nt electrolytic corrosion of the bearing, are installed near the bearing on the gearbox side cover.   The motor housing is not cast aluminum, but extruded aluminum with a water jacket hole for liquid cooling, and the joining surface of the die-cast aluminum housing and cover is sealed with a metal gasket to make it watertight. HousingCover Display panel for motor teardown Inverter   The inverter was exhibited in a way that its intern...

Market & Tech Reports  Updated at: 2025/08/19

ntribute to making fuel cell stacks smaller and more powerful, and the pre-coated titanium is pressed to ensure high productivity. The FC stack (2nd generation) used in the Toyota Mirai, which uses NC titanium material, was also exhibited at the venue.   Sumitomo Riko: Separator with double-sided gasket The separator with double-sided gasket is made by integrating rubber sealing material (gasket) that prevents leakage of hydrogen, oxygen, and ...

Market & Tech Reports  Updated at: 2025/03/21

able in single-sided and double-sided cooling versions, as well as I-flow and U-flow versions with different coolant connection positions.   LFP blade battery Intercell eCoolers   ElringKlinger: Battery modules, cell contact systems German parts supplier ElringKlinger AG, which handles gaskets for ICE vehicles, exhibited battery modules, cell contact systems, and other products at the expo. The Performance - Battery module is a cyli...

Market & Tech Reports  Updated at: 2025/02/28

rformance, reliability, safety, and cost reduction of EV batteries.   The exhibits showcase a variety of EV battery assembly solution products.   The company supplies thermal management materials for EV battery assemblies, including heat insulators, thermal conductive materials, coatings, sealing/gasket materials, and adhesives.   Silicone rubber applications in EV batteries Exhibit: Battery components Display panel: Silicone rubber applica...

Market & Tech Reports  Updated at: 2025/02/14

g unit is a proposal to increase thermal transmittance by 1.7 times by attaching an aluminum cooler to a steel battery case with an opening so that the cooler comes into direct contact with the heat-conductive material of the battery case. The opening is sealed and joined with FIPG (Formed In Place Gasket) to maintain waterproofness. FTS exhibit (Fuel component technology utilization initiatives) Cooler-integrated battery case aluminum coo...

Market & Tech Reports  Updated at: 2024/03/07

rm a 2P172S (2-parallel 172-series) configuration for an overall pack with 384 cells.   The pack's tray structure is constructed from welded aluminum extrusions and a glass fiber composite skid plate, and the steel lid is attached with threaded fasteners and sealed with an injection-molded polymer gasket. Battery packs, modules, cells (Source: Munro & Associates, Inc.) Outline of battery specifications (Source: Munro & Associates, Inc.)...

Market & Tech Reports  Updated at: 2023/09/21

oration, Kojima Group(Toyota City, Aichi Prefecture, Japan) ASR, recycling of mixed plastics from waste home appliances, bumper recycling, hybrid cases, deck panels with reduced friction resistance, etc. Development, design and production of interior and exterior components for automobiles Nippon Gasket Co., Ltd.(Toyota City, Aichi Prefecture, Japan) Engine parts made from recycled CFRP waste materials, cargo drone parts, FC stack terminal plat...

Market & Tech Reports  Updated at: 2023/03/30

l for inter-cell insulation, and by using a polycarbonate sheet between cells in the battery module, it will contribute to preventing the spread of fire in the cells.   Also on display were phenolic resin molding materials for battery trays and covers.   Dana Incorporated: Battery cooling plate, gasket   Dana's Battery Cold Plate is a product of the company’s Long brand of engine heat exchangers and is a battery cold plate made of lightweig...

Market & Tech Reports  Updated at: 2023/03/08

r of the photo), and while conventional EV battery cover seals are produced by compression, it has the largest injection molding machine in Korea (2,000t, size: 1,600×2,100mm), which enables the company to produce products with high productivity and quality. Rubber auto parts such as rubber gaskets, roof rail cushions, etc. EV battery pack housing seal   Daewoong RT: O-rings for hydrogen piping, carbon fiber composite resin products ...

Market & Tech Reports  Updated at: 2022/12/08

iPrep®), zirconium-based conversion coatings and passivates for enhanced corrosion protection and paint adhesion (Interlox®) and a sustainable paint remover for fixture cleaning (Master Remover®), as corrosion protection coatings adhere best to clean housing surfaces.   Henkel AG & Co.KGaA Foam gasketing for battery packs   The sealing of the battery pack requires gasketing material between the battery pack housing and the lid, with the prim...

Market & Tech Reports  Updated at: 2022/08/17

nd drive motor removed from vehicle Air compressor   The FC stack is the core part of the fuel cell and holds stacked cells with integrated electrodes and separators, and supplies hydrogen, air, and coolant to generate electricity. The FC stack consists of 330 stacked cells, which are sealed by gasket seals, with hydrogen gas, air, and coolant supplied from the manifold. The cell layers are held together by the fastening load of the stack cas...

Market & Tech Reports  Updated at: 2022/08/16

packaging all of these components efficiently together in a single unit, carmakers can free up significant space within the powertrain compartment compared to packaging these components individually. Sprint Power’s PMU measures just 440 × 320 × 130mm.     ElringKlinger metal-elastomer gasket in jigsaw puzzle design (The Battery Show Europe 2022, organized by © 2022 Informa Markets, a trading division of Informa PLC.)   Besides ...

Market & Tech Reports  Updated at: 2022/08/01

items Remarks Taiho Kogyo Co., Ltd.(Toyota City, Aichi Prefecture, Japan) Battery cooler (electric blower with integrated duct)- Motor coil oil cooling system- PCU thermal management EV drive components ・FC stack manifold (end plate)・FC stack pressure plate FCV fuel cell components Nippon Gasket Co., Ltd.(Toyota City, Aichi Prefecture, Japan) ・FC Stack Terminal No. 2 FCV fuel cell components Note: FC stack: fuel cell package. The o...

Market & Tech Reports  Updated at: 2022/03/22

case Precision casting PCU for BEV and HEV Hokuriku Light Metal Industry Inc. Inverter case Precision casting, low cost PCU for BEV and HEV Nihon Parkerizing Co., Ltd. Aluminum and resin bonding strength treatment Bond strengthening PCU, ECU, etc. NOK Corporation Aluminum corrosion resistant gaskets and grease Corrosion resistance PCU, ECU, etc. High heat-resistant, high-current FPC Smaller and faster Power module   Alphatec: Inverte...

Market & Tech Reports  Updated at: 2021/09/24

odes and separators are integrated, and generates electricity by supplying hydrogen, air, and cooling water. In addition, auxiliary components such as pumps, compressors, and valves are installed around the stack to make up the FC system.   The FC stack is a stacked structure of 330 cells, and the gaskets between the cells are required to seal hydrogen gas, air, and cooling water, and to prevent seal failure due to cell stacking misalignment, ev...

Market & Tech Reports  Updated at: 2021/09/01

rt. The throttle body draws air downward. Viewed from above as installed in the vehicle. Thickness is reduced to increase internal volume. The mating surface is attached to the adaptor part shown in the photo below. Adaptor. The photo shows the mating surface to the cylinder head and the gasket. Mating surface to the plastic part. The EGR outlet is protruding and penetrates into the plastic part. The EGR passage has a large bend.  ...

Market & Tech Reports  Updated at: 2020/11/09

anical compressor Denso Interior HVAC unit Valeo Condenser Valeo   ------------------ KeywordsTeardown, BMW, 3 Series, Air Intake System, Air Cleaner, Surge Tank, Throttle Valve, Intake Manifold, Exhaust System, Catalyst, OBD, Lambda Sensor, Bracket, Muffler, Tail Pipe, Heat Shield, Damper, Gasket, Actuator, Drive System, Transmission, AT, ATF Cooler, Radiator, Crossmember, Engine Mount, Fastener, Acoustic Insulator, Propshaft, center bea...

Market & Tech Reports  Updated at: 2020/04/16

el MY Supplier Parts Volkswagen Jetta (Mexico) 2019 Behr-Hella Thermocontrol GmbH Front Climate control unit Volkswagen Atlas (USA) 2018 Air International (USA) Inc. HVAC assembly Toyota Avalon (USA) 2019 ABC Group, Inc. HVAC distribution system Toyota Tacoma (USA) 2016 Plastomer Corp. HVAC gasket Toyota Tacoma (USA) 2016 Plastomer Corp. HVAC seal Toyota Lexus RX (Canada) 2015 Denso Air conditioner Toyota Tacoma (USA) 2015 Tokai Rik...

Market & Tech Reports  Updated at: 2019/06/07

er and lower structures made of pressed High-Tensile (High Tensile Strength Steel) of which multiple structural components are welded and fastened internally. The whole pack is supported by 3 solid beams and is mounted on the vehicle body by 6 mounting “legs”. After installation of the cells, a gasket is installed on the mating surface of the upper cover and fixed with bolts. The inner surface of the upper case (cover). A black gasket ...

Market & Tech Reports  Updated at: 2018/12/06

surface with the transmission is tightly maintained along with the cylinder block, increasing rigidity and removing the resonance point from the actual engine speed operating region. At the lower surface of the upper oil pan is a metal oil pan that serves as a cover and is installed using a liquid gasket. Cylinder block (Top deck side) Cylinder block (Crankcase side) Upper oil pan  The cylinder head is an aluminum alloy formed by low...

Market & Tech Reports  Updated at: 2018/11/05