Hydro and Maxion Wheels supply low-carbon components to Daimler Truck–led reECONIC concept vehicle Norsk Hydro ASA (Hydro) has supplied low-carbon, recycled aluminum made from Hydro CIRCAL to the Daimler Truck reECONIC concept project. The material was used in the Mercedes-Benz Trucks eEconic-based waste collection vehicle. Hydro provided 31 different extruded aluminum parts totaling 600 kg, used in structural and safety-critical applications. ...

News  Updated at: 2026/04/29

Aluminium production remains positive in March 2026, despite concerns over procurement from Middle East According to the Japan Aluminium Association's production and shipment trends for aluminium rolled for March, released on April 27, total production of aluminium sheets and extruded products increased by 6.8% year-on-year to 151,607 tons. Japan imports all of its aluminium ingots. The United Arab Emirates (UAE) is the largest supplier, and impo...

News  Updated at: 2026/04/28

e carmaker’s next generation of EVs. Compared to alternative solutions, the BorgWarner cooling plates provide cooling capacity in a more compact package with reduced weight and cost, and with a design that compensates for assembly tolerances. The battery cooling plates developed by BorgWarner are extruded aluminum profiles that snake between the rows of cylindrical battery cells, conforming closely to their contours, ensuring optimal contact wi...

Major Suppliers  Updated at: 2026/04/16

rt Multi-link rear suspension with torsion beam suspension Rear auxiliary arm Rear control arm Rear control arm assembly Rear link suspension arms Rear lower aluminum control arm Rear lower arm Rear lower arm assembly Rear lower control arm Rear lower control arm (aluminium) Rear lower control arm (Extruded Aluminum Hollow Profile Suspension) Rear suspension airlink Rear suspension arm Rear suspension arm (No.1) Rear suspension arm (Sourced by Au...

Who Supplies Whom  Updated at: 2026/04/16

ne 21 joint development of the high breakdown voltage flat winding wire with Furukawa Magnet Wire Co., Ltd. The new wire is applicable to EV/HV drive motors, which require higher voltage resistance, and has been selected for the Toyota AQUA HV. Based on the high heat-resistant enamel wire coated by extruded resin, this high voltage-resistant flat wire has achieved a highly flexible insulated layer. As this does not require the interphase insulati...

Major Suppliers  Updated at: 2026/04/10

Other transmission parts Turbocharger parts Various casting Bumper parts Lithium-ion battery anode current collector Pipe/Tube (Hard) Bumper Various forging Compressor Wheel Roof Rail Aluminum alloy plate for a car panel Aluminum alloy plate for a Li battery cell case Pneumatic dexterous precision extruded aluminum material Aluminum foil for lithium-ion secondary battery Mazda Toyota Land Cruiser Roadster Roadster RF Aluminum door Door panel alu...

Search Suppliers  Updated at: 2026/02/20

L:https://thinktank.toyota-td.jp/pub/list Patent Publication Number: JP 2023-537494 Applicant: Tesla Inc.  This technology is a system and method for manufacturing the front and rear frame sections of an automobile body structure, which have traditionally been made by joining multiple pressed and extruded parts together using welding or other methods, as a huge, single "integral energy-absorbing casting." This system uses a high-pressure die-ca...

Market & Tech Reports  Updated at: 2026/02/12

. (From a press release on May 28, 2008)    Toyoda Gosei announced that it will strengthen the business structure of Toyoda Gosei Private Limited (TGIN), its subsidiary in India. While it used to be engaged in only final molding in its rubber sealing operation by importing half-finished products (extruded components) from Japan, TGIN is planning to introduce new production processes from material blending to extrusion in order to conduct a comp...

Major Suppliers  Updated at: 2026/02/09

thermal resistance substrate for SMD -Installed Vehicle: Toyota "Prius" - Brake accumulator for hybrid vehicles. Uses hydroformed S-shaped metal bellows. - Except for bolts, all components including brackets are aluminum, achieving a 35% weight reduction. - Using mostly extruded parts, the frame is assembled with aluminum arc welding and spot welding. - Arrangement of many small leaf springs on sheet-like plate. Anti...

Major Suppliers  Updated at: 2026/02/09

part that absorbs impact energy with a high-strength part. Integral forming by hot stamping reduces the number of parts from 7 to 1. This contributes to cost reduction. Center pillar: Under development 2nd cross member reinforcement: for Nissan Note The front member is made of deformation-resistant extruded aluminum and the housing is made of die-cast aluminum. Joining techniques suitable for each material combination are used. Green: Al resistan...

Major Suppliers  Updated at: 2026/02/03

he surface area is increased, improving heat dissipation while also ensuring strength. The use of aluminum and other materials also makes it possible to reduce weight. - Boss-shaped heat sink - Fin-shaped heat sink Heat sinks providing both strength and heat dissipation. Production experience with extruded profiles (EP) in both round and square cross-sections. ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/02/02

Limited Electromechanical components Sundaram Brake Linings Limited Brake linings and clutch facings Sundaram-Clayton Limited Aluminum die castings Sundaram Dynacast Private Limited Die cast components Sundram Fasteners Limited Fasteners Sundaram Industries Limited (TVS Rubber) Molded and extruded rubber Turbo Energy Limited Turbochargers TVS Srichakra Limited Tires and Tubes for Two & Three-wheelers in India TVS Argomm Pvt Ltd O-...

Major Suppliers  Updated at: 2026/01/08

her value-added modules Elastomers(Emerging businesses) Door grommets Pads & bushes Gaskets & O-rings NVH components Vibration mounts Suspension bushes Rubber to metal bonded parts Large engine gaskets Rubber to plastic bonded parts Reinforced hoses Drain tubes Fuel hoses Engine cooling hoses Extruded rubber profiles Weather strips Glass run Boot and hood seals Calendared sheets Precision Metals & Modules(Emerging businesses) HVAC sys...

Major Suppliers  Updated at: 2026/01/07

rength Aluminum Alloy "SHORIK" Low thermal expansion and High Strength Aluminum Alloy Highly functional resin material Highly functional resin material Piston Products Light Weight Material Technology High Performance Material Technology Cast Iron Parts Piston Rings Seal Ring Technologies Seal ring Extruded material of aluminum powdered alloy Cast Iron Parts Steering Knuckle Aluminum Vanes Pulley Seal Rings for CVT Rotation Seal Rings for AT and ...

Major Suppliers  Updated at: 2025/12/16

STEP-G ST Extruded Products Germany GmbH- bonn Germany -Shareholder(s): Sankyo Tateyama, lnc. Welding Various forging Aluminum extrusion processing Assembly ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/12/01

ST Extruded Products Germany GmbH (Formerly Aleris Extruded Products Germany GmbH) Germany -Shareholder(s): Sankyo Tateyama, lnc. Shock absorber Motorcycle parts Welding Bumper Other suspension parts Roof rail Aluminum extrusion processing Body panel Commercial vehicle parts Truck side rails Rear spoilers Roof rails Precision machining Battery frame member for EV ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/12/01

STEP-G ST Extruded Products Germany GmbH - Hettstedt Germany -Shareholder(s): Sankyo Tateyama, lnc. Various machining Aluminum casting ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/12/01

ate Transmission oil pump part Transmission gear part ABS sensor gear Shock absorber part Electric power steering part Motor bearings Oilless bearing) Dust core material for motor cores Composite soft magnetic material Lead-free alloy AT seal CVT seal Wear-resistant alloy for sliding parts Aluminum extruded product for bumpers Aluminum extruded multi-hole pipe for Heat exchanger Aluminum plate for radiator Lip seal for air conditioner Radio wave ...

Search Suppliers  Updated at: 2025/11/17

t Manifold HVAC Exhaust components Lightweight HVAC for Micro Cars Heat Exchange Solution Compressor Battery cooling plate Battery cooling plate Products of Sanden Vikas (India) Ltd. Snake tube is used to cool battery cells by touching cell surface in electric vehicle. Snake tube is made by extruded channel tube. It is made by sheet metal processes. IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/11/11

TVS Upasana Ltd. - Cold Extruded parts Division India -Group: Sundram Fasteners Limited Hot forging Heat treatment Various machining Other steering parts ...

Search Suppliers  Updated at: 2025/11/03