fered hands-free Super Cruise driving assistant will not be functional from the vehicle’s launch. All 2023 Cadillac Lyriq models ordered with Super Cruise will be delivered with hardware installed for the next-gen Super Cruise system, including exterior radar sensors and cameras, and Super Cruise steering wheel, but GM will activate the feature through an over-the-air software update in the near future. The 2023 Cadillac Lyriq Debut Edtion bega...

OEM Plants  Updated at: 2025/09/26

SFC Solutions India Fluid Pvt. Ltd. - Pune Plant (Formerly Cooper Standard Automotive India Pvt. Ltd.) India -Shareholder(s): Mutares SE & Co. KGaA Heater hose Steering hose Radiator hose Brake hose Rubber extrusion processing ...

Search Suppliers  Updated at: 2025/09/25

til the end of the year, and shifts will be extended to nine hours. Some unions have raised concerns over the increased workload. On February 8 Daimler announced that its Mercedes-Benz Vito commercial van will be adopted for London Black Cabs. The vehicles will be modified with a special rear wheel steering device to meet a requirement for a turning radius of less than 25 feet (7.62 m) to enable passenger pickup at hotels. Vito have been used as ...

OEM Plants  Updated at: 2025/09/25

ZF expands steering system production at Zhangjiagang campus in China ZF Group signed an investment agreement with the Zhangjiagang Economic Development Zone to expand production of Active Kinematics Control (AKC) and Steer-by-Wire (SbW) at its Zhangjiagang campus in east China. ZF will use an existing plant area approximately 6,900 sqm to increase annual production capacity of AKC products from 400,000 to 600,000 sets, while SbW capacity will re...

News  Updated at: 2025/09/25

Kyowa Industrial Co., Ltd. Japan Peripheral engine parts Suspension ball joint Other automatic transmission parts Steering linkage Steering shaft Other manual transmission parts Various machining Propeller Tube Ball-joint Air Conditioner Compressor Parts ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/09/25

Saddles International Automotive and Aviation Interiors Private Limited - Pune India -Shareholder(s): Samvardhana Motherson International Limited Other seat parts Other interior parts Seat covers Gear knob covers Steering wheel covers Door trim covers IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/09/25

primarily through the development of innovative materials with leather-like properties. The BMW Group is thus serving the demand for vegan and leather-free interiors, which is set to increase further soon, especially in the US, China, and Europe. It will also be possible to use these materials for steering wheel surfaces. Replacing raw materials of animal origin makes a significant contribution to increasing sustainability in vehicle production....

OEM Plants  Updated at: 2025/09/25

with intelligent algorithms, will be first applied to the IM L6 electric vehicle to be launched in May. On April 8, IM Motors, an SAIC Motor sub-brand, unveiled and started accepting pre-orders for the new IM L6 intelligent electric sedan. With a Lingxi digital chassis and an intelligent four-wheel steering system. Based on a quasi-900V silicon carbide platform and equipped with an ultra-fast charging semi-solid state battery, the IM L6 delivers ...

OEM Plants  Updated at: 2025/09/25

Asahi Metal Ind. Co., Ltd. Japan -Group: Osaka Sanitary Group Various machining Valve Other steering parts Motorcycle parts Assembly Shock absorber parts Other suspension parts Power steering parts Tire valves Harness parts ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/09/25

ing (AEB). On September 26, Chery Automobile Co., Ltd. (Chery) launched the Arizzo 8 compact sedan. The Arizzo 8 is built on Chery’s new sedan platform. It adopts a front-engine, front-wheel-drive layout. It consumes 6.5L of fuel per 100km. The vehicle has standard features such as electric power steering (EPS) with electric parking brake (EPB). Some versions have optional features such as an adaptive cruise control (ACC) system, a driver monit...

OEM Plants  Updated at: 2025/09/25

Side impact beam Other seat parts Door module Other brake parts Other fuel tank parts Blow molding Jack Roll forming Assembly Door panel parts Various stampings Tailored blank Welding Filler pipe Cross car beam Plastic injection molding Filler neck Heat treatment Pipe/Tube (Hard) Bumper beam Power steering reservoir tank Body side panel parts Front end module Paint coating Plating Fuel leveling valve Fuel shut one-way valve Fuel filler cap Fuel ...

Search Suppliers  Updated at: 2025/09/25

wertrain includes a 2.0L turbocharged engine with a maximum power output of 288kW. It is also supported by a 4WD system. All versions of the new S60 are equipped with the City Safety system. Additionally, the vehicle also features such intelligent driving assistance functions as the Pilot Assist (a steering assistance function) and ACC (adaptive cruise control). On December 12, Volvo Cars held an event in Shanghai for the launch of its next-gener...

OEM Plants  Updated at: 2025/09/25

s Level 4 Autonomous Driving technology. The SuperVAN is built with Farizon’s GMA drive-by-wire intelligent architecture and adopts a modular design that realizes free variation of wheelbase and front and rear overhangs as well as free matching of powertrain, braking system, suspension system and steering system. The battery electric model of the SuperVAN will be launched first, with battery swappable, Leishen hybrid and methanol-powered extend...

OEM Plants  Updated at: 2025/09/25

ASTEER Co., Ltd. - Kyushu Plant Japan Other fuel tank parts Various stampings Door panel parts Welding Filler pipe Cross car beam Filler neck Bumper beam Heat treatment Body side panel parts Power steering reservoir tank Plating Paint coating Assembly Side impact beam Other seat parts ISO14001 IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2025/09/25

Naxnova Technologies Private Limited India -Group: Astarc Group Blind Spot Warning (BSW) Other steering parts Motorcycle parts Various sensors Other battery related parts PTC heater parts Instrument panel Various instrument switches Other driving support system parts Display parts Integrated thermal management system for EV Camera Monitoring System (CMS) Parking assist Other meters parts Room lamp Emblem Various lamps Other interior parts Trunk ...

Search Suppliers  Updated at: 2025/09/25

ASTEER Co., Ltd. Japan Various stampings Commercial vehicle parts Other brake parts Door panel parts Blow molding Jack Roll forming Welding Filler pipe Cross car beam Filler neck Tailored blank Plastic injection molding Heat treatment Bumper beam Plating Assembly Body side panel parts Pipe/Tube (Hard) Door Power steering reservoir tank Paint coating Window frame Side impact beam Other seat parts Front end module Other fuel tank parts Fuel level...

Search Suppliers  Updated at: 2025/09/25

Minda VAST Access Systems Pvt. Ltd. (Formerly, Minda Valeo Security Systems, Pvt. Ltd.) India -Shareholder(s): Spark Minda Group 50%, VAST Group 50% Door lock Welding Key set Keyless entry system Various die casting Plastic injection molding Immobilizer Assembly Various machining Steering lock Inside handle Outside handle Various stampings Various Electrical / Electronic parts Commercial vehicle parts Maruti Suzuki Tata Mahindra Skoda Ford Volk...

Search Suppliers  Updated at: 2025/09/25

Mahindra Electrical Steel Private Limited (Formerly Mahindra Systech) India -Shareholders: Mahindra & Mahindra Ltd., -Signed a global alliance agreement withn CIE Automotive (Spain) in Jun., 2013 Engine bearing cap Other brake parts Magnet Various forging Transmission gear Other clutch parts Turbo housing Chassis / Frame Other manual transmission parts Fuel tank Steering knuckle Control arm Commercial vehicle parts Body panel Exhaust manifold Va...

Search Suppliers  Updated at: 2025/09/25

Mahabal Auto Ancillaries Pvt. Ltd- Pune India -Shareholder(s): Mahabal Group Front axle module Various die casting Brake drum Turbo housing Cylinder head Wheel hub Engine pulley Heat treatment Various machining Balance shaft Flywheel Various casting Commercial vehicle parts Brake disc Exhaust manifold Shaft Steering joint Intake manifold Welding Sleeves ISO14001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/09/25

22 advanced lightweight materials and processes for the first time. 25 advanced lightweight materials and processes were applied to the models already in the market as of 2022, and 15 models which were launched in 2022 have adopted lightweight materials for aluminium alloy front anti-collision beam steering knuckles. The weights of the ultrafine fiber soundproof pad and high-pressure vacuum die casting aluminum alloy damping tower are reduced by ...

OEM Plants  Updated at: 2025/09/25