The Company is developing technologies for joining dissimilar materials, such as castings and extrusions. M12 pierced nut: Large brim, high strength, one-step installation, intended for EV battery assembly.
×
Supplier Database
Car body frame integration - Door ring Automotive World 2025 UNIPRES Corporation
Integral forming by hot stamping has reduced the number of parts from the conventional 10 parts to three. Normally, the lower door ring part in blue is also formed in one step, but the company secured strength by combining separate parts from the front to the rear. The part outlined by the white line uses a patchwork forming technique in which two sheets are stacked on top of each other.
×
Supplier Database
60V input / 80V absolute step-down DC/DC controller electronica China 2024 Nisshinbo Holdings Inc.
- Fine steps and microdot mirror surface processing technologies for "high value-added lighting" where the design stands out with LEDs - Key Technology: microfabrication step, micro dot mirror finish, fine mirror finishing, diffraction grating, fresnel・micro lens array
×
Supplier Database
Wet-type clutch disc and wet cutch disc for EVs 2023 JSAE Automotive Engineering Exposition EXEDY Corporation
- The material of the friction material and the design of the grooves and shapes can be customized to match customer needs. - The friction material for EVs adopts a shape called multi-step groove. By adopting a friction material shape with large and small grooves, the flow of ATF is changed and the resistance is reduced. Material costs can also be reduced.
×
Supplier Database
In-wheel motor 2023 Auto China - Shanghai International Automobile Industry Exhibition Schaeffler Group (China)
- High and low voltage motors (300 to 800V, 48V) are suitable for single or dual step gear sets. - Can be used for passenger cars, logistics vehicles, and other specialty vehicles.
-A step that does not require a motor and comes out from under the door when the sliding door opens and closes. -Without a motor, the cost is reduced by 70% compared to conventional electrically operated products. -Installed model: Toyota "Noah Voxy".
×
Supplier Database
In-wheel motor 2023 Auto China - Shanghai International Automobile Industry Exhibition Schaeffler AG
- High and low voltage motors (300 to 800V, 48V) are suitable for single or dual step gear sets. - Can be used for passenger cars, logistics vehicles, and other specialty vehicles.
×
Supplier Database
Park release valve IAA TRANSPORTATION 2022 ZF Friedrichshafen AG
-2nd generation brake-by-wire. -Series production will start from 2022. -The one-box system integrates the master cylinder, brake booster and control system (ABS and ESC) into a single compact and lightweight module. -This modular system is a step towards a pure dry brake system, that does not need brake fluid, and in addition it is expected to contribute to the realization of highly automated driving. -The first generation MK C1 brake system is equipped on some Audi models, the Volvo XC60 and S90, and the Ford Mustang MACH-E-GT which was displayed at the IAA Mobility 2021.
×
Supplier Database
Air Intake Module with Multi-step Tumble Control Valve System 2019 JSAE Automotive Engineering Exposition MAHLE GmbH