Analysis Report: Thermal Management of BEV Batteries (European, American and Chinese Markets) The widespread adoption of battery thermal management systems tailored to market characteristics List of Suppliers Introduction I. Thermal management major functional parts sourcing map II. Overview and trends of thermal management methods III. Overview and trends of major component suppliers IV. Installation status major functional parts by model Valeo...

Market & Tech Reports  Updated at: 2026/03/30

TA updates, so that, for example, an oven (a US TV chef appeared on stage at the press conference) can receive OTA functionalities such as “air fry” or “sous vide cooking.” This then led Bosch seamlessly to OTA in cars; starting with the next sentence the tier 1 presented its Vehicle Motion Management system on the big Las Vegas stage – a system, which reduces motion sickness through control in six degrees of freedom.   However, the au...

Market & Tech Reports  Updated at: 2026/03/26

 achieves a driving range of 1,036km. Key technologies of the 2nd Generation Blade Battery  The 2nd Generation Blade Battery achieves more efficient and uniform heat dissipation while suppressing heat generation through the "Lithium-Ion High-Speed Channel" structure and "Full-Spectrum Intelligent Thermal Management System," effectively minimizing the impact of fast charging on battery life. Furthermore, the capacity retention rate within the wa...

Market & Tech Reports  Updated at: 2026/03/19

a voltage (rated) of 338V and a capacity of 43.9kWh, while the 2S type has a voltage (rated) of 676V and a capacity of 87.8kWh. The battery pack structure is a cell-to-pack system in which cells are arranged directly in a battery pack without modules, similar to BYD's blade batteries, with active thermal management by liquid cooling. Battery System LFP Compact Pack Battery System LFP Compact Pack display screen The Battery System LF...

Market & Tech Reports  Updated at: 2026/03/10

he program featured parallel, domain-specific deep-dive sessions focusing on the latest technological developments in areas such as electric powertrains, electric motors, transmissions, commercial vehicle powertrains, virtual development methods, cost reduction, operating strategies, and energy and thermal management. In addition, prior to the main conference, two pre-event workshops were held: “Mobility Meets Defence” (a workshop exploring o...

Market & Tech Reports  Updated at: 2026/03/06

ned in 2024, and also measured 3D scan data using the latest equipment. Based on this teardown survey and measurement data, MarkLines created and offers for sale the "e-Powertrain, e-Axle: Structural Analysis Report & Motor Cost Analysis Report," the "Battery Pack: Structural Analysis Report," and "Thermal Management: Structural Analysis Report."  This report introduces the motor components included in the "e-Powertrain, e-Axle: Structural Analy...

Market & Tech Reports  Updated at: 2026/03/04

(BOI))   Looking at the BOI-approved projects (automotive-related) for 2025, most of the projects are in the parts sector, including brakes, suspension, air conditioning systems, electrical components, interior components, and metal and plastic fabrication. EV-related content includes battery management systems, thermal management systems, electric powertrain components, and battery packs, as well as content on chargers, charging stations, ...

Market & Tech Reports  Updated at: 2026/02/17

omous driving in China. Honda and Dongfeng are promoting demonstration operations of hydrogen fuel cell powered commercial vehicles.   The Chinese Ministry of Industry and Information Technology (MIIT) has approved two L3 autonomous driving vehicle models. This represents a breakthrough in China's management of intelligent connected cars and marks the entry of autonomous driving technology into a new phase of conditional, large-scale application...

Market & Tech Reports  Updated at: 2026/02/09

understanding of physical laws.   The goal of Changan's "AIEV" architecture is to create a human-like brain and superhuman abilities, promoting cooperative evolution in all driving and cockpit scenarios in full-stack. An architecture that fuses and interacts with the six domains of power, chassis, thermal management, cockpit, smart driving, and vehicle control will be built that achieves three-dimensional intelligent control horizontally, vertic...

Market & Tech Reports  Updated at: 2026/01/27

ts top priority. The company’s strategy is based on a dual approach combining battery-electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs); however, at present it is placing greater emphasis on BEVs due to their superior efficiency. This is because electric powertrains involve minimal thermal losses and can convert energy into driving power in the most efficient manner. As a result, commercial operations are already viable in applic...

Market & Tech Reports  Updated at: 2026/01/22

ms, UX designers, trim suppliers, and lighting engineers. For both carmakers and suppliers, this was a revolution in approach and process.  The technical challenges were significant. Early implementations required mastering the LIN communication protocol, managing LED binning, and ensuring precise thermal control. Color consistency demanded advanced calibration and end-of-line testing, often using camera-based systems. These complexities introdu...

Market & Tech Reports  Updated at: 2025/12/23

r 800V and above platforms. The table can be scrolled left and right. Increased dielectric strength requirements As voltages increase, insulation systems are required to have both high electrical performance (corona discharge life, dielectric breakdown field strength, low dielectric loss) and thermal performance (thermal conductivity, heat resistance, resistance to degradation). Material upgrades: Fillers with high dielectric breakdown fiel...

Market & Tech Reports  Updated at: 2025/12/23

sent to the condenser. Here, the high-temperature, high-pressure refrigerant releases heat as it passes through the condenser, in which many rows of thin tubes are arranged, and is transformed into a low-temperature, high-pressure liquid refrigerant. The condenser is made of aluminum with excellent thermal conductivity and has many fins to improve cooling performance. Next, in the receiver-dryer, low-temperature, high-pressure liquid refrigerant ...

Market & Tech Reports  Updated at: 2025/12/22

and improved power consumption as a unit. Transaxle unit mockup Display screen of parallel 3-axle transaxle unit mockup TPR: Thermoelectric clay, bearing bushing with outer periphery protrusion, hollow shaft   TPR Co., Ltd. (TPR) exhibited carbon nanotubes (CNTs) up to 2mm in length and thermal conductive clay, a clay-like thermal interface material (TIM) using CNTs as a filler.   Thermoelectric clay has a thermal conductivity of 3W/...

Market & Tech Reports  Updated at: 2025/12/17

aracterized by powerful body lines and based on a "future classic" exterior design concept. Two rear styling specifications are available: "rear box version" and "spare tire version.”   The powertrain is equipped with the company's proprietary "Golden Range Extender" technology, which achieves a thermal efficiency of 45.79%. 1L can generate 3.71kWh of electricity. Equipped with a 34.3kWh lithium iron phosphate battery, the vehicle has a pure e...

Market & Tech Reports  Updated at: 2025/12/16

Japan Mobility Show 2025: BEV and FCEV trucks and buses CV OEMs’ multi-pathway strategies and BYD’s Japan-specific BEV light-duty truck Summary Business environment and each OEM's strategy - From the press briefings Summary of exhibited vehicles: BEV, FCEV, Engine-equipped vehicles Important technologies seen in the exhibits: hydrogen and fuel cell, BEV thermal management, L4 autonomous driving   The Japan Mobility Show 2025, organized by th...

Market & Tech Reports  Updated at: 2025/12/16

ugh switched reluctance motors and other new motor technologies are still in the exploratory stage and have small market shares, their potential cannot be ignored in the future because of their stability under high temperature and high load conditions. 3.1 FinDreams (BYD) 3.1.1 Company overview and management strategy In 2024, BYD sold 4.27 million NEVs worldwide, up 41% from the previous year, of which 1.76 million were BEVs, accounting for more...

Market & Tech Reports  Updated at: 2025/12/11

135kW to 190kW; the maximum output of the new motor is 150kW. The hydrogen tank capacity has increased from 6.33kg in the previous generation model to 6.69kg. its range is up to 826km under the WLTP standard. NEXO FC stack FC stack left side (hydrogen/air supply system) FC stack right side (thermal management system) NEXO FC system explanation screen   Hyundai had a corner of their booth introducing the history of FCEV dev...

Market & Tech Reports  Updated at: 2025/12/11

cars, emphasizing efficiency sustainability and reduced environmental footprint.   Some key features of the Etelligent Platform are: high power density eMotors (compact and presenting good performance), integrated power electronics (seamless integration of inverters and controls systems), advanced thermal management, modular design (providing scalability and easy adaptation through customization) and sustainability. Denso Click here to see recen...

Market & Tech Reports  Updated at: 2025/12/09

SAE China 2025: The Intelligent Driven Future BYD, XPeng, CICV Summary BYD: Development Path and Practice for the Integration of Intelligent and Electrification Technologies XPeng: Data-driven Intelligent Upgrade of Thermal Management CICV: Development Status and Innovative Technologies in the Intelligent Connected Car Industry   The 32nd Annual China Society of Automotive Engineers Congress and Exhibition (SAECCE 2025) was held in Chongqing fro...

Market & Tech Reports  Updated at: 2025/12/05