在供应链和生产、品质管理方面以现代汽车为榜样，努力向高品质 (High Qualify)、高效率 (High Efficiency)、采购高竞争力 (High Competence) 的3H标准发展。 新技术 推出智能化 (Smart)、电动化 (Electrical)、低碳化 (Low-Carbon)、轻量化 (Light-Weight) 的"SELL计划"。 *MB- TECH是北京北汽德奔汽车技术中心有限公司 (Beijing BAIC MBtech Development Center Co. Ltd.)。MBtech...

新闻  2015/09/30 更新

美国交通部，将在重型卡车和客车上安装ESC纳入义务     3日，美国交通部秘书长Anthony Foxx宣布，NHTSA已经通过了把对重型货车和客车安装防侧滑装置（ESC: electronic stability control）纳入义务的最终决议（FMVSS No. 136）。    最终决议规定，总重量为（Gross Weight）26,000磅（约11.8吨）以上的重型货车和客车有义务安装防侧滑装置。将用模拟高速...

新闻  2015/06/04 更新

e of identical amplitude to the waveform of the original disturbance, but with opposite polarization, creating the desired level of destructive interference to reduce or cancel the amplitude of the noise or vibration.  The AVC system can also replace the balance shaft, giving a significant overall weight reduction in the vehicle, contributing to further fuel efficiencies. (From a press release on November 14, 2011)...

新闻  2011/11/14 更新

Alcoa develops new space frame for BYD Electric Bus Alcoa, Inc. announced it has developed a new all-aluminum space frame and bus design for BYD that has reduced the weight of the new BYD Electric Bus body by 40 percent, or nearly one ton, versus steel options. In addition to reducing the weight of the bus body, Alcoa solutions including Alcoa forged wheels and Huck Spin(R) fasteners reduced the overall bus weight by 1.2 tons in total. The combin...

新闻  2011/11/10 更新

Johnson Controls develops new light weight front seat structure Johnson Controls Inc announced that it has developed a lightweight modular front seat structure. The new seat structure offers a weight reduction of 4.0 to 6.4 kilogram per vehicle. This includes lightweight seat rails and electric spindle drives of C. Rob. Hammerstein (CRH), using all synthetic materials for the tilt adjustment module rather than the conventional use of steel. The r...

新闻  2011/10/26 更新

ZF to unveil new portal axle AV 133 ZF Friedrichshafen AG will present the new low-floor portal axle AV 133. The new axle generation will be introduced in two stages – to be implemented by 2014. The first implementation stage, focusing on higher torque resistance, optimization of maintainability and weight, will be completed by the end of 2011. During 2014, the second stage will focus on the further improvement of efficiency, noise level and we...

新闻  2011/10/21 更新

ZF supplying components for VDL Futura ZF Friedrichshafen AG announced that it is supplying its components for VDL Futura coach. The supplier group delivers front, rear, and tag axles, clutches, and steering systems. The ZF front axle single wheel suspension RL 75 E and the ZF drive axle A 132 not only increase rolling comfort but also contribute to the lower total weight. These comfort features are enhanced by ZF Lenksysteme's compact Servocom 8...

新闻  2011/10/20 更新

celebrate the production start of seat frames and seat covers. The seat frames that have begun to be produced at this new plant are the next-generation "TB-NF110 Series" seat frames that are characterized by the structure designed in the pursuit of excellent riding comfort performance with reduced weight and resources, which are realized by the use of high-tensile steel in the 980 MPa-class for a portion of the seat frame material. These seat fr...

新闻  2011/10/17 更新

total period of 42 months. The OPERA4FEV project aims to develop thermoplastic battery racks on two functional demonstrators: one for a large scale vehicle from Fiat and one for the F-City from FAM. The main issues relative to OPERA4FEV project include: 50% reduction of number of components and 30% weight reduction on components (cells excluded). (From a press release on September 29, 2011)...

新闻  2011/09/29 更新

Alcoa supplying new aluminum sheet alloy for Russian trailer manufacturer Alcoa, Inc. and Becema Jsc, a Russian producer of tanks and semi-trailers, have launched a new lightweight aluminum cement hauler for the Russian market using Alcoa's new aluminum sheet alloy 1565M. By using Alcoa's new sheet alloy, the weight of the tank body has been reduced by 25-30 percent over base aluminum alloys. The weight has been reduced 300 percent versus a steel...

新闻  2011/09/22 更新

ZF develops lightweight brake pedal ZF Friedrichshafen AG developed the lightweight brake pedal produced on the basis of endless fiber reinforced composite materials and injection molding. About 50 percent weight can be saved compared to a standard brake pedal made of steel. (From a press release on September 5, 2011)...

新闻  2011/09/05 更新

which is cheaper than metal, is lighter and can be designed with a complex shape. This enables the integration of different functional parts into one system, in this case engine bearing, oil filter and oil cooler. This functional integration reduces the amount of material used and therefore lowers weight. (From a press release on September 2, 2011)...

新闻  2011/09/02 更新

Eberspaecher supplying titanium exhaust system for Porsche Prototechnik GmbH & Co. KG, a subsidiary of Eberspaecher Group, is supplying the titanium exhaust system for the current Porsche 911 GT3 RS 4.0 – compared with the stainless steel 911 GT3 version, a weight saving of more than 40 per cent was achieved. Prototechnik has also contributed to the new Eberspaecher ActiveSound/ActiveSilence(R) component. In this, acoustic emissions are reduced...

新闻  2011/08/30 更新

DuPont's thermoplastic polymer selected for interior of Toyota Prius α DuPont announced that Toyota's new hybrid vehicle "Prius α", which is launched in Japan in May 2011, features automotive interiors made of DuPont(TM) Sorona(R) EP polymer, a thermoplastic resin. Sorona(R) EP polymers contain between 20% and 37% renewably sourced material (by weight) derived from plant sugar. Developed in close collaboration with Toyota Motor Corporation, Koj...

新闻  2011/08/25 更新

Delphi develops lightweight Aluminum Cable Delphi Automotive LLP announced that its Aluminum Cable offers a weight reduction of up to 48 percent compared to traditional copper core cable. Since approximately 227g of aluminum can replace 454g of copper, about 1.8kg can be trimmed from a typical vehicle. This technology will be on the road next year. (From a press release on August 25, 2011)...

新闻  2011/08/25 更新

Delphi develops new Ultra-Light Radio Delphi Automotive LLP is applying its weight-saving techniques to the frames and casings of electrical and electronic systems. Delphi's Ultra-Light Radio incorporates a plastic composite technology to save up to 0.54kg when compared with a conventional metal-case radio. This solution also eliminates up to 30 components. (From a press release on August 25, 2011)...

新闻  2011/08/25 更新

Delphi develops new diesel common rail system Delphi's new diesel common rail (CR) system includes the solenoid-type diesel common rail injector technology with Delphi's next generation DFP6 fuel pump. Increased focus has been placed on minimizing the FIE system mass to reduce engine and vehicle weight. The main contributor to the FIE mass reduction comes from the CR pump, which allows for a mass reduction of 40 percent over previous generation f...

新闻  2011/08/25 更新

Delphi develops lightweight Cooling Module Delphi Automotive LLP announced that its Front-End Cooling Module, which combines the radiator, charge air cooler, condenser and fan-motor-shroud assembly, can provide a weight savings of 4 kg as well as reduce the electrical power consumption of the cooling fan by 350W. (From a press release on August 25, 2011)...

新闻  2011/08/25 更新

Delphi develops new Tube Condenser Delphi Automotive LLP has developed new 12mm Folded Tube Condenser, which uses a fabricated tube construction to provide reduced weight and improved performance in a package that is the thinnest available. Available in 2015, the new 12mm Folded Tube Condenser also supports the efficiency of new R-1234yf refrigerant systems. (From a press release on August 25, 2011)...

新闻  2011/08/25 更新

Tenneco's fabricated manifold systems provides weight and packaging advantages Tenneco's family of fabricated manifold systems include shell, tubular and double-wall air gap insulated manifolds, all of which provide significant cost, weight, durability and packaging advantages when compared to cast manifolds. (From a press release on August 24, 2011)...

新闻  2011/08/24 更新