ment, and the supply of air and hydrogen. The company will also present a health monitoring system for hydrogen vessels. The system offers smart analysis to check the status of onboard tanks to extend tank lifecycles and facilitating maintenance operations. Moreover, it will also display the 2.2kWh nickel manganese cobalt (NMC) lithium-ion energy battery for EV applications and the high-voltage power battery system designed for buses, trams, and ...

Major Suppliers  Updated at: 2025/07/17

nts digitally from the initial stages of development. (From a press release dated September 24, 2021) Denso Corporation (Denso) and Aisin Corporation (Aisin) will actively promote their key products for electrified vehicles. Denso has developed a high-performance magnet using inexpensive steel and nickel. The new magnet is equal or higher in terms of performance to neodymium, a rare earth material. Denso has successfully developed an iron and ni...

Major Suppliers  Updated at: 2025/07/15

its production capacity of exhaust gas sensors and spark plugs in the global market. In order to meet expected growth in demand for these products especially in emerging countries, new sensor plants are slated to be set up in China and Vietnam by fiscal year 2015. In addition, a production line of nickel spark plugs will be installed at Denso's new Indonesian facility scheduled to become operational by 2014. Furthermore, Denso plans to integrate...

Major Suppliers  Updated at: 2025/07/14

-end recycling of lithium-ion batteries and has already delivered a successful pilot line and completed projects with major automotive OEMs as well as battery manufacturers. cylib’s process offers an efficient, resource- and climate-friendly recovery of raw materials, including lithium, graphite, nickel, cobalt, and manganese from battery packs, black mass, or production scraps. This funding will support its aim to become Europe’s primary bat...

Major Suppliers  Updated at: 2025/07/09

designed to optimize battery management systems (BMS) performance and safety. Based on NXP’s SmartMOS SOI (Silicon-on-Isolator) technology, the MC33774 offers cell measurement accuracy down to 0.8 mV in temperatures ranging from -40°C to +125°C. This helps ensure lifetime performance with both nickel manganese cobalt (NCM) and lithium iron phosphate (LFP) cell chemistries. The MC33774 18-channel analog device also meets ASIL D requirements. ...

Major Suppliers  Updated at: 2025/07/04

he platform used by a small model "Vitz." The hatchback is installed with a 1.5-liter engine, one size smaller than the 1.8-liter on the Prius. Its fuel consumption is rated at about 43 kilometers per liter, more than 10 percent better than the high-end version of the Prius. Though it uses the same nickel metal hydride batteries as those on the Prius, it has achieved lower fuel consumption by reducing weight of the body and other components. The ...

Major Suppliers  Updated at: 2025/07/02

usiness group. The shipment is one of North America’s first deliveries of engineered cathode materials for a specific battery application as part of a commercial vehicle validation and launch process. Ascend Elements uses a process called Hydro-to-Cathode direct precursor synthesis to manufacture Nickel Manganese Cobalt (NMC) precursor cathode active material (pCAM) and cathode active material (CAM) from used lithium-ion batteries and battery m...

Major Suppliers  Updated at: 2025/06/03

thermal management system; The vehicle serves to highlight the Company's electric vehicle technologies as well as its systems integration capabilities System is comprised of electric motor, silicon carbide inverter and transmission for heavy-duty vehicles; New eAxle system utilizes stamped housing Nickel Manganese Cobalt battery pack System combines cooling functions with a single actuator to support multiple actuation applications while reducin...

Major Suppliers  Updated at: 2025/06/02

credit of USD 7,500 offered for each vehicle that fulfills the IRA requirements. To meet the eligibility criteria, 50% of a vehicle’s battery components must be manufactured or assembled in North America, while 40% of the essential minerals used in the battery, such as aluminum, cobalt, lithium, nickel, and graphite, must be extracted, processed, manufactured, and assembled in the U.S. (From a press release dated May 23, 2023) TI Fluid Systems...

Major Suppliers  Updated at: 2025/05/23

CATL (Contemporary Amperex Technology Co., Ltd.) China Yuqun ZENG -Chinese privately owned mega battery manufacturer. Main products are automotive batteries. -In the drive battery business, the Company offer a diverse product lineup of chemical systems, including condensed batteries, ternary high nickel batteries, ternary high voltage medium nickel batteries, M3P batteries, lithium iron phosphate batteries, and sodium ion batteries. CATL's automo...

Major Suppliers  Updated at: 2025/05/19

ment, and the supply of air and hydrogen. The company will also present a health monitoring system for hydrogen vessels. The system offers smart analysis to check the status of onboard tanks to extend tank lifecycles and facilitating maintenance operations. Moreover, it will also display the 2.2kWh nickel manganese cobalt (NMC) lithium-ion energy battery for EV applications and the high-voltage power battery system designed for buses, trams, and ...

Major Suppliers  Updated at: 2025/05/14

for automobiles, to welding "giga steel.” Giga steel is an ultra-high-strength steel with a load capacity of over 100kg per 1 square millimeter. The PosZET GIGA solution can more than double the corrosion resistance and the durability of car parts when compared to parts welded using conventional nickel-based welding materials (wire rods). It can also halve the production cost. Both companies have been technology partners since 2021, and the Po...

Major Suppliers  Updated at: 2025/05/08

electrifies the onboard equipment utilizing a unique ultracapacitor-based technology in refuse collection vehicles. SuperBattery offers a safer and more efficient alternative to conventional Li-ion batteries, can be charged in 90 seconds, has 50,000 life cycles, and is free from cobalt, copper, and nickel.  SuperBattery is also unburnable. It can help eliminate 40-50% of CO2 emissions. The solution developed by the two companies can be installed...

Major Suppliers  Updated at: 2025/04/28

reduce CO2 emissions further. Start of the production is currently scheduled for 2012. (From a press release on Sep. 9, 2009) Delphi currently supplies its power electronics for hybrid vehicles offered by Ford - the Fusion and Escape. (From a press release on Sep. 9, 2009) Delphi currently supplies nickel-metal hydride (NiMH) batteries for Ford hybrid models - the Fusion and Escape. (From a press release on Sep. 9, 2009) Delphi currently supplies...

Major Suppliers  Updated at: 2025/04/23

reas 2017 Wroclaw, Poland, LG Energy Solution Wroclaw sp. z o.o. LG Energy Solution (100%) 115 GWh -Production capacity will reach 115 GWh in 2025 2024 IndonesiaKarawang New Industrial CityHLI Green Power Hyundai Motor Group (50％)LG Energy Solution(50％) 10 GWh -The plant will produce NCMA (nickel-cobalt-manganese-aluminum) lithium-ion battery cells with an annual production capacity of 10 GWh at full capacity, equivalent to 150,000 EVs. ...

Major Suppliers  Updated at: 2025/04/17

t extensively use plastics, such as cockpit modules, lamps, and airbags. 2. Developing new materials with fewer rare metal use and improved performance for high-value-added products such as electrification and electronic components: Hyundai Mobis has developed a new material that reduces the use of nickel metal in inductors for electric vehicles (EVs) from the previous 50% to the 30% range. Furthermore, Hyundai Mobis has developed and is evaluati...

Major Suppliers  Updated at: 2025/04/16

nt platforms. The system can be used to cool prismatic or pouch battery cells, as well as on-board chargers and DC-DC converters. The eCoolers are stamped and brazed from copper or aluminum to provide a cost-effective solution. The internal design can be adapted to adjust thermal performance, while nickel plating can be added to improve corrosion resistance. The cooling plate system is comprised of extruded aluminum profiles that fit between rows...

Major Suppliers  Updated at: 2025/04/02

ration hydrogen fuel cell engine. Designed to meet the duty-cycle, performance, and packaging requirements of medium and heavy-duty trucks and buses, the fuel cell technology is available in 135-kW single- and 270-kW dual modules. Its battery portfolio includes both Lithium Iron Phosphate (LFP) and Nickel Manganese Cobalt (NMC) battery packs, each of which targets a different duty cycle and use case. The company spends approximately USD 1 billion...

Major Suppliers  Updated at: 2025/03/18

2011) ThyssenKrupp AG announced that its Stainless Global will become an independent entity under the name Inoxum. Inoxum will bring together the production, processing and distribution of stainless steel flat products as well as the production and distribution of high-performance materials such as nickel alloys, titanium and zirconium. Companies with plants in Germany, Italy, Mexico, China and the USA employing roughly 11,300 people are organize...

Major Suppliers  Updated at: 2025/03/13

f China with market share exceeding 20%. (From a press release on July 19, 2007) Chery Automobile will launch its new A5 ISG sedan in the latter half of 2008, which will be powered by a hybrid battery system developed by Johnson Controls-Saft Advanced Power Solutions. Chery Automobile has chosen nickel metal hydride (Ni-MH) batteries from Johnson Controls-Saft for its latest vehicle. In the first phase the Ni-MH cells will be manufactured in F...

Major Suppliers  Updated at: 2025/03/11