novative design, compatible with cockpit panels for Cockpit & ADAS controller - Highway NOA/Commuting NOA/HPA - Ultra-thin design, suitable for installation in cabin - Innovative design, compatible with cockpit panels for Cockpit& ADAS controller - Highway NOA/Commuting NOA/HPA - Supports output of target point or point cloud data - Long-range recognition capability, up to 300m - High detection accuracy: Speed: +0.03m/s; ranging precision: 0.1m; ...

Search Suppliers  Updated at: 2025/04/27

DIAMET Klang Malaysia Sdn. Bhd. Malaysia -Shareholder: Diamet Corporation Timing gear Sintering Sprocket Retainer Target Wheel Oil-less Bearing ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/04/22

Cellforce Group GmbH (CFG) Germany -Shareholder(s): Porsche AG 100% -The production target is 100MWh in 2024. BMS (Battery Management System) Lithium-ion battery cell Lithium-ion battery module Lithium-ion battery / Lithium-ion battery pack Lithium-ion battery electrolyte ...

Search Suppliers  Updated at: 2025/03/12

is canceled. - Compatible with multiple global navigation satellite systems. - For advanced driver assistance systems - Inertia measurement unit - High voltage, high precision Automotive high performance NFC reader for CCC (Car Connectivity Consortium) digital key. It supports NFC initiator, NFC target, NFC reader and NFC card emulation modes and it enables fast product development for car access/start applications in areas like door handle or...

Search Suppliers  Updated at: 2025/02/25

unit (EDU) with a novel, dual-rotor, radial-flux electric machine and an integrated SiC-inverter offering high efficiency at low cost. A two-stage, spur gearbox with coaxial output shaft minimizes space consumption at a very low cost level. Gearbox ratio can be varied in a range from 6.4:1 to 9:1. Target applications: main drive unit for compact and mid-sized vehicles and all-wheel-drive options for premium electric vehicles. Wheel hub drive wi...

Search Suppliers  Updated at: 2025/02/19

erland. Status: product validation phase The demo unit shows that the integrated position sensor inside the motor offers a much higher accuracy of less than 0.1° and that quantitative internal errors are detected ahead of the failure. This novel technology enables motor position sensing without a target. AC/DC single-circuit current sensor provides a cost-effective sensing solution for EV Motor applications using Hall-effect technology. Brake-b...

Search Suppliers  Updated at: 2025/02/19

ework Next generation digital cockpit solution -Integrates Human Machine Interface (HMI) development tools and frameworks on a single platform for in-vehicle infotainment (IVI) and information display -Model-based development approach; implementation from use to modeling to simulation of use on the target platform -Customize from a single source to different brands and models -Measurement and simulation hardware to support the development of ADA...

Search Suppliers  Updated at: 2025/02/14

Sakuma Special Steel Co., Ltd. Japan -Special Steel Sales Company Various machining Heat treatment Aluminum machining Various forging Special steel materials (Structural steel Tool steel Stainless steel) High alloy materials (High alloy Titanium) Next generation materials (Stainless steel powder Super-alloy powder Magnetic powder Target materials Magnets) Automotive World 2023 ReMax Composite products Lightweighting with ReMax Composit -Vario...

Search Suppliers  Updated at: 2025/02/13

79 million (CY2022 Unconsolidated Results) - Shareholder(s): Benda Kogyo Co., Ltd., SunKwang lnd. Co., Ltd Heat treatment Various machining Flywheel ring gear Cold forging Drive plate ring gear Differential ring gear Flywheel Welding Drive plate Cold bending process Ring gear Inertia Ring Axle Ring Target Ring Sensor Rotor ISO14001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2024/05/21

Jiaxing Target Auto Parts Co., Ltd. China Various machining Other brake parts Chassis / Frame Assembly Air brake Wheel cap / cover Commercial vehicle parts Air valves Slack adjusters ...

Search Suppliers  Updated at: 2024/02/28

dSPACE Mechatronic Control Technology (Shanghai) Co., Ltd. China -Shareholder：dSPACE GmbH BMS (Battery Management System) Advanced Driver Assistance System (ADAS) Electric powertrain system Autonomous Driving (AD) system Software development verification solution Test environment Simulation tool 2020 SAE-China Congress & Exhibition Radar microcontroller evaluation board with target detection software ...

Search Suppliers  Updated at: 2024/02/28

Shenzhen Vergiga Semiconductor Co., Ltd. China Various semiconductors MOSFET IGBT electronica China 2023 SiC single tube IGBT modules Target application for new energy vehicles Target applications are AC motor drives, inverters, servo drives, etc. ISO9001...

Search Suppliers  Updated at: 2023/07/26

Shanxi Sanlian Casting Co., Ltd. China -Shareholder: Asia Target Enterprises Ltd., Shanxi Sanlian Technology Industry Group Co., Ltd. Various machining Aluminum machining Iron casting Cylinder head Engine bearing cap Aluminum die casting Cylinder block Aluminum casting Transmission case IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2021/12/28

Guangzhou Huaguan Fineblanking Components Co., Ltd. China Other brake parts Various stampings Seat metal parts Fine blanking Mold Rear Axle Cover ABS Ring Gear Engine Target Wheel ISO9001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2021/01/27

S/AD ScaleCam Mono2Stereo -Uses both visible light and far-infrared cameras -Nearly 100% real-time object detection in harsh environmental conditions such as darkness, rain, fog, smoke, glare, etc. -Dynamic resolution: 30FPS (selective area of interest) -Depth accuracy: <10%@100M -Minimum detection target: 35cm x 25cm@100m (under high illumination) -Horizontal angle: >45° - Software enabling stereo camera function by using independent two camera...

Search Suppliers  Updated at: 2020/12/03

Toshima Manufacturing Co., Ltd. Japan CVT parts Gear Other brake parts Other automatic transmission parts Various Electrical / Electronic parts Various stampings Various machining Shaft Cold forging Heat treatment Wheel hub Sputtering target Bulk materials and Powder materials Spin coating materials Materials for lithium ion battery solid electrolyte Ferroelectric material ISO9001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2019/05/15

ed solid ester to improve regin properties Modipar AS155 is a resin additive that can solve the noise issues that have become apparent in automotive plastic parts. As is often the case, automotive plastic parts generate noise when they rub against resin or leather. Modiper AS155 can be added to the target resin to reduce the noise without affecting the basic properties of the resin. (Applicable resins: ABS, PC/ABS) Adding a small amount NOF-ALLOY...

Search Suppliers  Updated at: 2014/08/21