Automatic transmission with torque converter designed for commercial vehicles; Transmission has a wider gear range for improved torque at launch and higher top gear for improved fuel economy; Provides 30% improved acceleration when shifting compared to automatic 6-speed transmissions and offers 10% improved fuel efficiency
×
Supplier Database
Suspension system related parts Auto Shanghai 2025 Tenneco Inc.
This device projects an image onto the door panel by projecting a laser beam from the bottom of the mirror. The light source and projection unit are separate, with the light source installed under the door panel. The image emitted from the light source passes through optical fiber and is projected onto the door panel from the projection unit. The image projected onto the window is projected from the projection unit at the top left of the door panel. The projection device at the bottom of the mirror can also be built into the mirror.
AISIN has achieved top-class, electric mileage among electric units by employing new technologies including the optimization of motor magnet arrangement and the use of low-viscosity oil for electric units.
×
Supplier Database
16. Upper Tie Bar 6082 The Detroit Auto Show 2025 Benteler Group (Benteler Automobiltechnik GmbH)
Max output torque<10,000 Nm Top speed: 250 km/h Silicon carbide inverter: up to 900 V Oil cooled motor, peak system efficiency: 95.5% Torque density>75 Nm/kg Max GVWR: 3500 kg Max GCWR: 6000 kg
×
Supplier Database
PTFE porous material Automotive World 2025 Sumitomo Electric Industries, Ltd.
-Fluoropolymer. The characteristics of PTFE porous membrane are utilized to prevent the ingress of dust and water droplets while ensuring air permeability. -The columns are filled with air at the bottom and water at the top, each with a filter of PTFE porous material. Demonstrates the ability to blow air out from the bottom but not water, allowing air to pass through.
×
Supplier Database
Car body frame integration - Door ring Automotive World 2025 UNIPRES Corporation
Integral forming by hot stamping has reduced the number of parts from the conventional 10 parts to three. Normally, the lower door ring part in blue is also formed in one step, but the company secured strength by combining separate parts from the front to the rear. The part outlined by the white line uses a patchwork forming technique in which two sheets are stacked on top of each other.
×
Supplier Database
Top Load Type Panoramic Sunroof International Suppliers Fair (IZB) 2024 Aisin Corporation (Formerly Aisin Seiki Co., Ltd.)
-Triple-layered current collector consisting of a porous polymer film with copper coated on the top so as not to fill the holes and aluminum on the bottom. The movement of lithium ions through holes in the current collector allows more current to flow. -The technology, the result of joint research between the company and Stanford University, can quadruple the output of a lithium-ion battery while doubling the current flow rate
×
Supplier Database
Battery cell cap The Battery Show North America 2024 Hoerbiger Holding AG
24 V air conditioning unit for work trucks and recreational vehicles; Has up to 8,500 BTU cooling capacity at max power consumption 51 A; An eco mode has 3,000 BTU of cooling capacity at 17.5 A power consumption; System is powered by vehicle's battery with a low-voltage cutoff
Battery terminals featuring custom designs, compatibility with SAE and DIN configurations, various post sizes and top-down design. The terminals have best-in-class post retention strength of approximately 3,000 N.
×
Supplier Database
Softtop Roof System 2024 JSAE Automotive Engineering Exposition Magna International Inc.
Lightweight design using light metals optimized through meticulous simulations and calculations, combining classic styling with innovative concepts. Noise-insulating top cover solution for high sound absorption requirements, even under tight packaging conditions.
×
Supplier Database
Top-stream cylindrical 6C ultra-high power battery 2024 Auto China - Beijing International Automotive Exhibition CALB Group Co., Ltd. (Formerly CALB Co., Ltd.)