By switching from aluminum to plastic, the part is smaller, lighter and more electrically insulating. Plastic-metal bonding technology and DSI molding technology are used in its production. Plastic-metal bonding technology is a technology that uses a laser to roughen the metal surface before insert molding, making it easier to bond dissimilar metal and plastic. DSI (Die Slide Injection) molding technology is a technology that allows hollow parts to be manufactured without changing the mold by sliding the mold between the primary and secondary injections.
×
Supplier Database
Water jacket 2025 JSAE Automotive Engineering Exposition MAHLE GmbH
-The lid of the inverter case. By replacing the conventional metal material with plastic, the weight has been reduced by approximately 45% (compared to aluminum). It is made of PPS. -Used in Nissan Ariya.
×
Supplier Database
Plastic window regulator Auto Shanghai 2025 Grupo Antolin-Irausa, S.A.
Heating, Ventilation, and Air Conditioning (HVAC) systems are key to ensuring passenger comfort in any vehicle. It is made up of Plastic through moulding process and it houses several components for Air conditioning: Evaporator, Blower, Actuator, Heater Core, Expansion Valve / Orifice Tube, Sensor
×
Supplier Database
Split Type HVAC Bharat Mobility Global Expo 2025 Anand Automotive Private Limited (Formerly Anand Automotive Limited)
Heating, Ventilation, and Air Conditioning (HVAC) systems are key to ensuring passenger comfort in any vehicle. It is made up of plastic through moulding process and it houses several components for air conditioning: Evaporator, Blower, Actuator, Heater Core, Expansion Valve / Orifice Tube, Sensor
The accelerator-pedal module (APM) consists of plastic accelerator pedal and an angular-position sensor as potentiometer or touchless hall-effect sensor. This sensor registers the movement and position of the accelerator pedal to calculate required torque. The signal can be output in analog or digital form.
×
Supplier Database
High Pressure Hydrogen Strage World Smart Energy Week 2025 March OPmobility SE (Formerly Compagnie Plastic Omnium SE)
PEM Fuel Cell Stack module by EKPO High power performances Plug-and-play system include DC/DC converter enabling system parallelization Max efficiency over 60%
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)