Nissan Motor Iberica, Avila Plant Stamped parts (Suspension frame, Replacement Bumper (for Nissan))(2022-); Nissan NT400/Cabstar/Renault Trucks Maxity EV (-2021); Nissan Atleon (-2013), NT500 (2013-2016); Stamping Plant , Conversion from Truck Assembly to Stamped Parts Manufacturing - Number of Employees: 475 (as of June 2024) - Investment:   2021-2024: EUR 10.5 million to strengthen the plant’s production and logistics capabilities.   ...

OEM Plants  Updated at: 2025/12/18

on March 5, it has expanded its portfolio of CNG/LPG product offerings. The new Transit and Transit Connect range will add CNG/LPG models when it goes on sale later 2013. 2013MY Ford Super Duty pickups, E-Series vans and medium-duty F-Series variants are offering factory-prepped engines for CNG/LPG conversion. Ford and Navistar reported in the fiscal year 2012 statement of accounts, they are terminating the Blue Diamond Truck joint venture effect...

OEM Plants  Updated at: 2025/12/18

equipment.   As for the motor, it is an SPM (surface permanent magnet synchronous motor) with a maximum output of 1kW, a maximum torque of 5Nm/10Nm, and a maximum speed of 5000 rpm, with built-in driver circuitry and control software.   External commands are received via CAN communication, and a conversion box is required to connect to a cloud system for intelligent operation. General-purpose smart motor General-purpose smart motor disp...

Market & Tech Reports  Updated at: 2025/12/17

the current production of compact car models at the site. On September 21, Mercedes Benz announced that its Rastatt plant will start producing the MMA platform in the mid of 2020s after renovating assembly hall 4.0, embracing a "digital first" approach. The digital transformation enabled the swift conversion of the production line without disrupting the current compact model production. Over 400 km of cable were laid, and the virtual conversion ...

OEM Plants  Updated at: 2025/12/17

n GAC Group’s ADiGO autopilot system, which will be adopted in several models including the AION LX battery electric SUV. With new 2D MEMS smart chips, RoboSense’ second-generation smart zoom LiDAR can provide an intelligently adjusted resolution of 0.2-0.05 degrees, an intelligent frequency conversion refresh rate of 10-30Hz, a 120-degree FOV (field of view) and a detection range of 300 meters, with dimensions of only 45*110*108mm....

OEM Plants  Updated at: 2025/12/17

-segment hybrid SUVs- Sevilla plant: two new electric gearboxes On July 13, Invest in Spain announced that the Renault plant in Seville, recently converted into the new refactory concept, has been awarded the DB35 gearbox. Added to the two gearboxes awarded in March 2021, it represents the de facto conversion of this facility into the world production center for hybrid gearboxes of the Renault group. The DB35 gearbox will be assembled in the hybr...

OEM Plants  Updated at: 2025/12/17

CES 2024 that it will launch the PV5, a mid-size Platform Beyond Vehicle (PBV) model in 2025 and will fully develop its PBV business. The PV5 is Kia's first PBV model and will be produced at the EVO Plant, which is scheduled to begin operations in 2025 at the Hwaseong plant. The PV5 will feature a conversion function that allows drivers to swap modules to suit their purposes, such as vehicle dispatch, delivery, and utility. Kia also announced at...

OEM Plants  Updated at: 2025/12/17

nergy Storage)      • Formerly a joint venture with SK On, the plant is now wholly owned by Ford.      • As it shifts production from EV batteries to battery energy storage systems as part of a new business, it will add around 2,100 jobs, and require about USD 2 billion investment for the conversion.      • The plant will now produce lithium iron phosphate (LFP) prismatic cells, battery energy storage system modules, and 20-foot DC...

News  Updated at: 2025/12/17

23, digital data will also be available for the BMW Group plants in Mexico, South Africa, the UK, and Dadong, China. According to the CDP Climate Change Questionnaire 2021submitted by BMW, in BMW Group’s paint shop in Munich (Germany), the Company redused the air sink rate and changed the airlock conversion function from fresh air to recirculated air. These reduces natural gas consumption by about 2,000 MWh/1,200 MWh respectively, and electrici...

OEM Plants  Updated at: 2025/12/16

and battery safety. Falcon ADAS Horizon's Journey 6P and multi-sensor fusion solutions are already being used in several production models. Kunpeng Sky Optimus The thermal efficiency of the engine is over 48%, and when combined with the "Golden Range Extender" system, the oil-to-electricity conversion efficiency can exceed 4.0kWh/L. Furthermore, the high-efficiency turbocharger on board has a maximum efficiency of over 60%. ...

Market & Tech Reports  Updated at: 2025/12/16

optimal approach for each facility outside Japan. The first focuses on energy conservation efforts during the vehicle manufacturing process, which emits large amounts of CO2. These include reduction of thermal energy through the development of low-temperature curing paints and improvement of energy conversion efficiency by optimizing processing technology. Regarding the second initiative, Mazda will participate proactively in efforts of the Carbo...

OEM Plants  Updated at: 2025/12/16

6. Reported in detail in the next section. Body work The same platform as above is specially fitted with a body for leisure use. Reported in detail in the next section. Route bus Specially equipped for mass-production J6 Living Car Equipment for living ー The vehicle is commercially available. Conversion of 2-door route bus to 1-door motorhome. On sale now J7 2-door non-step flat floor ー Commercially available. K8 2-door non-step flat ...

Market & Tech Reports  Updated at: 2025/12/16

jointly developed a hydrogen engine for medium-duty trucks and started cruise tests. The hydrogen engine passed an inspection for structural and other changes and was given a license plate by April 2023. The five companies have been jointly engaged in the “Project for Business Viability Study of Conversion of Existing Medium-duty Heavy Vehicles into Hydrogen Engine-powered Vehicles” since August 2021 and developed the hydrogen engine, which ...

Major Suppliers  Updated at: 2025/12/16

ovement of painting technologies. The plant also produces green hydrogen from renewable energies including solar power generation. The hydrogen is utilized for verification test of fuel cell transporter, which started from the end of 2022. At the Hamamatsu Plant, through reduction of energy use and conversion into renewable energy including the expansion of solar power generation facilities, the plant will now target to achieve carbon neutrality ...

OEM Plants  Updated at: 2025/12/16

t 1, which produces the Trailblazer, a key export vehicle, will continue to operate normally. As a result, the 1,200 employees at the Bupyeong Plant 2 will be divided into 700 at the Changwon Plant and 500 at the Bupyeong 1st Plant. However, due to regional characteristics, the application rate for conversion to the Changwon plant is low. On January 30, GM said it planned to launch six new and upgraded models in Korea in 2023. GM will launch the ...

OEM Plants  Updated at: 2025/12/15

t 1, which produces the Trailblazer, a key export vehicle, will continue to operate normally. As a result, the 1,200 employees at the Bupyeong Plant 2 will be divided into 700 at the Changwon Plant and 500 at the Bupyeong 1st Plant. However, due to regional characteristics, the application rate for conversion to the Changwon plant is low. On January 30, GM said it planned to launch six new and upgraded models in Korea in 2023. GM will launch the ...

OEM Plants  Updated at: 2025/12/15

Shindengen's Power MOSFETs ”Maximizing energy conversion efficiency for the benefit of humanity and society." Since our founding in 1949, Shindengen Electric Manufacturing Company’s business has centered on power electronics, which has been represented in our power semiconductors, switching power supplies, and car electronics devices. Over the years, we have developed countless products that meet the expectations and trust of our customers w...

Find Suppliers  Updated at: 2025/12/12

g elemental technologies for the production, transportation, and use of hydrogen. As for the third topic, the three parties will seek to popularize vehicles equipped with solar power generation systems, which convert light energy into electrical energy. To this end, they will pursue improvements in conversion efficiency and reductions in cost for both solar batteries and solar power generation systems....

OEM Plants  Updated at: 2025/12/12

övde, Sweden-based engine plant including the related R&D team, along with its engine plant in China and other relevant assets to the joint venture in coming months. On December 3, the Swedish Environmental Protection Agency has approved a grant of almost SEK 150 million (USD 14.8 million) for the conversion of part of the Skövde plant to produce powertrains for electric vehicles. The Aurobay plant is currently being used to assemble E-drives f...

OEM Plants  Updated at: 2025/12/11

Ford E-Transits will be fitted with a high-power fuel cell stack, in conjunction with significant hydrogen storage capability. The project is partly funded by the Advanced Propulsion Centre (APC). Ford Pro, the company's commercial vehicle (CV) and services division will use the pilot to expand its conversion expertise, supported by engineers and E-Transit specialists from Dagenham and the company's nearby Dunton Technical Centre, in Essex. Ford ...

OEM Plants  Updated at: 2025/12/11