ts. Although Hitachi does not plan at present any major investment either in production increase or in new facilities for FY 2007 and after, many production line renewals for new orders and model changeovers are expected. Taking opportunities of facility replacements along with major line upgrades, installation of high-precision clean rooms will be accelerated.(From an article in the Nikkan Jidosha Shimbun on Mar.6, 2007) Hitachi, Ltd. announced ...

Major Suppliers  Updated at: 2026/04/22

s and quicker clutch response. The clutch can be controlled independently from the engine ECU to save vehicle space and cost. In addition, a guide vane cowl to be exhibited is a conical ring fan, which is initially developed based on the XD11RF-770K fan. The vane clearance is reduced through engine installation. This product currently has molds manufactured in Europe and is in the design process of new variants that match 700K and 750K fans. (Fro...

Major Suppliers  Updated at: 2026/04/16

usions with adhesive + FDS inside steel plate SIDE SILL. The part where steel and aluminum touch is coated with adhesive to prevent rusting. The Company is developing technologies for joining dissimilar materials, such as castings and extrusions. M12 pierced nut: Large brim, high strength, one-step installation, intended for EV battery assembly. Nissan Toyota Honda Lexus Scion Isuzu Navara (Thailand) Coaster X-Trail Step WGN N-ONE Zest Allion Har...

Major Suppliers  Updated at: 2026/04/10

pting to various vehicle needs. Its eco-friendly design, free of rare earth magnets, makes it both cost-effective and environmentally friendly. It operates at noise levels below 40 dB(A) and functions reliably in temperatures ranging from -40°C to 90°C. Additionally, its compact design also makes installation and manufacturing easier. Based on TI Fluid Systems press release The European Commission has approved the acquisition of TI Fluid System...

Major Suppliers  Updated at: 2026/04/10

ckness, material, and design can be flexibly adapted to meet needs. 7040 and 7045 are made by adding glass fiber nonwoven fabric to the 7020 and 7025 sheets. This creates an air layer, enhancing the heat insulation effect. *Presented by Federal-Mogul The 7005 has a seal attached to the 7000 to make installation easier. *Presented by Federal-Mogul The mica layer prevents high-temperature metal fragments from flying off during thermal runaway. *Pre...

Major Suppliers  Updated at: 2026/04/10

established a highly efficient technology capable of engine valve extrusion forging in one process, which previously required several stages. Moreover, the forging facilities have been downsized to one third of the current line. The initial investment, therefore, should be reduced, which will make installation of the system in highly cost-competitive emerging nations tangible. Nittan Valve will make proposals on the strength of these production ...

Major Suppliers  Updated at: 2026/04/10

the vehicle, enabling a broad range of detection applications, including head-on collisions, when turning right or left at an intersection, when changing lanes, when the vehicle is stopped and general driving conditions. The volume and weight of the radar unit have been reduced by about 30%, making installation on the inside face of the bumper possible. (From a press release dated April 12, 2022) Furukawa Electric Co., Ltd. (Furukawa Electric) an...

Major Suppliers  Updated at: 2026/04/10

with three Toyota group companies, Toyota Boshoku Corporation, Aisin Seiki Co., Ltd., and Shiroki Corporation. This eliminates the need for brackets to install seats, improves stability against horizontal vehicle movement, and giving the driver a sense of control unified with the car body. This new installation method became possible with the introduction of the Toyota New Global Architecture (TNGA) platform, and will be applied to other Toyota m...

Major Suppliers  Updated at: 2026/04/09

. 20, 2013) H-One Co., Ltd., a supplier of body frame components in the Honda Group, is going to install new, trial press machines for die production at its plants in China and India. Up until now, both facilities have been handling test stamping using press machines on their mass-production lines. Installation of the dedicated, test-pressing machines will allow each plant to increase their die production capacity by 50 percent from the current l...

Major Suppliers  Updated at: 2026/04/06

nvironment with a decline in European vehicle production significantly affecting sales. The Safety and Motion business area had declining sales for brake systems and airbag control units. Sales in the User Experience business area declined due to decreased sales of display solutions caused by lower installation rates and delays in new product launches. In contrast, sales in the Architecture and Network Solutions as well as the Autonomous Mobility...

Major Suppliers  Updated at: 2026/03/31

ion line. The company plans to increase CVJ capacity from approximately 0.8 million units to about 1.2 million units by adding 0.4 million units of capacity, with the new capacity targeted to be operational by August 2027.​ The investment amount will be finalised and cleared by the board when the installation plan is framed, and the project will be financed through a mix of internal accruals and borrowings. JTEKT India stated that the additiona...

Major Suppliers  Updated at: 2026/03/30

uary 8, 2016) TPR Co., Ltd. has received a contract to supply piston rings to Mazda Motor Corporation for the first time in about ten years. The piston rings will be used on Mazda's Skyactiv engines, which TPR already supplies cylinder liners for. In addition, TPR's valve seats have been chosen for installation on the automaker's flexible fuel vehicles. In October 2015, TPR opened a new office in Hiroshima City, where Mazda's headquarters is loca...

Major Suppliers  Updated at: 2026/03/20

da Gosei Minda India Pvt. Ltd. (TGMIN), a joint venture between Toyoda Gosei and a local firm, has established a new office in Gurgaon, a suburb of New Delhi. Toyoda Gosei will create a system for locally developing and designing airbags, demand for which is expected to surge due to a law requiring installation of them. The company also announced plans to more than double its overall sales in India to JPY 35 billion from the current level by fisc...

Major Suppliers  Updated at: 2026/03/04

with multiple products for Xing Yue L Continental begins operation of its electronic suspension system plant in Jiangsu Province Continental opens foam technology plant in Changshu Continental forms strategic partnership with Censtar Continental begins production in China of brake-by-wire MK C1 for installation in Volvo XC60 and S90 Continental completes third phase of Lianyungang plant Continental and Jidu Auto sign strategic partnership agreeme...

Major Suppliers  Updated at: 2026/02/27

The investment includes machines for hard turning, grinding, hobbing for gearing solutions and the specialized machining of synchronizer parts. Oerlikon Graziano’s new facilities include machines for more than EUR 30 million, installed throughout 2017 at the company’s plants. Completion of the installation is scheduled during Q2 2018. (From a press release on November 9, 2017) Oerlikon Drive Systems informed that it is organizing a Technolog...

Major Suppliers  Updated at: 2026/02/27

vehicle side remains on track as it continues to add new value-added products and increase share with existing customers. (From analyst update on August 13, 2019 ) Bharat Forge announced that the construction on its Centre for Light Weighting Technology in Nellore is complete and it has begun final installation and fine tuning of the equipment at the center. It will begin trial production in September and start revenue by October, 2019. It is goi...

Major Suppliers  Updated at: 2026/02/12

iffs on all goods coming into the U.S from Mexico and Canada, as well as an additional 10% on Chinese imports, will go into effect on March 4. EU and specific sector tariffs are to follow. (multiple sources on February 28, 2025) Valeo Group (Valeo) announced that ENGIE has inaugurated a 3 MWp solar installation at Valeo’s Ath site in Belgium. The installation includes 1,500 panels mounted on a 275-space carport and 2,900 panels installed on t...

Major Suppliers  Updated at: 2026/02/09

vehicles (EVs), and will be installed in Toyota's bZ4X as the core unit that handles the charging and power conversion functions. By integrating the two components necessary for EV operation, the company has achieved a 23% reduction in size and a 17% reduction in weight compared to the conventional installation of separate components. In addition, the increased ease of installation in the vehicle contributes to securing a flexible interior space ...

Major Suppliers  Updated at: 2026/02/09

with three Toyota group companies, Toyota Boshoku Corporation, Aisin Seiki Co., Ltd., and Shiroki Corporation. This eliminates the need for brackets to install seats, improves stability against horizontal vehicle movement, and giving the driver a sense of control unified with the car body. This new installation method became possible with the introduction of the Toyota New Global Architecture (TNGA) platform, and will be applied to other Toyota m...

Major Suppliers  Updated at: 2026/02/09

24. The expanded facility will focus on producing various types of airbags, steering wheels, and safety components.As part of a broader development and production network, Toyoda Gosei aims to meet growing demand from automakers. With the increased focus on collision safety in India, the widespread installation of side and curtain airbags is anticipated alongside frontal airbags. Established in April 2008, the Neemrana plant employs approximately...

Major Suppliers  Updated at: 2026/02/09