ed by multi-millisecond ranging (MMS) and narrowband assistance (NBA) extend operating range. IEEE 802.15.4ab also enhances radar mode, improving use cases such as child presence detection (CPD) in vehicles. The three SoCs introduced (ST64UWB-A100, ST64UWB-A500, and ST64UWB-C100) are built on 18 nm FD-SOI process. The ST64UWB-A series is designed for automotive applications and starting with the ST64UWB-A100 for use cases such as digital key and ...

News  Updated at: 2026/03/10

ties such as AI-enabled sensor fusion and over-the-air updates in next-generation SDVs. The device is compliant with ISO 26262 ASIL B standards and offers strong electromagnetic compatibility (EMC) performance, low quiescent current, remote wake capability, and compatibility with cost-efficient CAN FD common-mode chokes. (From a press release dated February 24, 2026)...

News  Updated at: 2026/02/26

orms. This agreement reflects a shared commitment to secure, resilient supply chains and aligns with U.S. priorities to strengthen domestic semiconductor production for economic and national security. Under this partnership, Renesas will gain further access to GF’s technology portfolio, including FDX (FD-SOI), BCD and feature-rich CMOS technologies with non-volatile memory features to support its SoCs, power devices and MCUs. Tape-outs under th...

News  Updated at: 2026/02/18

on custom platform solutions. It is based on CANape, Vector’s established measurement and calibration tool. The measurement configuration is set up once in CANape and then transferred to the target platform.  The software supports a broad range of networks and protocols, including XCP, CAN, CAN FD, LIN, FlexRay, Ethernet, and ADAS sensors such as radar, lidar, and video. (From a press release dated January 16, 2026)...

News  Updated at: 2026/01/20

Soitec and CEA, France, partner to develop automotive cybersecurity with advanced FD-SOI technology On October 20, Soitec and CEA presented Fully Depleted Silicon-on-Insulator (FD-SOI) substrates, which can deliver intrinsic protection against the threat of fault injection attacks, identified as an increasing risk by automotive cybersecurity ISO/SAE 21434 standard setters. Fault injection attacks occur when a hacker deliberately disrupts a chip...

News  Updated at: 2025/10/28

ESD diodes with 54 V, 60 V, and 72 V maximum reverse working voltages (VRWM). These ultra-low capacitance (down to 3.4 pF) devices are packaged in the widely used standard SOT23 package. The optimized capacitance ensures that signal integrity is not impacted even in higher-speed protocols like CAN-FD. Based on Nexperia press release ...

News  Updated at: 2025/07/02

rsion use Marelli’s standard modules for high-performance Adaptive Driving Beam (ADB) capabilities. The taillights deliver a "sculptural light display" using digital OLED 2.0 technology, enabling V2X communication. Marelli’s advanced electronic architecture, including LED/OLED driver with a CAN-FD interface, allows for seamless communication between dedicated hardware and software components. (From Marelli social media updates on June 23, 202...

News  Updated at: 2025/06/24

laborative partnership of the year” award at the AutoTech Awards. Combining OLEDWorks’ Atala OLED technology with Marelli’s system integration expertise, the cutting-edge taillamp features 60-segment digital OLED light panels. The individual control of each OLED segment is performed via a CAN-FD communication bus that connects the domain controller to the rear lamp gateway and the communication speed reaches 1Mb/s. This enables refreshing o...

News  Updated at: 2025/06/05

latest addition to its Automotive Data Logger family, designed specifically for Software-Defined Vehicle (SDV) verification and validation. It represents the latest innovation in capturing high-speed automotive Ethernet. In addition, it supports the logging of traditional interfaces, including CAN FD, LIN, and FlexRay. Equipped with two NVMe M.2 SSDs, each one offering up to 4TB of industrial-grade storage, the PM-350 ensures high recording rate...

News  Updated at: 2025/03/31

e of animation, complexity, and dynamic range.  With the inclusion of an integrated microcontroller unit, the MLX81116 enables enhanced LED control algorithms, precise color mixing, and thorough diagnostic functionalities. It uses MeLiBu high-speed communication technology. MeLiBu utilizes the CAN-FD physical layer and UART communication. It facilitated a smooth integration with the car's electrical/electronic architecture.  (Based on Melexis p...

News  Updated at: 2024/11/25

MCUs. It will present its existing sensor portfolio, including the E524.17 and E521.42 for ultrasonic solutions as well as the smallest and most cost-effective LiDAR system based on the E527.40 SPAD imager and E527.50/51 laser driver. It will present an OLED driver IC E522.96 with a high-speed CAN/FD interface. The E522.96 can control up to 48 OLED segments or LEDs simultaneously.  It will present the high-precision brake pressure IC for brake-...

News  Updated at: 2024/10/25

STMicroelectronics presents 18nm FD-SOI with embedded phase change memory (ePCM) On March 19, STMicroelectronics announced an advanced process based on 18nm Fully Depleted Silicon On Insulator (FD-SOI) technology with embedded phase change memory (ePCM) to support next-generation embedded processing devices.  This new process technology is co-developed by ST and Samsung Foundry. It allows higher levels of integration of analog and digital periph...

News  Updated at: 2024/03/20

Technologies AG launched the new Automotive PSoC 4100S Max family. This microcontroller device family expands Infineon’s portfolio of CAPSENSE-enabled human-machine interface (HMI) solutions for automotive body/HVAC and steering wheel applications by delivering higher flash densities, GPIOs, CAN-FD, and HW-Security. It offers 10x higher sensitivity and is available in 100-TQFP (14x14 mm²), 64-TQFP (10x10 mm²), and 48-QFN (7x7 mm²) packages....

News  Updated at: 2024/03/01

r, receiver, and processor. It is the first high-count channel array “massive MIMO” imaging radar chipset solution. The company is currently in the final AEC-Q100 qualification process. The chipset enables high-end performance with 2,304 virtual channels. The chips are manufactured with a 22 nm FD-SOI (Fully-Depleted Silicon-on-Insulator) process. It is designed for Tier 1 radar system production and OEM development programs. The production i...

News  Updated at: 2024/01/10

of and seat position, seat belt pretensioners, trunk, etc. It adds the power and analog functions as well as extensive software libraries required for motor control to NXP’s S32K microcontrollers. The S32M2 also combines advanced compute with MOSFET gate drivers, physical layer interfaces for CAN FD and LIN communication, and a voltage regulator. Moreover, the S32M2 provides functional safety compliance with ISO 26262 (ASIL B). This S32M2 will ...

News  Updated at: 2023/11/08

erface Card. The platform is compatible with lithium-ion battery cells, monitoring up to 12 cells individually per module. By combining up to 20 modules, it supports up to 1,000 V batteries. Its communication interfaces include iso-UART and iso-SPI for Ring Mode, dual Ethernet ports, and triple CAN-FD ports. It also provides high-side and low-side drivers for external contactors. The low-level drivers are implemented for the various components of...

News  Updated at: 2023/10/12

duced the new SPSB081 automotive power-management ICs that help simplify the design of car-body controllers for a sunroof, seats, tailgate, doors, and lighting modules. The features include a main fixed-voltage low-dropout regulator (LDO), a secondary programmable LDO, four high-side drivers, a CAN FD transceiver, and an optional LIN transceiver. They provide various standby modes with low quiescent current and programmable local or remote wake-u...

News  Updated at: 2023/10/04

Infineon reveals new MOTIX MCU embedded power IC-families for automotive motor control Infineon Technologies AG announced the launch of the new MOTIX microcontroller unit (MCU) embedded power integrated circuit (IC)-families, the TLE988x and TLE989x. Infineon has integrated a gate driver, microcontroller, communication interface, and power supply into a single chip.The new products feature CAN (FD) as the communication interface. They offer fast ...

News  Updated at: 2023/08/08

U, a high-performance solenoid valve drive controller tailored by UAES for electronically controlled suspension systems, integrates a 32-bit high-performance processor, a high-precision proportional solenoid valve drive channel, and a six-axis inertial sensor, supporting such functions as PSI5, CAN-FD, and FOTA, and meeting the application needs of such architecture as Cyber Security and AUTOSAR as well as ISO 26262 ASIL-D functional safety requi...

News  Updated at: 2023/07/10

with a diameter of 300 mm per year, using technologies and manufacturing processes that are not yet present in Europe.It will be operational at full capacity by 2027.It will enable the establishment, in Europe, of a large-scale production site for high-performance chips, intended in particular for FD-SOI technology (device "silicon on insulator completely deserted”).The project will enable large-scale production of energy-efficient and secure ...

News  Updated at: 2023/05/01