Basquevolt, Spain receives grant from EIC for solid-state battery electrolyte technology research On July 17, Basquevolt announced that it has been awarded an ERU 2.5 million grant by the European Innovation Council (EIC) Accelerator program, with the possibility of an additional EUR 10 million equity investment in the next capital raising round.  Chosen among 40 companies out of 1,000 applicants, Basquevolt’s selection validates its potential...

News  Updated at: 2025/07/18

ant, aiming for full-scale operation in 2030. The stationary power generation system uses solid oxide fuel cells (SOFC), in which Nissan has development experience in automotive use.  SOFCs can generate power using a variety of fuels, including ethanol, natural gas, and LP gas. Compared to polymer electrolyte fuel cells (PEFCs) which have a power generation efficiency of 60%, Nissan’s SOFCs are said to achieve a higher efficiency of 70%. Nissa...

OEM Plants  Updated at: 2025/07/17

i-corrosion protection measures. -For integration into a battery storage system of up to a system voltage of 800V -For integration into a battery storage system of up to a system voltage of 400V -Flexible circuit based signal carrier allowing remarkably reduced module height. -335 cell PEM (polymer electrolyte membrane) stack module based on metallic bipolar plates with a power output of 76 kW. Validated according to IEC 62282-2 and GB/T 33978. -...

Major Suppliers  Updated at: 2025/07/17

Lithium-ion battery cell (Prismatic) (5,001W/kg) Lithium-ion battery cell (EHW5) Rechargeable battery SCiB module Nickel-metal hydride battery cell Nickel-metal hydride battery Lithium-ion battery cell (Pouch) (9.2kWh) NMC battery cell (Prismatic) NCMA battery cell Separator for lithium-ion battery Electrolyte for lithium-ion battery Lithium-ion battery module (EHW5) Three-dimensional lithium-ion battery cell (Pouch) Cobalt free NMX battery cell ...

Who Supplies Whom  Updated at: 2025/07/17

ctrolyzing water. The equipment will be put into operation before long at a DENSO Fukushima Corporation plant in Tamura City, Fukushima Prefecture. Toyota aims to build a model for the local consumption of locally produced hydrogen. The new electrolysis equipment was developed utilizing the polymer electrolyte fuel cell (FC) stack from the Mirai fuel cell vehicle (FCV). By turning power generation from the FC stack the other way, water inside the...

Major Suppliers  Updated at: 2025/07/14

Passenger airbag Wiper arm Blind spot monitor sensor Modular headliner Compressor bracket 8 speaker audio system Fuel filler Door handle Door latch 18 speaker audio system Front door watershield Overhead system Fluid tube Instrument panel Reducer sun gear Head lamp Passenger seat Oil pump fastener Electrolyte for lithium-ion battery Transmission fastener Door panel Driver seat Rear door watershield Driver frontal airbag gas generator Passenger f...

Who Supplies Whom  Updated at: 2025/07/11

ss release on April 8, 2014) On June 16, 2014, A123 Systems, a wholly owned subsidiary of Wanxiang Qianchao Co., Ltd., completed the transactions to acquire battery-related technology from Leyden Energy. Leyden's intellectual property in battery materials covering lithium titanate and non-flammable electrolyte technologies is expected to complement A123's expertise in lithium iron phosphate (LFP), a nano-scale material. As part of the deal, key t...

Major Suppliers  Updated at: 2025/07/08

atform, by the end of 2022. 100% of them will have to meet ACC's CSR requirements for the BBD1 plant's start of production by the second half of 2023. For materials considered as priorities on sustainability issues such as cathode active material – the NMC, anode active material – the graphite, electrolyte, copper, or aluminum, the chosen suppliers will need to be at least awarded an EcoVadis gold medal by 2025. EcoVadis also supports ACC in ...

OEM Plants  Updated at: 2025/07/07

atform, by the end of 2022. 100% of them will have to meet ACC's CSR requirements for the BBD1 plant's start of production by the second half of 2023. For materials considered as priorities on sustainability issues such as cathode active material – the NMC, anode active material – the graphite, electrolyte, copper, or aluminum, the chosen suppliers will need to be at least awarded an EcoVadis gold medal by 2025. EcoVadis also supports ACC in ...

OEM Plants  Updated at: 2025/07/07

state batteries for electric vehicles (EVs) in 2027-2028. At the Teiho Plant, the process development site and a part of the planned mass production methods were made public. In an all-solid-state battery, ions move through the solid, so ideally the negative electrode, positive electrode, and solid electrolyte layers are in close contact with each other without any gaps. According to the announcement, Toyota has achieved high-speed, high-precisio...

OEM Plants  Updated at: 2025/07/07

e) Battery sensor (Sourced by Automobilwoche) Rocker energy absorption material Electricity supply unit (ESU) crossmember Battery center plate for BEV Battery end plate for BEV Battery diagnostic module Pulse transformer for battery management system (via Calsonic Kansei Corporation) Battery sensor Electrolyte for lithium-ion battery Separator for lithium-ion battery High-voltage battery flood port 12V battery cabin bracket Battery rapid splitter...

Who Supplies Whom  Updated at: 2025/07/04

Jyoti Rubber Industries India O-ring Gasket Various rubber processing Fuel cell electrolyte membrane Seal Grommet IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2025/07/03

Idemitsu Kosan to strengthen production capacity for solid-state electrolytes Idemitsu Kosan Co., Ltd. (Idemitsu Kosan) announced on June 30 that it will increase annual production capacity for sulfide solid electrolytes, an all-solid-state battery material, to several dozen tons at its Advanced Technology Research Laboratories’ Plant 2 small pilot facilities (Sodegaura City, Chiba Prefecture). The company will invest about JPY 1.1 billion to s...

News  Updated at: 2025/07/02

RJC Holdings Corporation Korea Various Electrical / Electronic parts Lithium-ion battery separator Lithium-ion battery electrolyte Anode materials / plates for lithium-ion battery Aluminum cell pouch insulator Can - Cylindrical Prismatic Lead Tap - Cathode & Anode ...

Search Suppliers  Updated at: 2025/06/30

o 0V and temperatures returned to ambient temperature without fire or explosion. GAC Aion’s magazine battery 2.0 technology applies a nano-ceramic heat-resistant layer to significantly reduce the probability of short-circuiting, as well as composite current collector materials and flame retardant electrolyte, which can reduce the heating rate of the battery cells by 20% even if thermal runaway occurs. The technology adopts heat-resistant phase-...

OEM Plants  Updated at: 2025/06/27

l rules. -Amendment of Annexes 1, 3, 5, 6 and 7. 9 Agreement regarding UN/ECE regulation 95 03 2010/123 2011/11/16 2011/6/23 Protection of the occupants in the event of a lateral collision Test procedures for protection of occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added. 03 C1 2011/70 Adopted proposal regarding UN/ECE regulation...

Regulations  Updated at: 2025/06/24

Daramic Xiangyang Battery Separator Co., Ltd. China -Shareholder：Polypore Hong Kong, Limited 65%, Camel Group Co., Ltd. 35% Fuel cell electrolyte membrane ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/06/23

2020/8/28 Table of amended FMVSS (Oct. 2019) Click here to take a look at "how to access the latest developments in FMVSS".   Current FMVSS # Federal Register Issuing date ofFederal Register Title Description Effective date 1 PART 571.305 84FR44257 2019/8/23 Electric-Powered Vehicles: Electrolyte Spillage Electrical Shock Protection GPO's Federal Digital System 2019/8/23 Table of amended FMVSS (Jun. 2018) Click here...

Regulations  Updated at: 2025/06/20

® Expand - Top covers made of Ultramid® composite - Elastoflex® insulation pads - Elastan® filling material (side beam cavities) - HED™ cathode material, etc.   This is a next-generation battery that significantly improves safety, energy density, and charging efficiency. By using a solid electrolyte, "solid-state batteries" significantly reduce the risk of leakage and fire that is common in conventional lithium-ion batteries. In additi...

Market & Tech Reports  Updated at: 2025/06/19

ime AWD "Quattro" Audi has debuted the Q5HFC hybrid fuel-cell concept at the 11th Michelin Challenge Bibendumin held in Berlin. The drive is provided by two electric motors; the motors produce a combined peak torque of 420 Nm. The lithium-ion battery has an energy content of 1.3 kWh and the polymer electrolyte membrane (PEM) fuel cell outputs 133 hp. There are two high-pressure cylinders that store hydrogen at 700 bar. Audi announced on December ...

OEM Plants  Updated at: 2025/06/18