ight materials and processes were applied to the models already in the market as of 2022, and 15 models which were launched in 2022 have adopted lightweight materials for aluminium alloy front anti-collision beam steering knuckles. The weights of the ultrafine fiber soundproof pad and high-pressure vacuum die casting aluminum alloy damping tower are reduced by 45% and 30%, respectively. The Zeekr 009 adopts several advanced lightweight materials ...

OEM Plants  Updated at: 2025/04/21

The six UR10 cobots from Universal Robots, complete a choreographed sequence to sand the entire body surface in just 35 seconds. During the production process, each Fiesta is submerged in a special bath to provide more than ten years of corrosion protection. The six cobots smooths the small flecks vacuum any dust left behind. Final checks are completed by two employees before the vehicle body moves along the line for the primer application. On M...

OEM Plants  Updated at: 2025/04/04

with liquefied aluminum. The Lightweight Construction and Technology Centre in Landshut uses a 120-kilogram 3D-printed robot gripper for CFRP roof production. This gripper, lighter by 20%, extends robot life, reduces system wear, and cuts maintenance. It combines selective laser sintering (SLS) for vacuum grippers and clamps, and large scale printing (LSP) for the roof shell and bearing structure. Double grippers, produced via 3D printing, are no...

OEM Plants  Updated at: 2025/03/31

ight materials and processes were applied to the models already in the market as of 2022, and 15 models which were launched in 2022 have adopted lightweight materials for aluminium alloy front anti-collision beam steering knuckles. The weights of the ultrafine fiber soundproof pad and high-pressure vacuum die casting aluminum alloy damping tower are reduced by 45% and 30%, respectively. The Zeekr 009 adopts several advanced lightweight materials ...

OEM Plants  Updated at: 2025/03/28

The six UR10 cobots from Universal Robots, complete a choreographed sequence to sand the entire body surface in just 35 seconds. During the production process, each Fiesta is submerged in a special bath to provide more than ten years of corrosion protection. The six cobots smooths the small flecks vacuum any dust left behind. Final checks are completed by two employees before the vehicle body moves along the line for the primer application. On M...

OEM Plants  Updated at: 2025/03/20

ll hit the market in fall 2013. American Honda Motor announced a recall of approximately 748,000 model-year 2009-2013 Pilot and 2011-2013 Odyssey vehicles in the United States for airbag problem. Honda unveiled its 2014 Honda Odyssey Touring Elite on March 26. It is featuring an in-vehicle built-in vacuum cleaner "HondaVAC." The model is making its debut at the New York Auto Show and goes on sale summer 2013. On May 2 Honda Manufacturing of Alaba...

OEM Plants  Updated at: 2025/02/28

jing Automotive Group’s own brands surged by 107.47% to 14,757 units. On April 22, BAIC Group issued the "BAIC Group 2022 Social Responsibility Report". It is mentioned in the report that BAIC Motor Powertrain Co., Ltd. implemented an energy saving project on the recovery of steam condensate from vacuum evaporation units. On March 9, BAIC BluePark New Energy Technology Co., Ltd. (BAIC BluePark) announced on the Shanghai Stock Exchange its plan ...

OEM Plants  Updated at: 2025/02/21

for the automatic. CO2 emissions are 135 g per km or 142 g for the automatic. The car will be launched in the European market starting in fall in 2012. Prices start at 36,200 euros in Germany. BMW is recalling 30,265 of its X5 SUVs in the United States from model years 2007-2010 to correct a brake vacuum pump leak. On March 13, BMW announced that it has more than doubled its material-handling machines powered by hydrogen fuel cells from 100 unit...

OEM Plants  Updated at: 2025/02/19

Oxford plant will serve as a test site to evaluate its potential for enhancing energy efficiency across BMW Group facilities and commercial buildings in the UK. The project is part of the BMW Startup Garage. Aeromine's wind unit is mounted on building edges which uses vertical airfoils to create a vacuum effect that drives an internal propeller to generate clean electricity. Unlike traditional turbines, the bladeless design minimizes noise, vibr...

OEM Plants  Updated at: 2024/12/10

The six UR10 cobots from Universal Robots, complete a choreographed sequence to sand the entire body surface in just 35 seconds. During the production process, each Fiesta is submerged in a special bath to provide more than ten years of corrosion protection. The six cobots smooths the small flecks vacuum any dust left behind. Final checks are completed by two employees before the vehicle body moves along the line for the primer application. On J...

OEM Plants  Updated at: 2024/12/09

with liquefied aluminum. The Lightweight Construction and Technology Centre in Landshut uses a 120-kilogram 3D-printed robot gripper for CFRP roof production. This gripper, lighter by 20%, extends robot life, reduces system wear, and cuts maintenance. It combines selective laser sintering (SLS) for vacuum grippers and clamps, and large scale printing (LSP) for the roof shell and bearing structure. Double grippers, produced via 3D printing, are no...

OEM Plants  Updated at: 2024/11/02

fficiency, energy conservation, and environmental protection throughout the manufacturing process, and establish a globally integrated environmentally friendly manufacturing management system. The company has made comprehensive improvements to its processes and is working to reduce waste emissions. Vacuum extraction is introduced in NE1 casting core molding. In addition to reducing exposure to smoke and dust contaminants such as silica dust, phen...

OEM Plants  Updated at: 2024/06/14

with liquefied aluminum. The Lightweight Construction and Technology Centre in Landshut uses a 120-kilogram 3D-printed robot gripper for CFRP roof production. This gripper, lighter by 20%, extends robot life, reduces system wear, and cuts maintenance. It combines selective laser sintering (SLS) for vacuum grippers and clamps, and large scale printing (LSP) for the roof shell and bearing structure. Double grippers, produced via 3D printing, are no...

OEM Plants  Updated at: 2023/01/20

Beijing Motor Powertrain Co., Ltd. Engine, Motor, CVT Transmission, MT Transmission Started in Feb. 2010 BAIC Powertrain promotes energy saving, emission reduction On April 22, BAIC Group issued the "BAIC Group 2022 Social Responsibility Report". It is mentioned in the report that BAIC Motor Powertrain Co., Ltd. implemented an energy saving project on the recovery of steam condensate from vacuum evaporation units....

OEM Plants  Updated at: 2022/07/11