60 km / 100 miles on a single charge. The BMW Group announced production of an electric vehicle at its plant in Leipzig by use of carbon fiber to reduce the vehicle weight. Its joint venture, "SGL Automotive Fibers GmbH" will produce carbon fiber fabrics at the Wackersdorf plant for processing into CFRP (Carbon Fiber Reinforced Plastic) components at the Landshut plant. BMW is aiming to mass produce an electric vehicle known by its project name o...

OEM Plants  Updated at: 2025/12/18

itive manufacturing, especially for creating moulds for aluminum cylinder heads using sand casting. This process enables the creation of complex structures filled with liquefied aluminum. The Lightweight Construction and Technology Centre in Landshut uses a 120-kilogram 3D-printed robot gripper for CFRP roof production. This gripper, lighter by 20%, extends robot life, reduces system wear, and cuts maintenance. It combines selective laser sinteri...

OEM Plants  Updated at: 2025/12/18

r finisher Center fascia bracket Console front panel Center console cubby holder 2nd row console trim Center tunnel trim Center console sliding lid Rear console cushion close panel Large tow carbon fiber for center console reinforcement Large tow carbon fiber fabric for center console reinforcement CFRP for center console reinforcement Surface materials (SUNVIEO thermoplastic vulcanizate) for armrest Console with armrest Center console soft trim ...

Who Supplies Whom  Updated at: 2025/12/18

ced by Automobilwoche) Side member (Sourced by Automobilwoche) Side member reinforcement (Sourced by Automobilwoche) Front chassis hole cover Cab bracket Tilt door opening and closing assist device Chassis structure Extension front side member Side sill inner panel Aluminum alloy for rear side sill CFRP for rocker panel Body chassis system 6000 series (Al-Mg-Si) for side sill Rear tunnel top Front floor frame Rear side member assemly Side member ...

Who Supplies Whom  Updated at: 2025/12/18

SGL Carbon SE (SGL Group) Germany ■株主：SKion GmbH: 28.5% , BMW Group: 18.44%, VW Group: 7.41% Synchronizer ring Brake disc Other drive motor parts Water pump Vibration / Acoustic insulator Gasket Chassis / Frame Fuel pump parts Body panel Commercial vehicle parts Battery case Leaf spring Fuel cell system parts Carbon-ceramic brake disk Fiberglass leaf spring JEC World 2022 CFRP sideframe of BMW iX made of SIGRATEX stacks Composite batt...

Search Suppliers  Updated at: 2025/12/17

Honda transfers the Company’s stock to the Motherson Group, the voting rights of the Motherson Group are forecast to be 81%, while the voting rights of Honda are forecast to be 19%. Sunroofs Fuel TanksPlastic fuel tanksSteel fuel tanksHydrogen tanks for FCVs Plastic partsBumpersInstrument panels CFRP Products Sale to the Motherson Group by Honda July 2023 Honda announced that it will sell Yachiyo Industry, a consolidated subsidiary, to the ...

Major Suppliers  Updated at: 2025/12/11

es   Toyoda Gosei exhibited a high-pressure hydrogen tank for the Toyota Mirai.   A cutaway model of a high pressure hydrogen tank manufactured by Toyoda Gosei Co., Ltd. (Toyoda Gosei) at a pressure of 70MPa (approx. 700 atmospheres) was shown, in which a layer of carbon fiber reinforced plastic (CFRP) is wrapped around a resin liner to ensure pressure resistance and strength. High-pressure hydrogen tank for FCEVs Cutaway model of a high...

Market & Tech Reports  Updated at: 2025/12/11

se liner Rear wheelhouse cross sill Wheel trim Rear wheel house panel Front wheelhouse panel assembly Steel wheel for temporary tire (18 inch) Carbon fiber wheel(23 inch) Steel wheel (19 inch) Wheels Rear wheel hub Assembly Rear wheel seal Spare wheel Rear wheel arch Wheel (16 inch) Magnesium wheel CFRP rim wheel (optional) Carbon fiber wheel (option) 1.5T 1.8T 1.6T 2.9T 6AMT 5MT 5AMT 8AT Asahi Tec Corporation Asahi Tec Aluminium (Thailand) Co....

Who Supplies Whom  Updated at: 2025/12/11

s for lithium-ion battery Film Lithium-ion battery separator Lithium-ion battery electrolyte Tape (TPS) Polyvinyl Chloride Compound Thermoplastic Elastomer Plastic compound OLED Lighting Biopolycarbonate resins Chemicals & Plastics Fibers Carbon Fibers Carbon Fiber Reinforced Thermoplastics (CFRTP) Carbon Fiber Reinforced Plastics (CFRP) Gas Diffusion Layer Sheet molding compound (SMC) Thermoplastic Styrenic Elastomer Mazda Suzuki Mazda3 Fastback...

Search Suppliers  Updated at: 2025/12/09

show car combines a 1,111 kilograms total weight with a 2.0 TFSI engine delivering 228 kW (310 hp) and 400 Nm. The TT ultra quattro concept is catapulted in 4.2 seconds to 100 km/h (62.14 mph). The engineers from Ingolstadt and Neckarsulm fine-tuned the body frame in the current TT generation with CFRP, shedding another 43 kilograms from the body structure. Together with the optimized detachable body parts, the result is a weight saving of 100 k...

OEM Plants  Updated at: 2025/12/09

show car combines a 1,111 kilograms total weight with a 2.0 TFSI engine delivering 228 kW (310 hp) and 400 Nm. The TT ultra quattro concept is catapulted in 4.2 seconds to 100 km/h (62.14 mph). The engineers from Ingolstadt and Neckarsulm fine-tuned the body frame in the current TT generation with CFRP, shedding another 43 kilograms from the body structure. Together with the optimized detachable body parts, the result is a weight saving of 100 k...

OEM Plants  Updated at: 2025/12/09

r for Toyota Safety Sense P Millimeter-wave radar for Toyota Safety Sense P Visconti 2 image recognition processor for front view camera Cathode material (lithium nickel oxide) for lithium-ion battery Electric power steering Steering wheel Steering linkage One-way clutch for dual motor drive system CFRP rear hatch Heat-pump air conditioner Brake disc rotor Brake shoe ABS ESC Hub bearing unit Engine mount Plastic bumper Rear roof spoiler Radiator ...

Who Supplies Whom  Updated at: 2025/12/08

Ratio (%) Taiho Kogyo Co., Ltd. 100.0 Gaskets for cylinder head-Metal gaskets for cylinder head-Paper-made sheet gasketsExhaust manifold gaskets/Turbocharger gaskets-Metal gaskets Exhaust manifold gaskets Turbocharger gaskets -Paper-made sheet gaskets Exhaust manifold gaskets Resin gears/CFRP-Resin gears-Insulation plates, washers-Clutch facingsFuel-cell-battery parts-Terminals for fuel-cell batteries equipped on the Toyota Mirai-Graph...

Major Suppliers  Updated at: 2025/12/03

in April. It is reported that the cabriolet will go on sale in the U.S. in June, and the coupe in summer. In the U.K., both models will be launched in September. The new "M6" is a high performance model of the new "6 series." To reduce vehicle weight, the coupe uses carbon fiber reinforced plastic (CFRP) for the roof, aluminum for doors and hood, thermoplastic for side panels, and glass fiber compound called sheet molding compound for the trunk a...

OEM Plants  Updated at: 2025/12/01

procurement Korea Zinc Company, Ltd., Korea September 2023, investments in nickel procurement and mine development. Korea Zinc Company, Ltd., Korea September 2023, MOU for nickel procurement, compliant with IRA requirements from 2026. Toray Industries, Inc., Japan May 2024, joint development of CFRP parts. Next-generation battery Ionic Materials Inc., USA July 2018, all solid-state battery solid electrolytes, funded by Hyundai CRADLE. SES...

Market & Tech Reports  Updated at: 2025/12/01

Suvarna Fibrotech Pvt. Ltd. India Front grille Radiator fan shroud Air duct Fender / Wheelhouse panel parts Hood Cabin air filter Bumper Molding (exterior) Various plastic molding Commercial vehicle parts Vacuum forming FRP molding CFRP molding SMC molding RTM molding IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/11/28

osing door system Door panel module Tailgate outside and inner panel Door panel foil Inner door panel Front Door Assembly Tail door panel Front door inner panel (Sourced by MUNRO & ASSOCIATES, USA) Liftgate release handle (Sourced by MUNRO & ASSOCIATES, USA) Thermoplastic liftgate Liftgate applique CFRP rear hatch L99DZ80 analog ASSP (Application Specific Standard Product) L99PM62 system basis chip (SBC) Carbon fiber SMC (Sheet Molding Compound) ...

Who Supplies Whom  Updated at: 2025/11/28

wo-seater PHV has a fuel consumption of 0.9 liters/100km and CO2 emissions of just 21g/km. It can cruise with a range of up to 50km in all-electric mode and up to 500km in combined one. The XL1 is 3,888 mm long, 1,665 mm wide and just 1,153 mm tall. Its aerodynamics are extraordinary Cd 0.189. With CFRP used on its monocoque and part of the exterior, it weighs 795 kg. XL1 will be produced by handcrafting-like methods at the Osnabrück plant in Ge...

OEM Plants  Updated at: 2025/11/27

BMW AG, Landshut Plant Engine parts, Interior & Exterior components, CPRF parts, shafts, special engines, exchange engines, aluminum casting parts, Cockpits; Electric motors and a range extender, and motor gear units for BMW i & MINI, electric drive modules, body parts from CFRP and aluminium; Electric drive housing for iX3 & iX5 Hydrogen; Hydrogen-electric drive train for BMW i Hydrogen NEXT (2022-); Aluminum housing for electric drive units (20...

OEM Plants  Updated at: 2025/11/27

2 and energy consumption generated in plating processes Taiho Kogyo Co., Ltd's second quarter results (cumulative) Taiho Kogyo develops compact production line for engine bearings Six Toyota Group medium size parts makers see operating profit decrease in FY 2018 Taiho Kogyo subsidiary develops CFRP technology that uses recycled carbon fiber Taiho Kogyo develops Vision 2025 and new medium-term management plan Taiho Kogyo to exhibit electrific...

Major Suppliers  Updated at: 2025/11/27