cone-based adhesive. By increasing temperature and humidity, curing time can be drastically reduced. Loctite MS 9650 delivers strong, durable bonds with excellent vibration resistance, creep behavior, and UV resilience, making it well-suited to automotive display.  Additionally, it is suitable for lightweight vehicle assemblies, contributing to energy-efficient vehicles overall. Based on Henkel press release ...

News  Updated at: 2025/12/19

mid-2026, the combined company will list on Nasdaq under the ticker symbol FAC. Cartesian III currently holds approximately USD 276 million in cash in trust. Assuming no redemptions, the Combination will result in a pro forma equity value of approximately USD 1.5 billion. Factorial’s high-power, lightweight, solid-state batteries have demonstrated real-world performance, including over 1,200 km (745 miles) of driving range on a single charge w...

News  Updated at: 2025/12/19

Autoneum supplies sustainable interior and exterior components for Polestar 5 Autoneum Holding Ltd. (Autoneum) has supplied lightweight, fully recyclable polyester-based interior and exterior components for the Polestar 5 electric grand tourer, which was revealed at IAA Mobility 2025 and is available in 24 markets. Developed over five years in close collaboration with Polestar, Autoneum’s monomaterial recycled polyester and latex-free component...

News  Updated at: 2025/12/18

JETOUR launches three hybrid models in Oman On December 12, JETOUR launched three hybrid models, the G700, T2 i-DM, and T1 i-DM, at the Bidiyah Festival in Oman. The G700, built on the GAIA platform with the i-DM Off-road system, produces 665 kW of power. The G700 also features four displays, NAPPA leather massage seats, and a Lexicon audio system. While the T2 i-DM and T1 i-DM offer lightweight efficiency, longer range, and advanced hybrid perf...

News  Updated at: 2025/12/16

sia launched the all-new Leapmotor B10, a C-segment electric SUV. Built on the LEAP3.5 architecture with CTC 2.0+ integration, the B10 measures (LWH) 4,515x 1,885x 1,655 mm with a 2,735-mm wheelbase. It offers a lower center of gravity, 50:50 weight distribution, and a rigid 36,360 Nm/deg body. Its lightweight rear-wheel-drive motor delivers 218 hp and 240 Nm for a 0–100 km/h time of 8 seconds. Two variants are offered: the B10 Life, from MYR 1...

News  Updated at: 2025/12/12

removing magnesium, which has a high carbon footprint, and replacing it with a lower-carbon alternative while keeping all JLR’s luxury standards. The material was developed with Celanese (US), CCP Gransden, and Petford Group (UK). After rigorous testing, the hybrid structure proved strong, stiff, lightweight, and effective at absorbing energy in a crash, while still keeping the dashboard structure intact. The innovation supports JLR’s Reimagi...

News  Updated at: 2025/12/11

Fuyao Group settles new aluminum trim project in Chongqing Fuyao Glass Industry Group Co., Ltd. (Fuyao Group) signed a project on the intelligent manufacturing of lightweight aluminum trims in Chongqing’s Wansheng Economic & Technological Development Zone. With a planned total investment amount of CNY 1 billion, the new project encompasses six types of high-end automotive aluminum alloy trims. Upon full commissioning, the project is expected to...

News  Updated at: 2025/12/08

H-One to propose single-punch stamping for large stamped automotive parts as lighter, lower-cost solution H-One Co., Ltd. (H-One), a company specializing in pressing parts primarily for Honda Motor Co., Ltd. (Honda), has developed a single-punch stamping technology to produce large-sized stamped parts, such as rear floor panels. This technology uses lightweight, highly rigid hot-stamped (hot-pressed) materials and cold-pressed materials. It can m...

News  Updated at: 2025/12/05

fety or performance. With the LFP battery and a “cell-to-pack” layout, battery costs drop by about 20%. The car also has very low running costs, with best-in-class energy efficiency achieved through an efficient motor and improved aerodynamics. This allowed Renault to keep the battery small and lightweight. Renault Twingo E-Tech electric was developed and industrialized in under 100 weeks. Ampere, Renault Group’s EV-focused division, led th...

News  Updated at: 2025/12/01

FORVIA HELLA unveils sustainable demonstrator headlamp from NALYSES research project Hella GmbH & Co. KGaA (FORVIA HELLA) announced the results of the 3-year NALYSES research project with a demonstrator headlamp designed to reduce CO2 footprint, enable circular-economy concept, and meet all functional and regulatory requirements. The headlamp features a lightweight design, a reduction of components with functional integration, improved energy eff...

News  Updated at: 2025/11/26

nounced that its resin tube for cooling pipe hoses has been adopted for Toyota Motor Corporation’s bZ4X electric vehicle (EV). The resin tube is mounted on an underfloor area from the vehicle front to the rear and near the e-axle and other motor parts. The resin tube, which is made of a low-cost, lightweight resin material, has replaced conventional rubber hoses. The resin tube offers about an 80% reduction in weight compared to conventional tu...

News  Updated at: 2025/11/26

University of Technology Thonburi (KMUTT), delivered a keynote at EV Tech Forum 2025 in Thailand titled “Micro EVs: A New Step in Automotive Innovation for a Sustainable Future.” The keynote highlighted small e-mobilities, including e-motorcycles, e-tuk-tuks, e-tricycles, and L7e-class EVs, as lightweight, energy-efficient solutions ideal for dense urban areas and well suited for first-mile/last-mile links to BTS and MRT systems. Key priorit...

News  Updated at: 2025/11/25

, indirectly serves traditional automakers including BMW, VW Group, FAW Hongqi, and Audi, as well as emerging automakers including Xiaomi EV and XPeng. Upon completion of the acquisition, Jinbei Auto will become the controlling shareholder of Chn-Top Moldings, and will thus expand into the field of lightweight parts for the exploration of new business growth points to enhance its sustainable profitability and comprehensive strength. From a Jinbei...

News  Updated at: 2025/11/21

he foundation stone for the new manufacturing facility was laid at JBM’s Neel Metal Products Ltd. plant in Chakan, Pune, with an investment of INR 1.5 billion. The plant is scheduled to be operational by the second quarter of FY 2027. The upcoming facility will focus on producing safety-critical, lightweight, high-strength auto components for both internal combustion engine (ICE) and electric vehicles (EVs). Hot stamping enables the creation of...

News  Updated at: 2025/11/20

Borouge, UAE to supply lightweight materials for ROX Motor’s ADAMAS SUV On November 18, Borouge announced that its advanced lightweight polyolefin solutions will be used in 17 components of the ADAMAS SUV, the new global flagship from ROX Motor. The agreement strengthens efforts to localize production and develop a future-ready automotive industry in the UAE. Borouge’s advanced materials are made to reduce vehicle weight, improve energy effic...

News  Updated at: 2025/11/18

Marelli presents LeanExhaust platform, lightweight exhaust system Marelli has introduced the LeanExhaust platform, a compact and lightweight exhaust system developed to meet carmakers’ demand for weight and volume reduction in internal combustion and hybrid vehicles. Compared to conventional exhaust systems, the solution delivers a 16 kg overall weight reduction while exceeding or matching noise-reduction and emissions-control performance. It a...

News  Updated at: 2025/11/18

ade from BASF’s Elastollan thermoplastic polyurethane (TPU) processed with Supercritical Fluid (SCF) injection foaming technology, supports customized production and sustainability. In particular, it is the first time to make headrests and armrests from Elastollan. Elastollan’s features include lightweight properties, abrasion resistance, a soft-touch feel, and a premium look. Its applications in automotive interior parts is expanding. (From ...

News  Updated at: 2025/11/14

Webasto exhibits innovative roofs, intelligent cockpit solutions at 8th CIIE At the 8th China International Import Expo (CIIE), Webasto exhibited the latest achievements in electrification, intelligentization, carbon reduction, and comfort. The key exhibits were the world’s first ultra-large double-opening panoramic sunroof, a lightweight all-fabric folding roof, and a roof cinema system. The panoramic sunroof allows for front and rear double ...

News  Updated at: 2025/11/12

he DT12-VL, the latest addition to its DT12 Vocational transmission portfolio. This purpose-built automated manual transmission is engineered for heavy-duty vocational applications where maximizing payload is critical. The DT12-VL delivers enhanced off-road performance and superior drivability in a lightweight package. Production of the DT12-VL is planned to begin in December 2025. Compatible with the Detroit DD13 engine, the DT12-VL is available...

News  Updated at: 2025/11/11

technology with Castrol’s expertise in advanced thermal fluids and battery thermal management. The partnership aims to enhance battery thermal management for passenger cars and trucks using direct battery cooling. This method allows faster charging and discharging by submerging battery cells in a lightweight dielectric fluid. Castrol ON EV Thermal Fluids will help improve heat dissipation, increase power density, and extend battery life and saf...

News  Updated at: 2025/11/10