[Guangzhou Guangqi Ogihara Die&Stamping Co., Ltd.] Center floor pan assembly 2012 Guangzhou International Auto Parts & Accessories Exhibition GAC Component Co., Ltd. (Formerly Guangzhou Automobile Group Component Co., Ltd.)
[Guangzhou Guangqi Ogihara Die&Stamping Co., Ltd.] Front side rail assembly 2012 Guangzhou International Auto Parts & Accessories Exhibition GAC Component Co., Ltd. (Formerly Guangzhou Automobile Group Component Co., Ltd.)
Integral molding by hot stamping reduces the number of parts from 11 to 1. On the rear side, the processing method can be changed and thin sheets can be used for energy absorption. One side is softer and more impact energy absorbent than the other side (red part) by infrared baking technology. On the other, thin sheets are integrally formed using spot welding (5th panel).
×
Supplier Database
Car body frame integration - Door ring Automotive World 2025 UNIPRES Corporation
Integral forming by hot stamping has reduced the number of parts from the conventional 10 parts to three. Normally, the lower door ring part in blue is also formed in one step, but the company secured strength by combining separate parts from the front to the rear. The part outlined by the white line uses a patchwork forming technique in which two sheets are stacked on top of each other.
×
Supplier Database
Aluminum alloy plate by hot stamping technology Automotive World 2025 H-ONE Co., Ltd.
Complete battery packs highlight Company's expertise across range of fields, including stamping to reduce weight and cost, thermal management, control systems, and battery cell chemistry.
×
Supplier Database
Battery pack Advanced Clean Transportation Expo 2024 Schaeffler AG
-Flat cooling plates optimize battery performance -Modular system provides flexibility for multiple vehicle development platforms. -Prismatic/ Pouch battery cells cooling -Material: aluminum -Manufacturing technology: Stamping +brazing -OBC, DC-DC converter cooling -This cooling plates provide cooling capacity in a more compact package with reduced weight and cost and the plate design also compensate for assembly tolerances.
×
Supplier Database
Body structure parts made of cold 1470 Mpa material 2023 JSAE Automotive Engineering Exposition Futaba Industrial Co., Ltd.
-Reduced springback by changing the shape. -Since processing is performed at room temperature, carbon dioxide emissions from the manufacturing process are lower than those of hot stamping. -Adopted for Toyota Prius.
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)