Components shown include power transfer unit, compressor, anode recirculation blower, injector, control uits, tank valves, tank manifolds, tank plugs, and pressure control valves
Updated fuel cell module system designed for heavy-duty long-haul trucks with a power output of 300 kW; The module has 50% greater output and is 10% smaller than the Company's previous unit, with a reduction in weight of 100 kg; The new module enables weight savings by utilizing a single set of fuel cell components with a double fuel cell stack; System also has a higher degree of system integration; System to launch in 2028
×
Supplier Database
e-comp Scroll air compressor Advanced Clean Transportation Expo 2025 ZF Friedrichshafen AG
Air compressor for medium- and heavy-duty hybrid, battery electric, and fuel cell commercial vehicles; Can compress air up to 12.5 bar; Integrates e-motor, inverter, and liquid cooling system in a compact form factor; Uses innovative scroll technology to minimize noise and vibrations; Provides energy savings by shutting off when compressed air is not required
×
Supplier Database
High voltage low power eFan system Vienna Motor Symposium 2025 BorgWarner Inc.
HV low power eFan System designed to cool components such as the fuel cell, traction motor, electric brake, or the battery pack in BEV/FCEV medium/heavy duty commercial vehicles delivering highest cooling performance uphill and with full load at low noise. Torque: 40 Nm@2600 rpm Power: 10 kW Voltage: 550 - 850 V Fan diameter: 450 - 813 mm E-Motor: radial flux type Inverter: attached/remote Cooling: Liquid
×
Supplier Database
Fuel cell valves Auto Shanghai 2025 Schaeffler Group (China)
The structure is largely the same as that for gasoline vehicles, but improvements have been made, including a change to a casting material that is less prone to hydrogen leakage and the use of low-conductivity coolant to prevent rusting.
×
Supplier Database
Air cleaner for FC 2025 JSAE Automotive Engineering Exposition MAHLE GmbH
- The product achieves the high precision, low contamination, and multi-specification surface treatment required for fuel cell components. In addition, the weight is reduced by using PPS molding instead of aluminum casting.
Motor speed greater than 150kRPM, DC power consumption is 15kW 2 million start-stop lifespan, energy consumption is reduced by 5-10% Oil-free foil bearings are used, and the stack is designed to be pollution-free Mass production timing: 2024
×
Supplier Database
New generation hydrogen fuel cell electric air compressor Auto Shanghai 2025 Garrett Motion Inc. (Formerly Honeywell Turbo Technologies Inc.)
Designed for medium and heavy-duty commercial vehicles, mass production is expected in 2026 Design life is greater than 25,000 hours, DC power consumption is 50kW, and efficiency is increased by 20-30%
×
Supplier Database
Fuel Cell Control Unit Bharat Mobility Global Expo 2025 Schaeffler AG
This control unit controls the hydrogen fuel stacks, manages the flow of hydrogen and air, monitors the temperature and pressure, and optimizes the power output to the vehicle's drivetrain.
×
Supplier Database
Stack Control Valve Bharat Mobility Global Expo 2025 Schaeffler AG
It is throttle-like actuator used in fuel cell systems or air management systems to regulate airflow. It is essential for controlling the amount of air or gases entering a system, ensuring optimal performance and efficiency.
×
Supplier Database
Fuel Cell System FCM-150 World Smart Energy Week 2025 March OPmobility SE (Formerly Compagnie Plastic Omnium SE)
PEM Fuel Cell Stack module by EKPO High power performances Plug-and-play system include DC/DC converter enabling system parallelization Max efficiency over 60%
×
Supplier Database
Fuel Cell Control Unit World Smart Energy Week 2025 March Schaeffler AG
The Fuel Cell Control Unit (FCCU) controls the actuators of the fuel cell system based on the various sensor signals it reads, ensuring the appropriate supply of hydrogen, air, and cooling
×
Supplier Database
Stack Control Valve World Smart Energy Week 2025 March Schaeffler AG
The fuel cell stack control valve is used to control the air inlet and outlet of the fuel cell stack By continuously controlling the throttle plate position, the inlet air and back pressure in the fuel cell stack can be precisely controlled
×
Supplier Database
Metal bipolar plate for fuel cells World Smart Energy Week 2025 March Schaeffler AG