This assembly contains multiple materials, advanced technologies, and joining processes, resulting in high added value. It involved the joining of 3rd generation advanced high strength steels (3rd Gen AHSS) with aluminum, using a combination of structural adhesives, and advanced fastening and welding techniques. These assemblies were placed in both ICE and plug-in hybrid variants, showcasing how Martinrea's flexible manufacturing processes can accommodate different vehicles.
×
Supplier Database
Direction of ICE technology development 2025 JSAE Automotive Engineering Exposition Astemo, Ltd. (Formerly Hitachi Astemo, Ltd. )
Maximum ICE torque up to 320Nm Voltage range: 400V or 800V Generator peak power: up to 170kW Traction motor: Peak power up to 210kW; Peak torque up to 360Nm
×
Supplier Database
Rear Wiper Motor WM18 Bharat Mobility Global Expo 2025 Mitsuba Corporation
Motor type: Brushless Vehicles where product can be installed: ICE vehicle, xEV(next generation vehicle) Supports single sided drive and double sided drive Drive unit - Speed detection sensor, water and dust resistance Controller - Built-in latch motor control and buzzer drive circuit
×
Supplier Database
Fan motor PM18 shroud assembly Bharat Mobility Global Expo 2025 Mitsuba Corporation
It is a cam torque actuator for delivering better fuel economy and reduced emissions for ICE Vehicles and Hybrid Vehicles by combining cam torque actuation (CTA) and torsional assist (TA) phaser technologies.
It consists of master cylinder, booster and ABS/ESC into one unit. It is an electronic vacuum-less brake apply and modulation system suitable for ICE, Hybrid or BEV vehicles.
×
Supplier Database
SCR system for H2 ICE World Smart Energy Week 2025 March OPmobility SE (Formerly Compagnie Plastic Omnium SE)
Gestamp is showcasing its modular chassis platform, known as the Multipath Platform Concept, demonstrating how production can be efficiently adapted for various powertrains, including internal combustion engines (ICE), plug-in hybrids (PHEV), and battery-electric vehicles (BEV). The use of a single base frame cuts tooling investment by up to 50% and facilitates a more efficient manufacturing for different vehicle models.
×
Supplier Database
Diret Coil NEDD Disconnect The Battery Show North America 2024 Linamar Corporation
-Fuel / CO2 savings -High packaging flexibility -Vehicle speed adjusted steering feeling -Simplification of ICE gear set with less vibrations and ICE friction loss reduction at cranking -Ready for pure electric driving-capable hybrids and EVs -Lower oil temperature due to reduction of flow losses