of the Actros. All versions feature modern drive technology, high efficiency, and the innovative concept of the eActros 600. Mercedes-Benz eActros 600 trucks were produced at the Wörth plant in November 2024. The truck features over 600 kWh of battery capacity and a newly developed electric drive axle, giving it a range of about 500 km per charge and the ability to cover more than 1,000 km per day. It uses three battery packs (207 kWh each) for...

News  Updated at: 2025/09/23

h a manual 8-speed transmission and a 4x2 propulsion system. The truck is equipped with assisted steering using a domestic steering mechanism, front and rear leaf-spring suspension, optional rear pneumatic suspension, front disc and rear drum brakes, engine brake, automatic drain valve, and a front axle stabilizer bar with a simple reducer rear axle. Wheelbase options include 4,200, 5,000, and 5,700 mm, while the vehicle weight ranges from 5,650 ...

News  Updated at: 2025/09/23

t Act), and it issued a warning to JTEKT to prevent a recurrence. JTEKT failed to pay the full amount owed to its subcontractors for manufacturing parts, which violates “prohibition on deductions of subcontract fees.” JTEKT stated that from April 2025, “we have changed our policy so that bank transfer fees are borne by JTEKT. We sincerely apologize to our business partners and relevant parties for any inconvenience may have caused.” The t...

News  Updated at: 2025/09/22

Malaysian Pacific Industries Bhd to take over Infineon’s Bangkok backend fab, Thailand On September 18, 2025, Infineon Technologies AG announced it will transfer its backend manufacturing site in Bangkok/Nonthaburi, Thailand, to long-time supplier Malaysian Pacific Industries Berhad (MPI).  The Bangkok site, which serves automotive, connectivity, and IoT packages, will retain all current production employees as part of MPI. The transaction, ex...

News  Updated at: 2025/09/19

the system at three production lines for the volume production of electric parking brake (EPB) switches and steering switches. The production line for EPB switches consists of seven general-purpose modules, including a parts storage module that supplies parts, a robot module for parts assembly and transfer, and a grease application module. (From an article in the Nikkan Jidosha Shimbun on September 19, 2025)...

News  Updated at: 2025/09/19

11, a new electric bus built on the platform, in Hangzhou. The e-Bus Platform 3.0 features innovations in safety, efficiency, and intelligence, highlighting the world’s first production all-domain 1,000V architecture for buses, a 1,500V silicon carbide power chip, and the world’s first 1,000V e-axle for buses. For safety, the e-Bus Platform 3.0 leverages the pioneering bus CTC (Cell to Chassis) technology for in-depth integration of the indus...

News  Updated at: 2025/09/18

id featuring proprietary Shell Gas-to-Liquid (GTL) Technology has been developed, which can charge from 10% to 80% capacity in under 10 minutes. The electrically non-conductive fluids reduce thermal stresses, allowing much higher cell charging currents to be tolerated. It facilitates excellent heat transfer by filling all the interstitial spaces within the battery pack, maximising direct contact between the fluid and each battery cell. Based on S...

News  Updated at: 2025/09/17

SJS Enterprises, India sign MoU with BOEVX, Hong Kong for automotive display manufacturing On 16 September 2025, S.J.S. Enterprises Limited (SJS) signed a memorandum of understanding with Hong Kong-based BOE Varitronix Limited (BOEVX) for collaboration on manufacturing automotive display screens in India. The MoU provides for the transfer of display technology, assembly, and optical bonding, including localization of cover glass and backlight uni...

News  Updated at: 2025/09/17

ndonesia. Sustainability is also a priority, with Antolin introducing recycled materials, bio-based adhesives, and eco-friendly processes, while AAA explores a pilot for a fully sustainable vehicle interior. Beyond manufacturing, the center is designed to nurture local talent, facilitate knowledge transfer, and strengthen supplier networks. (From Antolin press release dated September 13, 2025)...

News  Updated at: 2025/09/16

IAA Mobility 2025: Gentex, US, presents new technologies for driving comfort and safety On September 8, Gentex Corporation presented automotive features that enhance driving comfort and safety at IAA Mobility 2025. It also highlighted technologies from its partners, including automotive thermal sensing from ADASKY, and wireless power and data transfer from Solace. Gentex’s dimmable sun visors fold down like traditional sun visors but include a ...

News  Updated at: 2025/09/15

Proterial to transfer automotive casting and ceramic filter businesses to US investment firm Proterial, Ltd. (Proterial) announced on September 9 that it will transfer its automotive casting and exhaust gas ceramic filter businesses currently run by Proterial and its subsidiaries to a US-based investment company. The transfer will take place in January 2026. The subjects of the transfer to the investment company are Proterial’s Moka Works (Moka...

News  Updated at: 2025/09/11

Audi opens RS Q8 Performance pre-sales in Brazil On September 5, Audi Brazil announced the start of pre-sales for the new RS Q8 Performance. The model, available in a single Performance trim, features a 4.0-liter twin-turbo V8 engine delivering 640 hp and 850 Nm of torque, paired with an eight-speed Tiptronic transmission, quattro sport differential, dynamic rear axle and adaptive air suspension. It accelerates from 0 to 100 km/h in 3.6 seconds, ...

News  Updated at: 2025/09/10

y 2025 in Munich, Germany. Highlights include by-wire chassis technologies, with series production orders for its steer-by-wire and brake-by-wire systems from Chinese, European, and North American automakers. Through its Chassis 2.0 concept, ZF integrates networkable actuators, such as the AKC rear axle steering system, active and semi-active damping systems, and electronic roll stabilization with its cubiX software to enhance driving behavior an...

News  Updated at: 2025/09/09

IAA Mobility 2025: Rimac Technology unveils advanced batteries, powertrains, and ECUs On September 8, Rimac Technology unveiled its latest advanced battery and powertrain technologies at IAA Mobility 2025 in Munich, Germany. The showcase includes next-generation solid-state solutions and updates to its existing batteries and e-Axles, its role as a leading tier-1 supplier. The company showcased three types of batteries at the event, which included...

News  Updated at: 2025/09/08

IAA Mobility 2025: Protean, UK to present latest generation of IWM technology On September 5, Protean Electric announced that its latest generation of ProteanDrive, entering production in 2026, will achieve price parity with twin e-axle solutions and offer lower vehicle costs. It will present this new IWM and its advancements at the upcoming IAA Mobility show.  Already nominated by a European OEM in a performance electric vehicle (EV) set for SO...

News  Updated at: 2025/09/05

.0T V6 twin-turbo engine (260kW/500Nm) and an in-house developed 9-speed automatic transmission (maximum efficiency over 97%), delivering a 0 to 100km/h acceleration time in the 6s range; a 48V motor for a perfect balance between power performance and fuel economy; a BorgWarner high-performance 4WD transfer case for upgraded escape capabilities; front and rear axle electronically controlled differential locks; low-speed cruise control; tank turn;...

News  Updated at: 2025/09/05

Dacia expands powertrain lineup with Hybrid-G 150 4x4 for Duster and Bigster On September 4, Dacia introduced a new hybrid-G 150 4x4 powertrain for both the Duster and Bigster models. This combines hybrid tech, LPG bi-fuel, and all-wheel drive. It uses a 1.2-litre 48V mild-hybrid engine of 140 hp on the front axle and a 31 hp electric motor on the rear, delivering a total output of 154 hp. Torque is 230 Nm from the gasoline engine and up to 87 Nm...

News  Updated at: 2025/09/04

Benteler’s Fuzhou plant delivers off-tooling sample of axle module for new electric MPV Benteler Group (Benteler) announced that its plant in Fuzhou, China, has delivered its first off-tooling sample (OTS) of axle module for a new electric multi-purpose vehicle (MPV), marking a significant milestone for the plant. The vehicle is based on a forward-looking platform from an international automotive manufacturer. An OTS is produced with series too...

News  Updated at: 2025/09/03

engine market is expected to shrink in the future, and Niterra aims to maximize residual profits, including demand for replacement products, by expanding its business through its “contrarian strategy”. Niterra and Denso signed a basic agreement in July 2023 to start discussions for the business transfer. Niterra will acquire the domestic and international development, production, and sales of spark plugs and exhaust sensors operated by Denso ...

News  Updated at: 2025/09/03

Toyota Argentina starts Hiace exports to Brazil On September 1, Toyota Argentina announced the start of Hiace exports to Brazil, marking Toyota do Brasil’s entry into the regional van market. Production of Hiace in Argentina began in 2024 at the new facility in Toyota’s Zarate plant that complements Hilux and SW4 manufacturing, sharing the same 2.8-liter engine and rear axle. Equipped with a six-speed automatic transmission, advanced safety f...

News  Updated at: 2025/09/03