Henkel AG & Co. KGaA Germany -Henkel Group headquarters Various processes Adhesive Vibration / Acoustic insulator Tape Seal Other body reinforcement and protector parts Various surface treatments Dielectric Coating Conductive Coating Battery Fireproof Coating Conformal Coating Optical Coating Potting Safety Pads for Lithium Batteries Thermally Conductive Adhesives Electrically conductive adhesive (ECA) Structural Adhesives Structural Tapes Sound...

Search Suppliers  Updated at: 2025/05/14

nal batteries. Peak charging rate is 6C. Charge to 80% SOC in 10 minutes. Safety: Passed six extreme safety and reliability tests, including high temperature needle test of electric core, high temperature multi-point thermal diffusion test, 96H salt water immersion test, long-term high temperature fire test, 12m drop test, and continuous heat and force coupling test under seven extreme working conditions. Low temperature resistance: The integra...

Search Suppliers  Updated at: 2025/04/03

lder(s): Hainan Mingchuan Intelligent Technology Co., Ltd. Spark plug Various Electrical / Electronic parts Various sensors Other exhaust parts Commercial vehicle parts Exhaust gas aftertreatment systems T-Box Particulate matter sensor OBD Remote monitoring terminal Engine electronic control system Fire prevention and control system for EV batteries ...

Search Suppliers  Updated at: 2025/03/07

tal substrates, even after temperature and moisture aging Aqueous and solvent-based dispersion for cell performance improvement Advantageous replacement for aluminum cathode current collectors in lithium sulfur batteries and copper current collectors in silicon anode batteries Range of lightweight, fire-resistant polyurethane and epoxy composite resins solutions for battery performance improvement ARADITE wet compression molding and intrinsic fir...

Search Suppliers  Updated at: 2025/02/21

ly reduced the number of parts by modularization. The multi-material structure, which uses metal and composite materials in the right places, has achieved a weight reduction of about 15% compared to aluminum. Complex shapes can be molded in one piece, and originally developed SMC materials are also fire resistant. Sereebo(R) as CFRTP has about four-times energy absorbing performance than steel. Modified cross -section and uneven thickness struct...

Search Suppliers  Updated at: 2025/02/20

ternational Suppliers Fair (IZB) 2024 NU-Sleeve SG-200EV NU-Green Range / Green Crush Range / Polygreen NP Electric Vehicle Protection Automated solutions protection A textile sleeve made of coated glass fiber fabric that is suitable for the protection of busbars Its silicone coating gives it high fire resistance, even in the event of a thermal runaway, and prevents flames from spreading in vehicles while maintaining high dielectric resistance. ...

Search Suppliers  Updated at: 2025/02/20

Various surface treatments Silicone materials Thermally Conductive Compound Thermally conductive gap filler Silicone Synthetic Leather Automotive World 2023 SPECFLEX Polyurethane NVH System / BETAFOAM Pillar Filling Foam Materials for Automotive Seat Cushions INFINAIR / SPECFLEX Silicone rubber Fire protection materials for batteries Heat dissipation solutions for EV batteries Conductive silicone adhesive and gasket material Polyolefin elasto...

Search Suppliers  Updated at: 2025/02/19

sensors; Cost and space is optimized through use of flexible printed circuit boards to replace wiring harnesses System which directs power throughout the vehicle while optimizing battery performance and including protection technology; Integrates connectors, fuses, terminals and busbars Made from fire resistant materials to protect against thermal runaway; Available in flat wire, flexible, and hybrid versions. Display includes 20 A and 40 A, w...

Search Suppliers  Updated at: 2025/02/17

Dafo Vehicle Fire Protection AB Sweden Commercial vehicle parts Other general parts Fire protection systems for buses and coaches Fire extinguisher ...

Search Suppliers  Updated at: 2025/02/14

from C/SiC Engine shield for sports cars made from SYTex CFRP control arm Demonstrator for forged molding compound grades FMC Suspension Part Structural Shield Seat Support Frame Skid Plate for Evs SymaLITE Underbody Shield Qtex Load Compartment Tray Battery Cell Holder (for Round Cells) EV Battery Fire Shield Energy Storage System Porsche GT3 RS Front wheel Full Suspension MTB Rocker PP2-DG high temperature silicone dielectric gels ExSil 100 Pot...

Search Suppliers  Updated at: 2025/02/13

es Busbar Cover/ Connector Inter-Cell Spacers Coolant Tubes Top Cover / Compression Pads End Plates Soundproofing Cellulose NanoFibers 60 GHz mmWave radar antenna-in-module for fall, presence, and movement detection demonstration Vital signs monitoring system and next-gen HUD demonstration unit Fire-retardant plastics for lithium ion batteries Composites of "SunForce" expanded modified PPE beads and CFRP Voice command, audio/voice DSP, noise...

Search Suppliers  Updated at: 2025/02/12

ex (lamitates surrounding the batteries in black) Shield T module cover (in grey, plate with holes) and Mica Tube (above it) -The Shield T41 (grey pad between the batteries) is formed by a two mica sheets covering a compressible fiber core. -Mica is a type of phyllosilicate that offers electrical, fire and thermal resistance performance. -The Cellspacer has very low density compared to steel but still robust. -The Myoflex can take high electri...

Search Suppliers  Updated at: 2025/02/12

n Thermal gap pads Thermal gap fillers Super high thermal conductive pads Fi-Block TIMLIGHT-1.5-S thermal conductive pad TIMLIGHT-3LW-S thermal conductive pad 3D thermal gap pad MANION-HST thermal conductive sheet CGW series thermal conductive greases CGW-AD series thermal conductive adhesives Anti-fire blast sheets Heat retention foam S-LEC sound acoustic film -S-LEC film -S-LEC solar control film Under development Under development -Information...

Search Suppliers  Updated at: 2025/02/12

s JEC World 2022 JEC World 2023 GFRP battery case Hankuk FC9 Series Effect of thermal runaway within the EV battery system battery case material comparison: GFRP, GFRP-AL and AL Engine cover BX-F wheel Carbon Hybrid Wheel Rear Diffuser Battery Case -Glass composite material for EV battery cases -Fire retardant resin system providing an effective solution against the effects of thermal runaway within the EV battery system and remains intact aft...

Search Suppliers  Updated at: 2025/02/10

s closed and usually back-printed with the option of backlighting and opening. The buttons can be embossed and can have tactile feedback, LED's, stiffeners and connector tails. In addition, an elastomer for 3D look and feel can be applied. The thermal pads are made from flexible and extremely soft fire-resistant silicone rubbers with thermal conductivity in addition to great heat stability. They are used to protect processors from overheating. C...

Search Suppliers  Updated at: 2025/02/05

Quaker Chemical B.V. Netherlands -Shareholder(s): Quaker Chemical Corporation -Regional Headquarters Paint coating Various surface treatments Other general parts Lubrication coating Anti-corrosion treatment UV coating Grease Lubricant Oil Fire-resistant hydraulic fluid Hot rolling oil ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/01/03

Shanghai Punan Fire Equipment Co., Ltd. China Various stampings Various machining Dash insulator Welding Filler pipe Seat Bracket Hinge Bracket Catalytic Converter Heat Shield Muffler Heat Shield ...

Search Suppliers  Updated at: 2024/12/30

Amazon Web Services Inc. (Amazon.com, Inc.) USA Andrew R. Jassy (President and CEO) Amazon Bedrock AWS IoT FleetWise Alexa Amazon Fire TV for Auto CES 2025 Amazon Autos information panels HCLTech partnership display NVIDIA partnership display ZeroLight partnership display Siemens partnership display Amazon Autos is an expansion of Amazon's e-commerce site to include cars; Under the service, customers can purchase cars directly from Amazon's ...

Search Suppliers  Updated at: 2024/12/04

KZWM OGNIOCHRON S.A. Poland Fire-extingushers ISO9001...

Search Suppliers  Updated at: 2024/11/11

Aplus Molds & Plastics Co.,Ltd. Taiwan Mudguard Bumper parts Other ventilator parts Foaming Plastic injection molding Motorcycle parts Floor mat Other wiper parts Air conditioner parts plastic fire extinguishers plastic safety guardrails injection mold ( bumpers electrical boxes wipers mudguards fans) IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2024/11/01