its Commercial Vehicles division. The declared strategic goal is for Grammer to evolve into a full-line supplier in the bus sector as well and to offer integrated solutions enhancing comfortable and safe bus travel. The INNERCITY3000 is a flexible lightweight seat with a total weight of less than 5 kg and a width of under 450 mm for urban transportation. The materials used are resource-saving and recyclable. The P3000 is a fully electronic passen...

Major Suppliers  Updated at: 2025/07/19

WSD Krauss GMBH & CO. KG Germany -Shareholder(s): ORCA the cutting group Shaft Various machining Micromotor housings ...

Search Suppliers  Updated at: 2025/07/18

a carbon fiber reinforced plastic (CFRP) material with a glazed upper section. It is powered by a DPF equipped 2,700cc V6 diesel engine combined with a 6-speed automatic transmission. Compatible with a biodiesel fuel, the car develops a maximum output of 208bhp/4,000rpm and a maximum torque of 44.9kg-m/1,900rpm. By use of the "UrbanHybrid" technology, when the vehicles is traveling at under 6km/h, and the driver's foot is on the brake pedal, the...

OEM Plants  Updated at: 2025/07/18

Pro electric commercial vehicles coming to Europe by 2024. Next-generation battery technology enables a targeted range of 380 km and 125 kW fast charging ability. E-Transit Custom's 400-volt, 74 kWh useable battery pack uses advanced 82 Ah pouch cells. E-Transit Custom delivers payloads up to 1,100 kg, a lower load floor with easier access, and a maximum towing capacity of 2,000 kg. Independent rear suspension and class-leading motor power help d...

OEM Plants  Updated at: 2025/07/18

n is equipped with a 64-kWh battery that powers a 218 hp electric motor and allows it to have a range of up to 302 km. Thanks to the 11-kW charger, the vehicle can be charged in less than 8 hours, while on a 125-kW connection, it will reach 10% to 80% in 39 minutes. Its maximum towing load is 2,000 kg. The PHEV version has a 2.5-liter 4-cylinder gasoline engine, as well as an electric motor powered by a 11.8-kWh battery that allows a range of 52 ...

OEM Plants  Updated at: 2025/07/18

ced for commercial vehicles in China. Developed based on Toyota's second-generation MIRAI fuel cell system, TL Power 100 adopts some China-made parts to match the operating environment of commercial vehicles in China. The localized development in China has accomplished a high power density of 711W/kg, 4.9kW/L (rated power of 101kW) and a durability of 30,000 hours. Toyota Motor's new car sales in China for October 2013 surged 80.6% to 82,400 uni...

OEM Plants  Updated at: 2025/07/18

Energy (SEDCE), the project is crucial for pilot programs and future growth of Sarawak’s hydrogen economy. Currently, hydrogen vehicles in Sarawak are mainly commercial vehicles undergoing trials. According to the Sarawak Deputy Premier, the Toyota Mirai FCEV, for example, can be refueled with 2 kg of hydrogen in 3 minutes, enabling up to 700 km of driving range on a full 5-kg tank. (From Sarawak Deputy Premier social media updates on July 15,...

News  Updated at: 2025/07/18

ebruary 18 to 20. On September 24 Toyota Motor Europe announced that it will present a production model of its iQ EV at the Paris International Motor Show. The new iQ EV is has the overall length of 3,120 mm, overall width of 1,680 mm, height of 1,505 mm and 2,000 mm wheelbase. The iQ EV weighs 125 kg more than a standard iQ , but Toyota says the interior space hasn’t been reduced as the battery is stored under the floor. The iQ EV’s fully el...

OEM Plants  Updated at: 2025/07/18

pe in stages in the spring of 2012. In half a year after the release, a compact sports model "208 GTI" will be added. The "208" comes in two door types; 3-door and 5-door. It is downsized by 10 mm in height and 70 mm in length compared with the current "207." The weight of the base trim level is 975kg, reduced by 110 kg on average. It is installed with a 1.0-1.2-liter 3-cylinder engine with a variable valve-timing mechanism, which is smaller than...

OEM Plants  Updated at: 2025/07/18

d cabriolet, have gone through minor changes at the front of the car, based on the new 508 and the SR1 HEV concept car. At launch in Europe, four petrol (1.4L/1.6L) and four diesel engines (1.6L/2.0L) will be available, all compliant with the Euro5 emission standards. Overall weight reduction by 25 kg on average on all models, fitment of new 16-inch low rolling resistance tires and aerodynamic body with cd of 0.28 have improved fuel efficiency. T...

OEM Plants  Updated at: 2025/07/18

Onvo L90 Jul. 2025 China EV Length 5,145 (202.6) X Width 1,998 (78.7) X Height 1,766 (69.5), Wheelbase 3,110 (122.4) mm(in) Curb weight: 2,250kg (4,960.4lbs) RWD/4WD. Permanent magnet synchronous motor (Max output: 340kW/462.4ps, 440kW/598ps (100kW/136ps + 340kW/462.4ps)) Lithium-ion battery/Lithium-iron phosphate battery (Capacity: 85kWh, Total voltage: 900V, Swappable battery model) A single speed reduction gear China Combined (WLTC mode): 14...

Electric / Autonomous  Updated at: 2025/07/18

vember 7, BYD Co., Ltd. (BYD) launched the Xiaoyun 1.5L high efficiency engine for plug-in hybrid electric vehicles (PHEV). This engine has a maximum power output of 81kW, a peak torque of 135Nm, a compression ratio of 15.5 and a thermal efficiency of 43%. It reduces frictional loss by 10% and is 10kg lighter than its previous model. Its fuel consumption without charging is less than 4L/100km and it meets China 6b emission standards. On November ...

OEM Plants  Updated at: 2025/07/18

ion time of only 4.3 seconds, an NEDC electric-mode range of 216km, an NEDC combined range of 1,030km, and an NEDC fuel consumption of 6.45L/100km at the lowest charge. The plug-in hybrid version of the N8 comes with the DiSus-C intelligent damping body control system, a differential lock, and a 100kg roof loading capacity. The vehicle comes standard with the Denza Pilot Level 2+ intelligent driving assistance system. On August 25, BYD announced ...

OEM Plants  Updated at: 2025/07/18

arelli of Tennessee LLC - Pulaski Plant) Valeo Climate Control - C/o Valeo Lighting Systems India Pvt. Ltd. Valeo India private Limited - Chennai (Formerly (Valeo Engineering Center(India), Lighting Systems, Wiper Systems, Pvt. Ltd) Hella, Inc. USA Valeo Lighting Systems - Chrzanow Hella GmbH & Co. KGaA (FORVIA HELLA) Neolite ZKW Lightings Pvt. Ltd. ZKW Lighting Systems (Dalian) Co., Ltd. Stanley Electric Manufacturing Mexico S.A. de C.V. Marell...

Who Supplies Whom  Updated at: 2025/07/18

OTTO FUCHS Dülken GmbH & Co KG Germany -Shareholder: Otto Fuchs KG Various machining Copper and brass processing ISO14001 ...

Search Suppliers  Updated at: 2025/07/18

l also introduce its development strategy during the Auto Shanghai 2021.  On May 18, the universal DHT (dedicated hybrid transmission) of Chery Holding rolled off the production line, as accurate operations were completed on the automation console. The Chery DHT possesses a torque density of 35Nm/kg and an input torque of 510Nm. Under NEDC conditions, its electric drive efficiency average is higher than 90% and its maximum transmission efficien...

OEM Plants  Updated at: 2025/07/18

3D CORE GmbH & Co. KG Germany Assembly Other insulators Various plastic molding Foaming ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/07/18

1a Leibe GmbH & Co. KG Germany Other interior parts Plastic injection molding Various plastic molding Other exterior parts IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2025/07/18

reorders in Beijing. The Menlo is a model based on GM’s new electric vehicle architecture and is equipped with a new permanent magnet synchronous motor (maximum power output of 110kW, peak torque of 350Nm), mated to a ternary lithium-ion battery (total capacity of 52.5kWh, energy density of 140Wh/kg). The NEDC cruising range is 410km. The power energy consumption is 13.1kW/100km. The vehicle’s battery can be charged to 80% of its full capacit...

OEM Plants  Updated at: 2025/07/18

ZOLLERN GmbH & Co. KG Germany -Zollern Group Headquarters Various forging Gear Various casting Cold forging Various machining Bearing Precision Casting Steel Profiles ISO14001 IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2025/07/18