kyo Metropolitan Government and Aichi Prefecture.   The Tokyo Metropolitan Government announced the project in September 2025 as part of the "TOKYO H2" project, and more than 100 vehicles are already on the road, with 600 to be introduced by FY2030.   Subsidies of about JPY 5 million/unit for the installation of 5 units in Tokyo, and about JPY 3.5 million/unit in Aichi Prefecture are available, making the purchase cost cheaper than a Toyota JPN...

Market & Tech Reports  Updated at: 2026/04/22

nsmission efficiency in 2021. Step-type AT technology: In February 2020, the company announced the JR913E, a 9-speed AT for RWD layouts, with overall gearbox length and weight at or below those of a conventional 7-speed AT. It has been produced in the Fuji area since September 2019, and after installation in the 2020 model of the Nissan Titan as a replacement for the JR711E 7-speed AT, it is currently available in the Pathfinder, Frontier, ...

Market & Tech Reports  Updated at: 2026/04/17

cle Alerting System) was introduced in response to a safety issue: the quietness of EVs and HEVs makes it difficult for pedestrians to notice approaching vehicles. Following research and guideline development in various countries, an international standard (UN-R138) was established in 2016, and the installation of low-speed alerting sounds became mandatory in Japan, Europe, and the United States. Currently, AVAS is widely used globally as standar...

Market & Tech Reports  Updated at: 2026/04/16

o contributing to the demand and supply adjustment of the power grid as a V2G (Vehicle to Grid) distributed unit, it serves as a clean energy supply source replacing conventional diesel generators through V2L (Vehicle to Load) functionality. CharGo features autonomous driving capabilities, flexible installation options for indoor and outdoor parking scenarios, and efficient energy replenishment due to its DC fast charging and autonomous driving f...

Market & Tech Reports  Updated at: 2026/04/14

sistant design specifically for motorcycles. It takes into account the nature of motorcycles, which are constantly exposed to wind and rain and experience intense vibrations while riding. In addition, the camera and main unit are separate, and all components are designed to be compact, allowing for installation without compromising the bike’s aesthetic appearance or hindering riding performance. Exhibit: Dashcam kit Exhibit: In-vehicle came...

Market & Tech Reports  Updated at: 2026/04/09

Analysis Report: Thermal Management of BEV Batteries (European, American and Chinese Markets) The widespread adoption of battery thermal management systems tailored to market characteristics List of Suppliers Introduction I. Thermal management major functional parts sourcing map II. Overview and trends of thermal management methods III. Overview and trends of major component suppliers IV. Installation status major functional parts by model Valeo...

Market & Tech Reports  Updated at: 2026/03/30

added to this report.   For details on the major Japanese suppliers such as Akebono Brake Industry Co., Ltd. and Advics Co., Ltd., with subsidiaries conducting business with OEMs in Europe and the Americas, please refer to Analysis Report: Brake (Japanese Market). Click here for the latest product installation status ABS/ESC Disc brakes (calipers) Disc brakes (rotors) Disc brakes (pads) 1) Europe A change in product application since 2018 h...

Market & Tech Reports  Updated at: 2026/03/24

he large-scale construction of the Flash Charging network across China.  Regarding the construction method, the main focus will be on Flash Charging station-in-station, utilizing and upgrading existing public charging stations. By adding energy storage systems and Flash Charging facilities, the installation can be realized without allocating additional capacity to the power grid or new sites for charging, promoting construction in partnership...

Market & Tech Reports  Updated at: 2026/03/19

ll. From January to October 2025, major NEV manufacturers such as BYD, Xiaomi, NIO, and XPeng led the industry in the two major functional areas of highway NOA and urban NOA. In the application of high-speed NOA, BYD was far ahead with systems installed in over 1.6 million vehicles, and the vehicle installation rate in vehicles manufactured by Li Auto, Xiaomi, NIO, and Zeekr exceeded 80%. Regarding urban NOA, Xiaomi, NIO, and XPeng all lead, each...

Market & Tech Reports  Updated at: 2026/03/16

e product technology trends of each company cannot be discerned from this report, Suzuki is participating in HySE while also presenting its own technology (some in collaboration with AVL Japan K.K. and Waseda University). Automotive development: There has been no significant development related to installation or practical use in two-wheeled vehicles, and the development has been oriented toward demonstration purposes for four-wheeled racing veh...

Market & Tech Reports  Updated at: 2026/03/11

organized by CTI - Car Training Institute - A division of Euroforum Deutschland GmbH; Slide: © Horse Powertrain） C15   A flat 1.5-liter inline four-cylinder range extender (55–70 kW) with an overall height of approximately 275 mm, enabling high packaging flexibility, including under-seat installation. Available 2027. C15：Available 2027 （Photo at IAA Mobility 2025: Copyright © MarkLines Co., Ltd. All rights reserved...

Market & Tech Reports  Updated at: 2026/03/06

or, and dual-motor BEVs, and has a power supply voltage of 470V (800V is also possible). Single-motor drive inverterSingle-motor drive inverter specification display panel Dual-motor drive inverterDual-motor drive inverter specification display panel   The power block is a sub-unit for installation in an inverter, which consists of a power module and peripheral components such as a drive circuit and busbars.   The DSC power block is...

Market & Tech Reports  Updated at: 2026/02/26

e manufactured more cost-effectively than vehicles with internal combustion engines,” Diesel adds. The BEV production process eliminates numerous components which, in addition to their actual procurement costs, also incur costs for their logistical provision at the plant, their storage, and their installation in the vehicle. A purely electric powertrain can be efficiently integrated into vehicle production as a platform design   According ...

Market & Tech Reports  Updated at: 2026/02/05

improving, with power output, hydrogen consumption and range gradually meeting the requirements of long-distance and cross-regional transport. Initial formation of a voluntary industrial chain Most of the core components for fuel cells are domestically produced in China, and the stage of vehicle installation verification and updating/improvement has begun. Hydrogen energy will achieve step-by-step standardized management Hydrogen energy has ...

Market & Tech Reports  Updated at: 2026/01/21

enerator, an inverter, and an exhaust system. The version equipped with a 70-kW naturally as-pirated engine is intended for the B and C segments, while a turbocharged version with a maximum output of 120 kW is available for higher segments. Its com-pact dimensions make it suitable for front or rear installation in BEVs.   According to Ingo Scholten, CTO of Horse Powertrain, there will however also be a need to install P1/P3 and P2 solutions in B...

Market & Tech Reports  Updated at: 2026/01/19

ROTTENGRUBER _ From a technical point of view, cryogenic (sub-cooled) or liquid storage of hydrogen is particularly suit-able for use in motorsport. Firstly, it pro-vides the highest volumetric storage density, which is a significant advantage when we want to maximize energy capacity with limited installation space and minimal weight. Secondly, so-called boil-off effects, in other words the uncontrolled evaporation of the cryogenic hydrogen, ca...

Market & Tech Reports  Updated at: 2026/01/07

lly becoming standard equipment, and large-scale models are integrating touch controls, visual and voice interaction, and entering the application stage. 1.2 Current market share status -- Statistics and forecasts for automotive intelligent cockpits in China   In 2024, China's intelligent cockpit installations (including digital meters, entertainment systems, HUDs, and domain control systems) totaled approximately 3.55 million sets, a 63% incre...

Market & Tech Reports  Updated at: 2025/12/24

—reflecting a dramatic democratization of advanced lighting features. Market data shows that global demand for ambient lighting components has surged by 50 percent over the past seven years, with strong growth in North America, China, and Europe, while Japan and Korea remain relatively unchanged. Installation locations have also evolved, with lighting now extending beyond doors and footwells to areas such as the roof and instrument panels.  Th...

Market & Tech Reports  Updated at: 2025/12/23

(through August). However, due to the rapid increase in the number of NEVs in the fleet, the number of vehicles per charging stand now exceeds 6.8 since 2021, making significant additional improvements difficult in the short term.   Overall, although the development of charging technology and the installation of charging stations continue to accelerate, energy charging efficiency remains a major issue in the development of NEVs, and a breakthro...

Market & Tech Reports  Updated at: 2025/12/23

ystems to accommodate electrification List of Suppliers Introduction I. Overview of air conditioner market and technology in Europe and the U.S. II. Overview of major air conditioning suppliers (Europe & U.S.) III. List of major air conditioning suppliers by OEM (EU and U.S. production) IV. Product installation status by model V. Sales figures for major air conditioning suppliers Supplier global footprint: By plant, location, and customer Valeo ...

Market & Tech Reports  Updated at: 2025/12/22