a mass-produced e-Axle at an expo in Japan. Specifications of the e-Axle motors exhibited by Nidec The table can be scrolled left and right. E-Axle Gen3, in mass production E-Axle Gen4, in development E-Axle (magnet-free), in development e-Axle configuration 7-in-1 7-in-1 3-in-1 Maximum output 150kW (360V) 100kW 170kW Rated output 45kW 50kW 75kW Maximum torque (motor) 192Nm 126Nm 110Nm Maximum rotation speed (motor) 18,550rpm 18...

Market & Tech Reports  Updated at: 2025/08/29

her thermal efficiency than the conventional Otto cycle, making it suitable for high-power engines. Advantages include a simple system structure, low-pressure atomization, lower mixture temperature due to methanol vaporization, and reduced compression work, which allows methanol to achieve the same output as diesel per unit volume.   Farizon Auto is a new energy commercial vehicle brand under Zhejiang Geely New Energy Commercial Vehicles Group C...

Market & Tech Reports  Updated at: 2025/08/29

ording to the Federation of Thai Industries (FTI), Thailand’s vehicle production in Q2 2025 started with a slight year-on-year (YoY) decline of 0.4% in April. Production rebounded in May, rising 10.3% YoY to 139,186 units, marking the first increase in 21 months, driven by a surge in BEV and PHEV output. Growth continued in June, with production up 12.0% YoY to 130,223 units; however, overall volumes remained modest.   After revisions to earl...

Market & Tech Reports  Updated at: 2025/08/28

lobal leader in tech innovation. It specializes in areas like chip design, data analysis, aerospace, and mobile devices. The state hosts over 400 MNCs with global R&D centers.   Karnataka is the fourth-largest automobile-producing state in India, contributing 8.5% to the country's total automotive output. It is home to major OEMs and component manufacturers such as Toyota Kirloskar, Volvo, TVS Motor, Bosch, etc. The Bengaluru region, recognized ...

Market & Tech Reports  Updated at: 2025/08/27

to the rack gear axis; and (3) RP-EPS, rack parallel type (or belt-drive type) in which the motor axis is parallel to the rack gear axis. Advantages: Driving feel is good because the rack is powered directly. Noise is low because the motor is in the engine compartment. It is easy to increase motor output for use in large vehicles or sports models. Disadvantages: High cost, layout restrictions, water-proofing concerns Pinion-assist type (P-EPS ...

Market & Tech Reports  Updated at: 2025/08/21

oltage power system, steer-by-wire, and other new features.   It is equipped with a lithium-ion battery with a capacity of 123kWh using second-generation 4680 battery cells, giving it a driving range (EPA) of 547km.   The disassembled vehicle is an AWD model with an induction motor with a maximum output of 226kW at the front and a magnet-type synchronous motor with a maximum output of 221kW at the rear.   Large aluminum casting parts made usin...

Market & Tech Reports  Updated at: 2025/08/19

high-performance ferrite magnets. Rare earths are not used. These have the world's highest level of magnetic properties as a ferrite magnet. A prototype EV motor using the latest NMF-15 ferrite magnets has been fabricated, and it was confirmed that approximately 100kW can be obtained as the maximum output. Exhibit: NMF-12, 15 series High-performance ferrite magnets These can be used in drive motors where rare earth magnets have previousl...

Market & Tech Reports  Updated at: 2025/08/15

le equipped with a fuel cell unit The fuel cell unit is mounted under the rear seat, and the high-pressure hydrogen tank and Li-ion batteries are mounted under the front seat. Display panel: Small fuel cell unit Display panel: Overview of fuel cell system The fuel cell unit has an output of 2.5kW and consists of a fuel cell stack, auxiliary components, controller, battery, etc. Fuel cell units can be used for a variety of purpos...

Market & Tech Reports  Updated at: 2025/08/14

ens up advanced interaction possibilities and new use cases, but also contributes to the de-electrification of vehicle areas, weight reduction and thus to the optimization of system costs.   Additionally, light can be combined with displays to share more detailed information as a means of exterior output HMI. Examples of lighting and display applications (Car.HMI Europe 2025, organized by we.CONECT Global Leaders GmbH/slide: Copyright © ...

Market & Tech Reports  Updated at: 2025/08/08

ad expanded production. The new factory zone covers an area of approximately 51,000 square meters, with a building area of 28,000 square meters and a total investment of CNY 200 million. It will be used mainly for the construction of a production line for Mercedes-Benz seat accessories, with annual output value expected to exceed CNY 2 billion when fully operational. Shenyang Lear was established in 2011, and its former plant covers an area of ap...

Market & Tech Reports  Updated at: 2025/08/06

both on test sites and on public roads.   The company also worked with world-leading tire testers such as Applus IDIADA, DEKRA, fka, Smithers Labs, RACELOGIC Ltd. and TREAD Ltd. to ensure that driving conditions and environments are as accurate as possible.   During the tests, the virtual sensor output was compared with physical laboratory results, assessing tires at different stages of their life cycle—new, moderately worn, and worn out. Th...

Market & Tech Reports  Updated at: 2025/08/04

virtual test vehicles with realistic vehicle APIs in the form of low-code, free online SDV prototypes. As an E/E (Electrical/Electronic architecture) starter kit (hardware development environment), it connects to a realistic E/E system on a low-cost Arduino (a single-board substrate with input and output) via the digital.auto playground. The developed products/applications can be tested in an open workspace environment at EDCAR & Garage (real-wo...

Market & Tech Reports  Updated at: 2025/08/01

n sale in stages throughout 2025.   The Grandis uses the CMF-B platform supplied by alliance partner Renault S.A. (Renault) on an OEM basis. Both MHEV and HEV models will be available. The MHEV (mild hybrid) model is equipped with a 1.3L direct-injection gasoline turbocharged engine with a maximum output of 105 kW, and is available with either a 6-speed manual or 7-speed dual-clutch automatic transmission. The HEV model combines a 1.8L naturally...

Market & Tech Reports  Updated at: 2025/07/30

of Japan, Korea and Europe account for the bulk of the remaining full-year LV production forecast downgrade. In contrast, China's LV production outlook remains stable due to low exports to the US and a strong incentive-fueled domestic market. Toyota GroupIn 2025, we expect Toyota Group’s global output to decline slightly by 0.5% YoY, remaining at the previous year’s level of 10.5 mn units. However, as trade negotiations over the new US impo...

Market & Tech Reports  Updated at: 2025/07/28

gh millisecond-level adjustment, it has improved the ability to detect road conditions and enhanced driving comfort and safety. The electric drive system provides closed-loop control and dynamic response with a highly accurate road condition detection capability of 10,000 times/second and real-time output adjustment capability of 1,000 times/second. Specifically, it reduces the impact when parking by 50%, suppresses car sickness when starting and...

Market & Tech Reports  Updated at: 2025/07/22

wn 10% YoY. The Russian LV market declined by 29% YoY in June, with the selling rate falling to 1.13 mn units/yr (-7.9% MoM). Demand remains weak due to the CBR’s high key rate stalling consumer credit growth and auto financing; however, early signs of stabilization are emerging, aided by resumed output at idled plants and government stimulus through the “First Car” and “Family Car” subsidy programs. A potential interest rate cut may su...

Market & Tech Reports  Updated at: 2025/07/22

adar --- 0 GNSS On the roof 1 The device names were chosen based on the source. (Source: Compiled based on information from Advanced Smart Mobility Co., Ltd.) A demonstration operation in Ebina is scheduled for 2025, but the vehicle used will be the previous model, the BYD J6 1.0 (the output seems to be slightly different from the 2.0, but the dimensions are the same). It is owned by Advanced Smart Mobility and has different sensor ...

Market & Tech Reports  Updated at: 2025/07/16

), which is in the same class in terms of size and price, and is eligible for the USD 7,500 U.S. EV tax credit. It will share the same BEV3 platform with the Blazer, Equinox, and Honda Prologue, which are also produced at the Ramos Arizpe plant. The AWD model with two electric motors (total maximum output 300 hp, maximum torque 354 lb-ft) and an 85 kWh battery pack is standard, giving it an estimated range of 300 miles (483 km). Start of produc...

Market & Tech Reports  Updated at: 2025/07/11

V becomes "out of power", allows it to be rapidly charged by using the battery power of a BEV that has arrived and enables the first BEV to drive to a charging spot on its own.   The maximum charging power is 9.5kW (allowing a travel distance of approximately 15km on a 15-minute charge), the input/output voltage is DC150V to DC450V, and the weight of the product is 23kg.  The company has already shipped approximately 100 units.   The display p...

Market & Tech Reports  Updated at: 2025/07/11

ated power electronics and e-motor (160 kW, 60% more electric peak power, 5% less weight). The 4th generation of ZF’s 8-speed automatic transmission offers efficient and flexible performance for PHEVs. Range Extender eRE+ with integrated electric drive and generator system (70 – 150 kW scalable output, 400V and 800V architectures supported, SOP: 2026). The highly integrated design of the eRE+ is flexible in terms of performance, E/E architect...

Market & Tech Reports  Updated at: 2025/07/08