chemical, Kautex, Martinrea, Nippon Steel, TDS) Battery cooling system (Futaba Industrial, Valeo) Measures to prevent battery fires (Henkel, O...

Market & Tech Reports  Updated at: 2025/06/27

contact and electrical conductivity with the inner ring of the bearing even at high speeds, thereby suppressing electrolytic corrosion.   Since the impedance is around 30Ω, its effectiveness as a radio noise suppressor is thought to be limited.   The "conductive brush" has a conductive brush and steel balls positioned at the center of the shaft. By bringing the conductive brush into contact with the shaft from the axial direction, a bypass pat...

Market & Tech Reports  Updated at: 2025/06/26

EMs facing increasing tariffs would be encouraged to make further investments in the U.S., citing GM and Hyundai's announcements of additional investments in the U.S. as successful examples. On the other hand, OEMs are lobbying the White House to reduce the additional 25% tariffs. Import tariffs on steel, aluminum, and their derivatives were raised from 25% to 50% on June 4.  While negotiations between the United States and other countries were ...

Market & Tech Reports  Updated at: 2025/06/25

mpany that manufactures body parts, functional parts, electronic parts, and plastic parts, and has global operations in North America, Turkey, India, China, and Asia. The exhibits are a center pillar outer reinforcement and front bumper reinforcement manufactured with cold-formed 1470 high tensile steel. The former is a pillar-shaped part located between the front and rear doors and connecting the floor to the roof. Because it is an important pa...

Market & Tech Reports  Updated at: 2025/06/24

Friedrich Boysen GmbH & Co. KG (Frederich Boysen) Benteler Automobiltechnik GmbH (Benteler) Marelli Europe S.p.A. (Marelli Europe) Bosal International N.V. (Bosal)   Catalyst substrate suppliers: NGK (NGK Corporation, formerly NGK Insulators, Ltd.) Corning Incorporated (Corning) Nippon Steel Chemical & Material Co., Ltd. (NSCM) Catalyst washcoat suppliers: Cataler Corporation (Cataler) Tokyo Roki Co., Ltd. (Tokyo Roki) BASF SE ...

Market & Tech Reports  Updated at: 2025/06/19

ls and silicon negative electrode materials, which are prone to causing battery expansion. Secondly, large cylindrical batteries need to be charged and discharged at high rates, which will damage the electrode materials and shorten their lifespan. Large cylindrical batteries often use nickel-plated steel as the shell material to resist deformation, but the steel shell materials are mainly imported into China and lack cost advantages. 1. CATL (Co...

Market & Tech Reports  Updated at: 2025/06/12

JSAE 2025 in Yokohama: Metal Processing Technology Giga-cast in Japan, integrally formed high-tensile frames, uncoated steel sheets, adhesives and more Summary Weight reduction with aluminum using Gigacast, etc. Integrally formed high-tensile frame (automotive parts supplier) Integrally formed high-tensile frames (proposed by steelmakers and equipment manufacturers) Environmental friendliness of body and chassis: Paintless steel sheet, hard coat ...

Market & Tech Reports  Updated at: 2025/06/03

gh voltage architecture, and has an EV-mode range of 300km and an overall range of 2,000km. Equipped with the Group's latest research results, the 7D Smart All-Terrain System, it can handle water depths of up to 900mm and has a maximum climbing capability of 45 degrees. Use of high tensile-strength steel and aluminum exceeds 88%, and the vehicle is equipped with quantum cryptography and low earth orbit satellite technology. The driver assistance ...

Market & Tech Reports  Updated at: 2025/05/30

7.3-liter PFI V8 engine with ROUSH CleanTech's low-emission propane technology. A 45-gallon fuel tank which uses HD-5 propane is mounted on the outside of the driver's side frame rail between the two axles. The engine generates 335 hp and 468 lb-ft of torque at 3,750 rpm. The stripped chassis has a steel frame rated at 50,000 psi with a gross vehicle weight rating of 23,000 pounds and gross combined weight rating of 33,000 pounds. It also has an ...

Market & Tech Reports  Updated at: 2025/05/29

mply with the copper content regulations, while attempting to balance the high braking performance requirements of friction materials with concerns such as brake squeal and the amount of brake dust released. Brake pad materials are typically divided into non-asbestos organic (NAO) materials with no steel and low-steel (LS material) metallic-type friction materials, depending on the amount of friction required. By developing high value-added next-...

Market & Tech Reports  Updated at: 2025/05/29

tteries to many of its models in the future. The company will also cooperate comprehensively with CATL in many areas, including the construction of battery swap stations, battery bank business, marketing of battery swappable models, and used batteries. GAC PICKUP 01 All-round technology concept: Steel frame construction. Equipped with a "Double Cab Smart Cockpit" that is tailored to global markets, the pickup truck embodies a wide range of lif...

Market & Tech Reports  Updated at: 2025/05/20

lable in three grades. Prices range from CNY 248,800 to 278,800. All models are equipped with 2-chamber air suspension plus intelligent variable dampers as standard. 2025 model year X9 2025 model year G6 2025 model year G9     Also on display at the motor show was XPeng's high-strength steel-aluminum composite body and the world's first modular flying car, the Aircraft Carrier. High-strength steel/aluminum hybrid body Aircraf...

Market & Tech Reports  Updated at: 2025/05/09

tion which appears to stack multiple additional tariffs on top of each other. He said that the additional tariffs on imported finished vehicles stand alone and that no other tariffs should be applied. (relief measures applied retroactively to March 4) Non-overlapping tariffs・Additional tariffs on steel and aluminum products: 25%・Additional tariffs on Mexico and Canada based on the International Emergency Economic Powers Act (IEEPA): 25% Overl...

Market & Tech Reports  Updated at: 2025/05/02

ed on February 15, 2025 in Panyu, Guangzhou. The total investment is over CNY 1.2 billion and the site area is approximately 83,000 square meters. It will be built in two phases. The first phase will begin production in January 2026. Annual production capacity will be 125,000 battery cases, 200,000 steel-aluminum sub-frames, and 130,000 body parts. The second phase will focus on innovation in modularized integrated die-casting technology, with pl...

Market & Tech Reports  Updated at: 2025/04/24

d power density is 16.4kW/kg. Furthermore, BYD's motor speed has evolved from 7,500 rpm in the first generation to 30,511 rpm in the current sixth generation. 30,000 rpm drive motor(Source: BYD presentation video) Technology Details Rotor Laminated core material High-strength silicon steel of 1,000 MPa is used. The yield strength of the steel is 138% higher than that of ordinary silicon steel, and it can withstand enormous centrifu...

Market & Tech Reports  Updated at: 2025/04/23

fecture) Carbon wheels BST brand Carbon composites Heat press Bito R&D Co., Ltd. (Toyooka City, Hyogo Prefecture) Forged magnesium wheels Magtan Magnesium alloy Warm forging (8,000 tons) → Machining Cast iron sliding surface, two-piece brake disc Sliding surface: Cast iron Hat part: Stainless steel Rivet fastening ONE OR EIGHT Co., Ltd. (Ayase City, Kanagawa Prefecture) Carbon-aluminum composite frame Carbon composite material/ Aluminum ...

Market & Tech Reports  Updated at: 2025/04/15

Anantapur Plant in June 2020.   Announcement of Plan to Invest USD 21 Billion in the U.S. On March 24, 2025, Hyundai Motor Group announced plans to invest USD 21 billion in the United States between 2025 and 2028 (USD 9 billion for production expansion, USD 6 billion for parts, logistics, and steel, and USD 6 billion for future technology and energy). In the automotive division, Hyundai plans to increase the production capacity of Hyundai ...

Market & Tech Reports  Updated at: 2025/04/07

a H.28 offers a 500 km range, depending on cylinder configuration. Built for safety, it complies with the AIS H2195 safety standard.   Tata Prima E.55S: electric truck Prima E.55S electric truck   The Tata Prima E.55S is a heavy-duty electric truck, designed for demanding applications in steel, cement, and port operations. It features a full-electric drivetrain with an integrated e-axle, ensuring zero emissions and superior performance...

Market & Tech Reports  Updated at: 2025/03/27