rs Thin wall dry liners Wet liners -Valve seats Valve seats for gasoline engines Valve seats for diesel engines Valve seats for gas engines Valve seats for alcohol fuel engines -Valve guides Valve guides for Gasoline/Diesel Engines -Seal rings Sintering and steel seal rings Resin seal rings -Carbon scraper ringsPlastic Exterior Parts-Radiator grilles-Millimeter wave radar coversMoldings-Moldings-Roof railsElectric & Electrical Components-R...

Major Suppliers  Updated at: 2026/03/20

LED fog lamp with two "Ice Cube" inner lens structure - Fog + cornering function with thicker inner lens - Equipped vehicle: Tata Motors Nexon Headlamp for two wheeler with logo illumination. Achieves uniform logo illumination without a dedicated light source. The lamp consumes less power with less carbon emission for longer battery life, reduced PCB size and fewer electronics parts. - Equipped vehicle: Honda Activa e UN-ECE F3 certified front f...

Major Suppliers  Updated at: 2026/03/16

wertrain Safety Thermal Management Motor and Controller -The Major product line for Group companies are as below: ANAND CY Myutec Automotive Brass synchroniser rings Steel synchroniser rings ANAND I-Power Piston rings Pressure plates Groove insert / Alfin insert Casting parts CY Myutec ANAND Carbon coated synchronizer rings Forged brass synchronizer rings Faurecia Clean Mobility Acoustics valve Ammonia storage and delivery system Catalyt...

Major Suppliers  Updated at: 2026/03/16

Actuators Controllers Advanced Sensors Printed Circuit Boards (PCB) Box Build Assemblies Minda Westport Technologies Limited Alternate Fuel Systems – CNG and LPG kits Minda TG Rubber Private Limited Brake Hoses Fuel Hoses Roki Uno Minda Company Private Limited Automotive Air Intake Systems Carbon Canisters Intake Manifolds & Power Steering Fluid Filters Automatic Transmission Fluid Filters Power Steering Fluid Tanks Uno Minda Tachi-S Se...

Major Suppliers  Updated at: 2026/03/04

s division. -In 2023, the Continental Group generated 21% of its sales in the USA (22% in 2022), 19% in Germany (18% in 2022) and 11% in China (12% in 2022). Other than these countries, there were no countries in which more than 10% of sales were achieved. -Continental has established the following carbon neutrality goals: Starting in 2022, Continental will fully promote carbon neutrality in zero-emission automobiles, buses, trains and other veh...

Major Suppliers  Updated at: 2026/02/27

Oerlikon Group Oerlikon Balzers continues expansion with new coating centre in China Oerlikon Balzers invests USD 4 million in Queretaro, Mexico Oerlikon Balzers announces centre in Bisingen, German Oerlikon Balzers inaugurates two customer centers in Sweden Oerlikon Balzers unveils Diamond-Like-Carbon coatings Oerlikon Balzers inaugurates dedicated forming tools facility in India Oerlikon Balzers opens application support centre in Sweden O...

Major Suppliers  Updated at: 2026/02/27

for new Mazda CX-9 Hitachi AMS selected as VW's strategic partner in gasoline injection systems field Hitachi Automotive Systems eyeing 10% share of vehicle safety and information market Hitachi Automotive Systems to supply high pressure fuel pumps to Volkswagen Hitachi Automotive Systems to supply carbon-fiber propeller shafts for new Alfa Romeo Giulia Hitachi Automotive Systems' lithium-ion battery packs used on new Nissan Murano sold in China ...

Major Suppliers  Updated at: 2026/02/19

in solutions for commercial vehicles & buses in the 7.5 -14 tons weight category. These vehicles actively and autonomously manage the use of the range extender by utilising Tevva’s patented software, Predictive Range Extender Management System (PREMS), to ensure only electric drive is used in low carbon zones and other city centers. (From a press release on June 12, 2018) On November 6, Tevva unveiled ELECTRIFY - new Commercial EV Technology Fl...

Major Suppliers  Updated at: 2026/02/12

nagement plan YSP2026 includes measures to expand sales globally by strengthening the supply system for electrified vehicles of Toyota Group, Honda and others through introducing new technologies and new production methods. Exclusive Interview   【JMS 2025】Yorozu's Initiatives to Become Carbon Neutral and Increase Its Customer Base Hiranaka, President and COO  Exclusive Interview   -Listed on the Prime Market of the To...

Major Suppliers  Updated at: 2026/02/09

ss release on October 27, 2024) TotalEnergies EV battery and thermal management solutions-The Company announced an expanded partnership with TotalEnergies at the Paris Motor Show 2024. They will jointly develop innovative solutions to optimize EV battery performance while reducing the vehicle’s carbon footprint. Both companies have been jointly working on the development of a dielectric liquid immersive cooling solution since 2022. The soluti...

Major Suppliers  Updated at: 2026/02/09

Industries, Aisin AI, and Advics Toyota Motor Corporation, which plans to start production of the Lexus LFA sports car in December 2010, has been supported by several of its major parts suppliers for achieving its aggressive vehicle performance targets for the model. Both the body, which is made of carbon fiber reinforced plastic, and plastic windows were developed through joint development activities with Toyota Industries Corporation. The trans...

Major Suppliers  Updated at: 2026/02/09

announced that the introduction ratio of electric power generated from renewable energy resources reached 100% at its 12 plants out of 13 in Japan. The company’s goals to achieve a 50% renewable energy introduction ratio in the fiscal year that ends in March 2031 (FY 2030), and a 50% reduction in carbon dioxide (CO2) emissions from production from the FY 2019 figure have been achieved seven years earlier. The Company aims to achieve a 100% rene...

Major Suppliers  Updated at: 2026/02/09

ategy Mid/Long-term Management Plan: 2030 Business Plan-Aiming to be a company that better connects movements and lifestyles in the future based on pursuing the possibilities of polymers. Provide comfort founded on interior/exterior parts, safety, and security centered on safety systems. Achieve decarbonation based on forming new businesses involved with polymer materials. Targets for FY 2030: Sales: JPY 1.2 trillion Operating profit: JPY 100 b...

Major Suppliers  Updated at: 2026/02/09

ill mass-produce steel wheels that are almost 100% made of iron scrap derived from electric arc furnace production or renewable energy for the first time in the world in 2030. The company has about a 50% share of the passenger car steel wheel market in Japan. In light of the increasing momentum for carbon neutrality (reduction of greenhouse gas emissions to virtually zero), Topy Industries will maximize the advantages of steel wheels and promote ...

Major Suppliers  Updated at: 2026/02/09

rm them inside the mold in one step. Coating material is poured into a vertical general-purpose forming machine with a dedicated system, and is thermally solidified in the mold. The new technology completes molding, coating, and drying processes using a single injection molding machine, and reduces carbon dioxide (CO2) emissions by about 60% per product unit. The in-mold coating technology, which also eliminates the need for coating booths, is ex...

Major Suppliers  Updated at: 2026/02/09

ctric strength: 5 kilovolts(Detailed News) NEXUSEYE: a millimeter-wave sensor for detecting pedestrians - Released in the US by Itelis.-Installed near crosswalks and other locations to detect pedestrians.-Capable of a very high level of accurate detection covering a wide area.(Detailed News) Carbon-neutral Initiatives Greenhouse-gas-emission targets for 2030 and 2050-By 2030, using FY2018 emissions as the benchmark, reduce direct greenhous...

Major Suppliers  Updated at: 2026/02/09

9,941 240,971 -Industry mobility 50,296 52,186 52,395 Capital investment Investment of JPY 900 billion over 7 years for sustainable field-It plans to invest about JPY 900 billion over seven years from April 2024 to March 2031 (FY 2024-2030) in the fields that contribute to the realization of carbon neutrality (zero greenhouse gas emissions) and a recycle-based economy. The company will strengthen the development of silicon carbide (SiC) po...

Major Suppliers  Updated at: 2026/02/09

gs. Electrification: Developing springs that are efficient in transmitting electricity and heat, and developing springs that isolate vibrations Wire springs and disc springs: Develop a system for conducting analysis, in order to create optimum designs and achieve greater reliability of products. Carbon-neutral Activities -In response to climate change, the NHK Spring Group Environmental Challenge aims to reduce CO2 emissions by 50% by 2030, us...

Major Suppliers  Updated at: 2026/02/09

(From an article in the Nikkan Jidosha Shimbun on October 25, 2019) A range of Koito’s products are featured on the GaN Vehicle, an electric vehicle concept developed by Nagoya University which utilizes gallium nitride devices. The use of gallium nitride in electric vehicles significantly reduces carbon dioxide emissions. Koito’s products on the GaN Vehicle include laser high-beam headlamps; low-beam headlamps; position lamps; turn signal lam...

Major Suppliers  Updated at: 2026/02/09

ystems and other products, JTEKT will start the verification of an aluminum melting furnace that uses “green hydrogen” derived from renewable energy in the fall of 2025. JTEKT will also introduce a solar power storage system and a hydrogen generation technology that will be evaluated at the new Carbon Neutral (CN) Laboratory established at its head office. JTEKT installed a solar power generation system with an output of 2.5 megawatts on the ...

Major Suppliers  Updated at: 2026/02/09