Using a small projector and holographic diffusion film, the rear window is transformed into an external display screen Projection area: 297×420mm, PGU size <0.5L
-Compared to an EV without a heat source that is heated only by air conditioning, the combined use of a radiant heater and air conditioning can provide the same warmth while using about 14% less energy. -The heater also features a safety design that lowers the temperature of the contact area the moment it is touched, and also lowers the heater temperature while contact is detected. -Installed in Toyota's bZ4X, RZ, and RX models.
Attached to the lower part of the battery, it detects the location and intensity of the impact based on changes in air pressure. Data can be used for battery repair, etc. The exhibit includes a demonstration in which lights glow according to the location and size of the impact. The area to the right of the impact site glows blue and the area to the left glows yellow, and the data is graphed as two lines and can be viewed on the panel.
×
Supplier Database
Folding roof with a large opening Auto Shanghai 2025 Webasto SE
Dual-zone climate control is a system that allows the vehicle’s front-seat passengers to set their own preferred temperature for their “zone,” or their area of the front cabin. It’s a smarter, more personalized version of basic automatic climate control systems that let you set a single temperature for the whole cabin.
×
Supplier Database
Seatbelt - Lap Pre-Tensioner Bharat Mobility Global Expo 2025 Anand Automotive Limited
The lap pretensioner supports the pre-tensioning of the seatbelt in the pelvis area, to reduce the risk of submarining. The device can be mounted into the seat, under the trim or along the sill board due to the slim design.
×
Supplier Database
Seatbelt - Lap Pre-Tensioner Bharat Mobility Global Expo 2025 Joyson Safety Systems (Formerly Key Safety Systems, Inc.)
The lap pretensioner supports the pre-tensioning of the seatbelt in the pelvis area, to reduce the risk of submarining. The device can be mounted into the seat, under the trim or along the sill board due to the slim design.
The electronic throttle valve controls the intake manifold cross-section area to regulate air supply in the combustion chamber. The air management system uses the electric actuators to regulate the air mass supply with absolute precision. It has 32–64 mm throttle valve diameter, −40°C to +180°C temperature air duct.
Technology that can integrated with a variety of display types including TFT and OLED, resolutions and sizes, which dims a specific screen or area when viewed from an angle to avoid driver distraction; Privacy areas are customizable, while the privacy display has lower power consumption compared to multi-backlight solutions
×
Supplier Database
Roof projection Automotive World 2025 Nippon Seiki Co., Ltd.
- Blade-type cooling system that cools the sides of cylindrical cells. - Compared to the bottom cooling of a typical rectangular battery, this system allows for a larger contact area. In addition to ensuring uniformity of cooling, thermal expansion of the battery can also be absorbed.
×
Supplier Database
eAxle oil filter cartridge The Battery Show North America 2024 MANN+HUMMEL GmbH
STA79 is an ideal solution for side turn assist and lane change operations. The PreView Side Turn Assist (STA) 79 has a wide horizontal field of view up to 180° (90° fore and 90° aft) providing side blind zone coverage along the length of the vehicle. It is designed to ignore stationary objects such as guardrails and parked cars while alerting on moving objects such as bicyclists and vehicles in the adjacent lane. The detection Area of Interest is adjustable up to 10 meters fore, 5 meters out (3 meters for LCA) and 50 meters aft of the sensor mounting location.
Unidirectional pouch cell with high heat dissipation due to large surface area; Has 186 Wh/kih specific energy density, 384 Wh/L volumetric energy density, and mass of 1.08 kg; Manufactured in Midland, Michigan
×
Supplier Database
HD Lighting 2024 JSAE Automotive Engineering Exposition Ichikoh Industries, Ltd.
Seats that contribute to improved energy efficiency through air conditioning closer to the occupants. Heating: In addition to directly warming the neck, which easily senses temperature, the seat pressure is adjusted to increase the contact area with the seat by 11% to improve the heater warming sensation. Cooling: Utilizes cool air flow to the neck, seat ventilation system, etc. Seat pressure adjustment reduces the contact area by 7%.
×
Supplier Database
Tail Lamp 2024 JSAE Automotive Engineering Exposition ams-OSRAM AG