of its EXP01 processor built on the RISC-V architecture at the RISC-V Summit Europe 2025, which was held from May 12-15, 2025, in Paris. ECARX showcased EXP01, its first processor design built on the 32-bit RISC-V ISA. EXP01 uses a dual-core safety architecture in which two identical cores run in unison to continuously verify each other’s operation, earning it the highest level of functional safety certification, ISO 26262 ASIL-D. This fail-saf...

News  Updated at: 2025/05/16

tely one year of field testing with pilot customers. The first deliveries are scheduled for 2025. The controller supports charging powers of up to 3.75 megawatts. Using MCS, a typical truck battery can be charged to 80% in around 45 minutes. The communication interface is based on the international ISO 15118-20 standard and uses Ethernet-based communication. The connector system complies with the IEC TS 63379 technical specification. vSECC.MCS al...

News  Updated at: 2025/05/12

Infineon achieves ASIL-D functional safety certification for SEMPER NOR Flash memory family On May 8, Infineon Technologies AG announced that SGS-TÜV has certified Infineon’s industry-leading SEMPER NOR Flash memory to ASIL-D, the highest certification level for functional safety. Following a detailed analysis of product safety documentation under the ISO 26262:2018 standard, external experts have validated that SEMPER devices meet the most st...

News  Updated at: 2025/05/09

on of objects such as vulnerable road users and lost cargo, enabling OEM to develop advanced applications such as navigation on autopilot. In combination with NXP’s mmWave radar transceivers, power management and in-vehicle networking solutions, the S32R47 family also meets functional safety ASIL ISO 26262 ASIL B(D) requirements. It is already sampling to lead customers and targets next-generation OEM platforms. (From a press release dated May ...

News  Updated at: 2025/05/09

’s Born Electric Vehicle lineup. The battery has undergone comprehensive testing based on international safety standards, including fuel fire, nail penetration, and rollover tests, conducted at Mahindra's R&D facilities and FEV’s eDLP test center near Leipzig, Germany. The tests adhered to IEC, ISO, UL, SAE, and AIS standards, with AIS being critical for the Indian market. The joint development was completed in two years, with a focus on redu...

News  Updated at: 2025/05/08

telligent driver assistance features for passenger vehicles and meets the requirements for instrument panels and infotainment systems. It enables cockpit-driving-parking integration. At the software level, Banma Info Tech has empowered the solution with triple safety assurance. Firstly, Banma Hypervisor has passed the ISO 26262 ASIL-D certification and supports the virtualization of cockpit-driving integration. Secondly, Banma Info Tech provides ...

News  Updated at: 2025/04/22

ooted up the AC7870 automotive-grade MCU (Microcontroller Unit) chip. The chip will be officially launched at the electronica China 2025 to be opened on April 15. The AC7870 is AutoChips’ first multi-core high-frequency MCU chip to be based on the ARM Cortex-R52 processor. The AC7870 supports the ISO 26262 ASIL-D functional safety standard and has a built-in HSM (Hardware Security Module), meeting domestic and international requirements for hig...

News  Updated at: 2025/04/15

ro 50 Eco, it retains the same dimensions and weight of just 2.2 kg. Thanks to an analog and the new digital LIN interface, the new heater allows for custom configurations and centralized control. It has automatic altitude adjustment up to 4,000 meters above sea level as standard. It also meets the ISO 21434 cybersecurity and ISO 26262 functional safety standards. (From a press release dated April 8, 2025)...

News  Updated at: 2025/04/09

Green Hills Software adds TI’s new AM26x microcontroller platform On April 2, Green Hills Software announced the expansion of its products and services for microcontrollers by adding support for the newest Texas Instruments (TI) AM26x high-performance microcontrollers (MCUs) including the AM263x, AM263Px, and AM261x MCU portfolios. Green Hills Software’s ISO 26262 ASIL D-certified µ-velOSity real-time operating system (RTOS) provides the sma...

News  Updated at: 2025/04/04

FPT Industrial’s eBM 5 BMS technology achieves ISO 26262 ASIL C certification On March 31, FPT Industrial and its brand Potenza Technology announced that it has received ISO 26262 ASIL C certification from TÜV SÜD for the eBM 5 Battery Management System (BMS). Developed entirely in-house, the fifth-generation BMS features advanced technology. With a modular design, the eBM 5 supports both 400V and 800V battery systems. It can be customized fo...

News  Updated at: 2025/04/01

enable advanced fault detection and increase the reliability of the entire vehicle by preventing failure modes in the power supply network. The switches are housed in an 8-pin TO leadless package. The accuracy of the load current sense is ±5 percent after calibration. The switch family is PRO-SIL ISO switch 26262-ready. (Based on Infineon Technologies AG press release dated March 31, 2025)...

News  Updated at: 2025/03/31

SEALSQ, Switzerland partners with IC'ALPS, France to enhance ASICs for automotive functional safety On March 28, SEALSQ Corp, a semiconductor company, partnered with IC'ALPS, a leading ASIC design house specializing in custom circuits that meet IATF16949 standards and ISO 26262 functional safety requirements. This partnership will integrate SEALSQ's post-quantum secure technology into IC'ALPS' automotive ASIC designs, providing cryptographic resi...

News  Updated at: 2025/03/31

ETAS’ AUTOSAR Adaptive stack, RTA-VRTE receives ISO 26262 ASIL-B certification ETAS GmbH has officially received ISO 26262 ASIL-B certification from TÜV Süd for its AUTOSAR Adaptive stack, RTA-VRTE. This certification positions RTA-VRTE as a premier vehicle platform solution for developing safe and scalable next-generation automotive software architectures. It simplifies compliance with stringent safety regulations while allowing OEMs and sup...

News  Updated at: 2025/03/31

ctors to provide a combined hardware and software solution for developing and deploying safety-focused, mixed-criticality SDV zonal architectures based on NXP’s new S32K5 MCU family. The software solution features the ASIL D safety-certified. µ-velOSity real-time operating system (RTOS), the µ-visor hypervisor for MCUs, the industry-leading Green Hills Compilers, and advanced MULTI debugger with system visualization tools. This combination of...

News  Updated at: 2025/03/20

ctor company specializing in flash memory, 32-bit microcontrollers (MCUs), sensors, analog products, and solutions, announced that it will attend Embedded World and showcase its latest advances in flash and MCU technologies. GigaDevice's GD25/55 family of serial NOR flash has been certified to meet ISO 26262:2018 ASIL D automotive functional safety standards and strictly adheres to AEC-Q100 Grade 1. This 2 Mb to 2 GB capacity flash memory offers ...

News  Updated at: 2025/03/10

measurement, featuring 5mT SFI and a programmable linear transfer function with up to 17 points. System integration is simplified by the device’s broad operating temperature range of -40°C to 160°C and versatile data output options, including analog ratiometric and PWM signals. It complies with ISO 26262 as an ASIL B Safety Element out of Context (SEooC), making it well-suited for demanding, safety-critical automotive applications. Based on M...

News  Updated at: 2025/03/06

Infineon achieves ISO/SAE 21434 certification for AURIX TC4x On March 3, Infineon Technologies AG received ISO/SAE 21434 certification for its AURIX TC4Dx microcontroller. Infineon is also pursuing ISO/SAE 21434 certification for AURIX TC3x microcontroller family. The certification offers automotive manufacturers a foundation for secured and compliant vehicle electronics, reducing development complexity and accelerating time to market. The ISO/SA...

News  Updated at: 2025/03/03

ier 1 automotive supplier, to bring flax fibre composites to the automotive industry. The collaboration will offer manufacturers with a high-performance, lightweight, and eco-friendly alternative to plastic, glass, and carbon fibre, promoting sustainable vehicle production. SFG Composites, with its ISO9001-certified Dubai facility, will use Bcomp’s flax fibre reinforcements in its moulding and manufacturing processes. SFG’s high-capacity, pre...

News  Updated at: 2025/02/28

Electreon earns ISO/SAE 21434 cybersecurity certification for EV inductive charging On February 25, Electreon, a global leader in wireless EV charging, announced that it has achieved ISO/SAE 21434 certification for cybersecurity engineering in vehicles. Electreon's infrastructure enables EVs of any size or type to charge wirelessly—whether in motion, stopped, or inching through traffic and is designed for shared mobility, as well as for public ...

News  Updated at: 2025/02/26

CARIAD enhances automotive AI safety by bridging gaps with machine learning standards On February 18, CARIAD announced that it is integrating Machine Learning into automotive software which requires strict testing to ensure safety, reliability, and compliance standards. The following standards are important: ISO 29119: covers general software testing, including AI models. ISO PAS 8800: gives guidelines for AI in road vehicles but doesn’t speci...

News  Updated at: 2025/02/19