ting in a smooth and powerful launch. FR1 Motor Hybrid Transmission Motor of FR1 Motor Hybrid Transmission   The functionally integrated electric drive unit (Xin1) integrates not only the motor, inverter, and reducer, but also an OBC (on-board charger), DC-DC converter, DC-AC converter, junction box, thermal management device, and integrated control ECU (electronic control unit), improving energy efficiency and ease of installation. ...

Market & Tech Reports  Updated at: 2025/11/21

ehicle at a maximum of 150kW with CHAdeMO and 180kW for NACS, or two vehicles at 90kW maximum simultaneously. Orders are expected to be received by the end of 2025, and deliveries are scheduled to begin in 2026. CHAdeMO / NACS compatible fast charger Terra 184 JN Normal charger Terra AC Wallbox 9.6kW   The Terra AC Wallbox 9.6kW normal charger, which ABB exhibited for the first time as a reference exhibit, is a high-output type AC ch...

Market & Tech Reports  Updated at: 2025/10/15

s (valve block, electric compressor) Thermal management display panel BYD Yangwang U8 battery   The U8 is equipped with a 605V lithium-ion iron phosphate battery (short blade battery) with a capacity of 49.05kWh and a total of 189 cells.   The battery pack contains three battery modules and a junction box. It is water-resistant and watertight and is navigable for 30 minutes in water. Battery pack Battery module Battery case Battery d...

Market & Tech Reports  Updated at: 2025/10/14

there was a display panel showing the appearance of the battery pack, which functions as a structural component of the vehicle body.   The battery pack consists of 1,344 4680-type cells with a tabless structure, which are welded together. High-voltage battery cell exhibitHigh-voltage unit (junction box, control board, busbar) Display panel for high-voltage pack and high-voltage unit 48V battery (pack components) exhibit   T...

Market & Tech Reports  Updated at: 2025/08/19

inverter display panel X-in-1 controllerX-in-1 controller display panel   The X-in-1 controller integrates an inverter with a maximum current output of 600Arms using an 800V SiC power module, with a 6.6kW OBC (on-board charger), a 3kW bidirectional DC-DC converter, PDU (power distribution unit (junction box)), BMU (battery management unit), and VCU (vehicle control unit).   TE Connectivity plc.: Junction boxes, high voltage relays   TE Conn...

Market & Tech Reports  Updated at: 2025/06/26

POWER Gen 2 e-POWER   e-POWER is a series hybrid system in which the engine drives a generator to generate electricity, which is then used to drive the motor. On display at the venue was the complete electric powertrain, including the engine, generator, drive motor, reducer/speed increaser (gearbox), and inverter.   The first-generation e-POWER was installed in the Note launched in 2016 and the Serena launched in 2018, while the second-gener...

Market & Tech Reports  Updated at: 2025/06/16

ed on two battery systems for high-performance applications. Its 400 V system houses three 120 V battery modules using 21700 NMC cylindrical lithium-ion cells to provide a total capacity of 31.5 kWh. A variety of safety systems are integrated into the battery pack including a BMS and a high-voltage junction box (HVJB). ElringKlinger's Rollbond cooling plate uses liquid-cooling to help the battery maintain an optimal temperature, while its ElroFoa...

Market & Tech Reports  Updated at: 2024/11/12

(electric oil pumps) EOPs, SBW actuators Gears for EVs and SBW display panel KONEC: Motor and inverter cases   KONEC Co., Ltd. (KONEC) is a company that performs integrated production of die manufacturing, high-pressure aluminum alloy die casting, and precision machining, and mass-produces gearbox housings and ICCU (Integrated Charging Control Unit) housings, and other products for Hyundai/Kia, Hyundai Mobis, and Tesla.   The company also m...

Market & Tech Reports  Updated at: 2024/10/10

a run-up of fast charging connectors, mainly connectors for CHAdeMO, including connectors for V2X (which have a smaller current capacity than those for fast charging).   Also on display was a two-pole high-current connector for DC wiring used to connect the power transfer connector to the battery, junction box, etc. inside BEVs (battery electric vehicles). Exhibit of fast charging connectors Fast charging connector lineup explanation pane...

Market & Tech Reports  Updated at: 2024/07/11

S architectures for EVs by abstracting the communication and controlling interactions between the BMS microcontroller and the battery cell controllers.NXP's HVBMS RD is a scalable ASIL D architecture composed of three modules: a battery management unit (BMU), cell monitoring unit (CMU), and battery junction box (BJB).Utilizing EB tresos (AutoCore, AutoCore OS, and RTE), NXP's reference application software and Complex Device Drivers (CDDs) are de...

Market & Tech Reports  Updated at: 2024/01/29

mass production for European passenger cars. Thermal Management ModuleThermal Management Module display screen (chiller side) Thermal Management Module display screen (valve side) Oil cooling module for xEV   Yazaki Corporation: Booster DC-DC converter, battery series-parallel switching junction box Booster DC-DC converter, junction box   Yazaki Corporation exhibited a booster DC-DC converter and a battery series-parallel sw...

Market & Tech Reports  Updated at: 2023/12/12

e company’s mainstay products, batteries for hybrid vehicles and capacitive lithium-ion battery cells, were on display.   The HEV (hybrid electric vehicle) battery pack is a lithium-ion battery pack for the Toyota Yaris with two rows of 28 cells for a total of 56 cells.   The battery pack has a junction box section, and a Denso Corporation DC relay is used as the power relay that can interrupt the power supply.   The capacitive type battery ...

Market & Tech Reports  Updated at: 2023/11/30

ectionRear side e-Axle section   BYD U8   The BYD Yangwang luxury brand U8 off-road SUV was also on display at the event.   This is an amphibious off-road SUV, and although it does not have an in-wheel motor, each of its four wheels is equipped with a motor along with a reduction gearbox, so the vehicle can rotate on the spot a full 360 degrees (a so-called tank turn) by controlling the four independent motors.   Foxconn (MIH Con...

Market & Tech Reports  Updated at: 2023/11/17

ressway Level 4 road tests (TuSimple)   TuSimple Holdings, Inc. (TuSimple), a self-driving truck technology company headquartered in San Diego, USA, conducted road tests equivalent to Level 4 autonomous driving on the Tomei and New Tomei expressways between the Atsugi Minami interchange and Toyota junction (JCT). The project began in January 2023 and has completed a total of 41,605km of autonomous operation as of October, 2023. Driving videos ar...

Market & Tech Reports  Updated at: 2023/11/10

ssified as a designated small motorized bicycle, and as such it can be operated as a senior citizen car without a license.   The prototype on display had two in-wheel motors with a maximum output of 250W, but a new model under development will have a single 250W motor combined with a reduction gearbox to achieve a maximum speed of 12km/h and 20° hill climbing ability.   Yamaha Motor Engineering Co., Ltd.: Development of small electric vehicle ...

Market & Tech Reports  Updated at: 2023/10/04

in drive wheel, and the AWD (4WD) front is the auxiliary drive wheel, which is activated when the vehicle is slipping or during acceleration.   The electric powertrain is integrated into an e-Axle that integrates the motor, inverter, and reduction gear, and has a front EDM and a rear EDM, with the junction box mounted on top of the front EDM (Electric Drive Motor).   The cooling system for the entire electric powertrain is liquid-cooled (LLC (l...

Market & Tech Reports  Updated at: 2023/09/21

ront/rear drive units (motor/inverter)   The front subframe is equipped with a 3-in-1 type front drive unit and the rear subframe is equipped with an 8-in-1 type rear drive unit.   Many BEV e-Axles of other manufacturers use a 3-in-1 type e-Axle consisting of a drive motor, speed reducer (or, gearbox), and inverter, the BYD Seal uses a 3-in-1 type in the front. However, In the rear, a drive motor, speed reducer, and inverter, as well as a vehic...

Market & Tech Reports  Updated at: 2023/08/28

ing interface is an interface required for prototype or low-volume production BEVs to support fast charging, and incorporates communication protocols and other control functions required for connecting the on-board high-voltage battery to a CHAdeMO or CCS fast charge port.   There are two types: a box type in an independent housing and a circuit board type built into a junction box or other device.   TE Connectivity: Charging inlets, CI 500 hig...

Market & Tech Reports  Updated at: 2023/07/13

t of 500kW, achieving a maximum power density of 70kW/L.   It uses a SiC power module with a withstand voltage of 1200V and can be controlled at a variable switching frequency of 2kHz to 22kHz, but the details of the power module were not disclosed. PUES: 800V SiC inverter, printed circuit board junction box   PUES Corporation displayed an 800V SiC inverter from McLaren Applied. McLaren Applied is an affiliate company of McLaren, known for Fo...

Market & Tech Reports  Updated at: 2023/07/10

ry RT12100G31 is an IP67 lead-acid battery replacement battery that has a built-in heater to compensate for its weakness at low temperatures, as well as the ability to check battery status with a smartphone via Bluetooth communication.   Kyoho Machine Works: General-purpose laminated cell modules, junction blocks, bus bars Laminate type battery module, extruded aluminum battery case   Kyoho Machine Works, Ltd. is also involved in the f...

Market & Tech Reports  Updated at: 2023/04/21