已开发出支持Rust编程语言的汽车微控制器(MCU)“AURIX TC3xx”和“TRAVEO T2G”。  这些MCU为功能安全和网络安全提供多种集成硬件功能。此外，通过支持Rust可以在软件方面补充这些硬件功能。  TRAVEO使用官方的Rust工具链和Arm Cortex-M Target，英飞凌的工具合作伙伴HighTec EDV-Systeme开发出AURIX专用的Rust编译器。  Rust是由开源社区开发的一种新的编程...

新闻  2023/03/10 更新

黑芝麻智能发布瀚海自动驾驶中间件平台 黑芝麻智能科技有限公司[Black Sesame Technologies Co., Ltd.]（黑芝麻智能）发布瀚海-ADSP（Autonomous Driving Solution Platform）自动驾驶中间件平台。该中间件平台是黑芝麻智能基于华山系列自动驾驶计算芯片所推出的一款智能驾驶平台SDK开发包，包含Target(SoC)SDK、X86(Host主机)端SDK、Target(MCU)端SDK，可以支持车端...

新闻  2022/05/13 更新

该实验室被设计成一个协作性的虚拟工作空间，可创建模拟的工作环境，来自全球各地的沃尔沃工程师可以利用虚拟现实、人体运动跟踪和逼真的车辆数字渲染等技术进行虚拟连接和协作。  沃尔沃集团基于行业的SBTi(Science-Based Target Initiative)目标，提出到了一个1.5度的目标，即到2040年将其价值链中的温室气体(GHG)排放量减少到几乎为零。...

新闻  2022/03/29 更新

建模和模拟的访问。通过基于虚拟孪生的大规模协作系统，将提高各功能之间的数据共享和内部敏捷性，降低成本，并将车辆开发周期缩短约一年。  雷诺集团提供四种工业解决方案，包括基于3DEXPERIENCE云平台的达索系统的“On-Target Vehicle Launch”、“Smart, Safe & Connected”、“Global Modular Architecture”、“Efficient Multi-Energy Platform”。Renault press r...

新闻  2021/12/24 更新

用，召回总金额预计达18亿美元。  通用表示，在韩国梧仓工厂的上游LG化学工厂指定生产的电池电芯生产方面发现了问题，因此扩大了召回车型范围。  同过去的召回相同，通用建议将召回车辆停在外面、使用Hilltop Reserve模式或Target Charge Level模式将充电量控制在90％以下、电池的剩余续航里程不要低于70英里(约113km)。(GM press release on August 2...

新闻  2021/08/24 更新

电池供应商LG化学(LG Chem)的专家已经确认，Bolt EV电池起火的根本原因是同一电芯同时存在两个制造缺陷。该电池由LG化学在韩国的梧仓工厂生产。在维修完成之前，通用将把Bolt EV停在外面，使用Hilltop Reserve模式（2017-2018年款）或Target Charge Level模式（2019年款）将充电水平限制在90%，并建议电池余量续航里程不应低于70英里（约113km）。(Detroit ...

新闻  2021/08/19 更新

在两个罕见的制造缺陷”。目前为止已确认了9起起火事件。  具体的维修程序还没有决定，但通用汽车将更换有缺陷的电池。  通用汽车提醒客户继续将他们的Bolt EV停在户外，并通过2017-18款车型的Hilltop Reserve模式、2019款车型的Target Charge Level功能将电量最高充至90%。  召回车辆必须在每次使用后进行充电，而且电池剩余电量的续航能力需...

新闻  2021/07/28 更新

起开始更新电池软件，将电池的满电量限制在90％。  通用计划从2021年初开始实施一项永久性措施，以使最大充电量接近100%。  通用希望车主能在经销商改进软件之前，将2017-2018款车型切换到Hilltop Reserve模式，将2019款车型切换到Target Charge Level模式，以维持最高90％的充电量。  如果无法切换充电模式，通用建议不要把车停在车库或车棚里...

新闻  2020/11/18 更新

出了作为使自动驾驶时代复杂的驾驶控制功能更加容易的多内核微处理器用软件开发解决方案，即RH850多内核模型基础开发环境(RH850 Multicore Model-Based Development Environment，简称RH850 MBD)。Renesas Electronics将新产品的名称暂定为“Embedded Target for RH850 Multicore(暂称)”，计划2016年秋发售。参看Renesas Electronics公告  ...

新闻  2016/07/06 更新

Autoliv aims at 500 million USD in sales of active safety products in 2015 Autoliv, Inc. confirms its sales target for active safety products (radars and vision systems) and its market share. The target for 2015 is 500 million USD with a global market share of approximately 30%. (From a press release on November 15, 2011)...

新闻  2011/11/15 更新

will manufacture dual dry clutch transmissions (DDCT) systems for Fiat. The three parent companies agreed that the joint venture will invest 2,269 million yuan to introduce necessary technology from Fiat and increase production capacity. Production of the DDCT systems will start in 2013 with a target of manufacturing 500,000 units per year in the future. (From news releases issued by multiple sources on June 7, 2011)...

新闻  2011/06/07 更新

Nifco to establish new manufacturing facility in China Nifco Inc. has set up a new company to manufacture and sell synthetic resin molded components in Zhangjiagang, Jiangsu Province, China. Nifco currently operates eight facilities in China, supplying its products mainly to Japanese and Korean automakers. The new entity, which is its ninth location in China, will target non-Japanese automakers in China. The 7 million USD (approx. 600 million Jap...

新闻  2011/01/27 更新

American Axle & Manufacturing Holdings, Inc. (AAM) announced that its backlog of new business launching from 2011 through 2013 is estimated at 850 million dollars in future sales. It is more than 20% higher than the previous three year backlog for 2010 – 2012. AAM's new business backlog for 2011 – 2013 supports AAM's goal of achieving a 3 billion dollars sales target in 2013. Over 50% of this backlog is for customers other than GM. This inclu...

新闻  2010/11/16 更新

ruck tires. The investment will go to increasing capacity, which is estimated to rise to over 6 million units annually by 2013, an increase of over one million units from the present 5 million. By the end of 2010, Pirelli's sales in the country are expected to grow by 55% to 365 million USD and the target for 2013 is 500 million USD. (From a press release on October 20, 2010)...

新闻  2010/10/20 更新

Dongfeng Motor Parts And Components Group Co., Ltd. generated sales of 4,449 million yuan in the first half of 2010. This figure is almost double the amount reported for the same term last year. In addition, the Company says that it has produced 80.93 percent of its full-year sales target already. (From a press release, July 21, 2010) ...

新闻  2010/07/21 更新

urrently building its assembly plant. Mr. Magirius, president of GKN China, said that GKN, which is supplying 100 percent of the driveline systems required by Fiat in Europe, should not miss out on the business opportunity to deal with the automaker in China. As a result, he says the company's next target is naturally the southern region of China. ...

新闻  2010/07/02 更新

n April 1. As temporary tax incentive measures the automobile weight and acquisition taxes will be exempt by fiscal 2011, and the automobile tax will be reduced by 50 percent during the fiscal year following the purchase. The new electric car will go on sale in December 2010, and its domestic sales target in fiscal 2010 is set at 6,000 cars.[Green Vehicles]...

新闻  2010/03/31 更新

Bosal and a Chinese auto parts supplier affiliated to Ningbo Huaxiang Group have signed a Memorandum of Understanding (MOU) to establish a 50:50 joint venture company. The new company will be based in Shanghai and will engage in the manufacture and sale of motor vehicle exhaust systems for the Chinese market. And the target customers will be the Chinese OEMs such as SAIC, FAW, FAW-VW, Shanghai VW and Shanghai GM. (From a press release on March 26...

新闻  2010/03/26 更新

ContiTech inaugurated its development, production and sales facility in Changshu, Jiangsu Province, China, with an investment of almost 40 million euros. Initially, three business units - Air Spring Systems, Fluid Technology and Vibration Control - are commencing operations at this hub. The facility will produce mainly for the Chinese and other Asian markets. The target for ContiTech is to more than double the sales volume in China, boosting it f...

新闻  2010/03/11 更新

Behr Jinan Co., Ltd, Behr's first fully-owned Chinese subsidiary established in February 2009, has started production. From this plant Behr supplies truck maker China National Heavy Duty Truck Group Corporation (CNHTC) with air conditioning components and engine cooling systems. Investments in the facility, to date, amount to about 3 million euros. Behr intends to reach its sales target of over 20 million euros by 2011 at the Chinese unit. (From ...

新闻  2010/02/18 更新