utomotive Technology, will manufacture and sell electric steering systems for commercial vehicles. The new company will be capitalized at CNY 100 million (approximately JPY 2.119 billion), with Tianrun holding a 60% stake and HL Mando holding 40%. Tenryu Mando plans to develop a full lineup of ball nut type electric steering systems (BN-EPS) for commercial vehicles, including light- and heavy-duty trucks and buses, by 2026. Development related: ...

Market & Tech Reports  Updated at: 2025/03/21

s "new energy, smart assist drive, and connectivity," and has continued to increase investment in research and development. It has researched and developed new products and technologies, such as integrated electro-hydraulic power steering (I/E-RCB), electrically adjustable mechanical columns, screw-nut mechanisms, integrated electronic control units (power packs) that integrate a motor and controller, and steer-by-wire (SBW), and has industrializ...

Market & Tech Reports  Updated at: 2024/09/27

of power steering systems as Bosch and Nexteer: hydraulic (HPS), electro-hydraulic (EHPS), and electric (EPS). The electric assist types are column-assist type (C-EPS) and rack-assist type (R-EPS). Of these, the rack-assist type is a belt drive system that uses a combination of belt drive and ball nuts to provide power assist to the rack gears. Production of ZF's electric power steering was started by the former TRW in 2001, and many installed m...

Market & Tech Reports  Updated at: 2024/07/19

Stellantis-FCA Fiat Pulse (Brazil) 2021 Lear Seats Stellantis-FCA Fiat Pulse (Brazil) 2021 TW Espumas Seat cushions Tesla Tesla Model 3 (USA) 2021 Lear 2nd row seat backrest trim 2nd row seat bolster Front seat headrest assembly Tesla Tesla Model 3 (USA) 2021 Faurecia Seat recliner shaft push nut Seat recliner motor Tesla Tesla Model 3 (USA) 2021 Blove Light Precision HK 2nd row seat back projection cover Tesla Tesla Model 3 (USA) 2021 ...

Market & Tech Reports  Updated at: 2023/04/27

o JTEKT and Hitachi AMS, ZF Japan’s product portfolio includes HPS, EHPS, and EPS systems, but currently its sales of power steering systems in Japan is limited to EPS only. The electric assist types are column-assist type (C-EPS) and rack-assist type (R-EPS). Its R-EPS uses a belt drive and ball nut mechanism to deliver power assist to the rack gears. Although the company supplies product to only Mazda in Japan, as previously mentioned, global...

Market & Tech Reports  Updated at: 2022/11/24

is being done in Europe. China is not taking an indiscriminate approach, but instead is implementing a wide range of targeted measures, including the introduction of inner-city and regional regulations. This variety of regulatory options means that it does not need to use a sledgehammer to crack a nut as the Europeans are doing with the ban on combustion engines. With the help of more sophisticated methods, the Chinese have achieved the same obj...

Market & Tech Reports  Updated at: 2022/11/01

M-Tech in Osaka 2022: Cost reduction, Parts Procurement in Asia Weldable castings, knurled nuts, hot-forged rocker arms, procurement in China, Thailand, and Vietnam Summary Cost reduction: Cast joints for frame welding, knurled nuts, hot forged rocker arms Automotive parts made in China: Knuckles, brake air chambers, lost wax precision cast parts Automotive parts made in Thailand: Aluminum inverter cases, suspension towers, sintered gears, rubber...

Market & Tech Reports  Updated at: 2022/10/25

FCA Fiat Pulse (Brazil) 2021 Lear do Brasil Seats Stellantis-FCA Fiat Pulse (Brazil) 2021 TW Espumas Seat cushions Tesla Tesla Model 3 (USA) 2021 Lear 2nd row seat backrest trim 2nd row seat bolster Front seat headrest assembly Tesla Tesla Model 3 (USA) 2021 Faurecia Seat reclining shaft push nut Seat recliner motor Tesla Tesla Model 3 (USA) 2021 Blove Light Precision HK 2nd row seat back projection cover Tesla Tesla Model 3 (USA) 2021 ...

Market & Tech Reports  Updated at: 2022/06/30

High-tensile steel CFRPProcess: Riveting UACJ Corporation(Chiyoda Ward, Tokyo) Front bumper assembly Material: 7000 series aluminum extrusionProcess: Welding PEM Japan Co., Ltd.(Machida City, Tokyo) Electric SUV ES8 by NIO, Inc. of ChinaFull aluminum frame Fastening material: Clinching bolts/nuts (steel)Process: Self-clinching by press-fitting   Lightweight frame, all-new Qashqai (Nissan Motor Co., Ltd.)  This is a lightweight frame f...

Market & Tech Reports  Updated at: 2022/06/06

ith high heat resistance and high insulation, such as epoxy resins. Epoxy resins are used in the packaging of semiconductor parts such as ICs and transistors.   The exhibit includes a plastic motor housing and inverter housing. It is highly heat and vibration resistant. The mating part has a steel nut insert molded into it, which can be tightened to high torque and is lighter than aluminum alloy. Exhibits: Plastic motor housing, inverter hous...

Market & Tech Reports  Updated at: 2022/02/02

o JTEKT and Hitachi AMS, ZF Japan’s product portfolio includes HPS, EHPS, and EPS systems, but currently its sales of power steering systems in Japan is limited to EPS only. The electric assist types are column assist type (C-EPS) and rack assist type (R-EPS). Its R-EPS uses a belt drive and ball nut mechanism to deliver power assist to the rack gears. Although the company supplies product to only Mazda in Japan, as previously mentioned, global...

Market & Tech Reports  Updated at: 2021/12/24

Wh battery.   The driving range of the 2WD 90kWh model is up to 610km (WLTC mode, measured by Nissan), and the battery is equipped with a liquid-cooled temperature control system. It also supports up to 130kW fast charging, and can store enough electric power for up to 375km of driving with a 30-minute fast charge, according to the company.   The 4WD system is an "e-4ORCE" system with two motors, in the front and rear, with independent controls...

Market & Tech Reports  Updated at: 2021/11/18

high voltage system, fast charging capability, extended battery life and class leading safety features. Its battery rating is 30.2 kWh; it has a permanent magnet synchronous motor that generates 129 PS power and 245 Nm torque. The vehicle accelerates from 0 to 100 km/h in 9.9 seconds. It takes 60 minutes for 80% battery charge through fast charging and 8 hours to charge 100% through regular charging. The curb weight is 1,400 kg. The Nexon EV has ...

Market & Tech Reports  Updated at: 2021/02/03

ive Systems, ZF Japan’s product portfolio includes HPS, EHPS, and EPS systems, but currently its sales power steering systems in Japan is limited to EPS only. The EPS types that ZF TRW offers are the column assist type (C-EPS) and the rack assist type (R-EPS). Its R-EPS uses a belt drive and ball nut mechanism to deliver power assist to the rack gears. As previously mentioned, although the company supplies product to only Mazda in Japan, global...

Market & Tech Reports  Updated at: 2020/12/21

of the rack to the pinion side and adjusts the backlash of the meshing area (affecting the steering accuracy and the steering force). Pinion shaft: The pinion shaft turns the pinion gear inside the rack case via the center of the steering torque sensor (black section). The torque sensor converts minute twists of the shaft created by steering torque into a change in the magnetic flux of the built-in magnet. The magnetic detection element recogniz...

Market & Tech Reports  Updated at: 2020/05/08

ive Systems, ZF Japan’s product portfolio includes HPS, EHPS, and EPS systems, but currently its sales power steering systems in Japan is limited to EPS only. The EPS types that ZF TRW offers are the column assist type (C-EPS) and the rack assist type (R-EPS). Its R-EPS uses a belt drive and ball nut mechanism to deliver power assist to the rack gears. As previously mentioned, although the company supplies product to only Mazda in Japan, global...

Market & Tech Reports  Updated at: 2020/03/12

ai suppliers Summary Fusion of trading company functions and manufacturing: precision deep-draw press, carbon brush, low-noise gear, cashew materials Automotive components: High durability decorative key, exhaust flex pipe, Chinese-made bearings Thai automotive parts manufacturers: Forged bolts and nuts, pressed gears, sintered gears, injection plastics   The 24th Mechanical Components & Materials Technology Expo M-Tech (dates: February 26 throu...

Market & Tech Reports  Updated at: 2020/03/06

6th TsubameSanjo Manufacturing Messe 2019: Niigata Auto Parts Lost-wax metal casting, electro-galvanization, DLC piston pins, and Taiwanese manufacturers Summary Manufacturing die suppliers in Niigata Within Niigata prefecture (lost-wax metal casting, galvanization) Suppliers from outside Niigata (DLC piston pin, wedge lock washer, new U-nut, spiral retaining ring) Taiwan suppliers (electrical cable, prototype impeller)   The TsubameSanjo Manufa...

Market & Tech Reports  Updated at: 2019/10/25

of sealing and plastic modules).   The cross car beam is then secured to the instrument panel through these over-molded plastic pins and fasteners. From this integrated structure, it can be said that Tesla likely uses a robotically-installed instrument panel assembly process.   In addition, cage nuts are used to fasten small parts to aluminum materials, where the flow drill screw increases in thickness when it is screwed in, creating its own n...

Market & Tech Reports  Updated at: 2019/04/23

ive Systems, ZF Japan’s product portfolio includes HPS, EHPS, and EPS systems, but currently its sales power steering systems in Japan is limited to EPS only. The EPS types that ZF TRW offers are the column assist type (C-EPS) and the rack assist type (R-EPS). Its R-EPS uses a belt drive and ball nut mechanism to deliver power assist to the rack gears. As previously mentioned, although the company supplies product to only Mazda in Japan, global...

Market & Tech Reports  Updated at: 2019/03/25